Video není dostupné.
Omlouváme se.
LC 500 Exhaust Valve Controller Install Walkthrough
Vložit
- čas přidán 6. 08. 2024
- Instructions on installing your exhaust valve controller.
Available for purchase here: www.etsy.com/listing/10677438...
Written instruction here:
ofcourcy.com/docs/LC500.pdf
00:00 - Intro
00:39 - Removing carpet and load floor
01:10 - Removing hooks and bolts
03:08 - Lifting panels and foam insert up
04:42 - Accessing the plugs
05:35 - Removing the plugs
07:14 - Installing the harness
10:03 - Installing the module
11:04 - Testing
12:44 - Putting everything back together
15:33 - Pairing remote with Homelink
Just installed this. Damn bro! What a difference. Those blue plugs were terrible to remove. I ended up disconnecting the battery and the other plugs in the way. Still a hassle. Also to anyone who does this you have to make sure the new harness clips in and clicks. Requires a lot of pressure.
Just installed mine it sounds great. Many thanks!
Thank you!! I’ll be getting this my lc500
Awesome , sounds good too.
Just installed today, it sounds way betterrrrrrrrrr🎉
perfectly explained. it works awesome
Great video, I’m going to order one. Question for those whose has this mod installed: which option do you have the module shipped with? Open, Closed, Car control, remember last mode? Or it doesn’t matter? Thanks in advance
Has anyone been able to simply reprogram the onboard exhaust change valve control module to set custom exhaust settings? It would be cool if I can switch it to Sport + on the car and have it always open.
Curious why you dont just remove the 3 tree plugs on the side wall to have access to thise 2 plugs--guess I will find out in a bit how hard it is to relocate to put them back
Okay, trying this on the convertible was a challenge. I do have one question because I'm not completely sure I did the right connections. What would happen if you cross-connected the two plugs i.e. blue 1 with white 2. Would you get a partial valve opening in either mode?
any issues after install?
I tried buying one from etsy and the order was cancelled? It's there another way to get it
Hi there, just received mine and installing right now. Got to the stage where I test the exhaust opening and closing however only one side (rear right) opens and closes with the remote. The left does not change? I’ve tried checking all connections and they are tightly connected.
Any suggestions?
What does it do if you diconnect it and put it back to stock?
You have lc500h version?
After installation, the inside (right) muffler of the pair was open and when toggled, the left side of the pair was open. Which side of the pair is the open valve?
Disregard, just viewed another video that described the outside pipe of each pair being the open valve.
I tried to install that controller on my 2022 LC500 convertible. However, I gave up because the blue couplers were too far away to reach. Have the wiring locations changed a bit?
I did it, but I'm not sure that I didn't cross them up. ?????
No danger of a demo then 😅.
After reading the comments I'll look for a better kit.
Great video. Where can you purchase this?
Do they deliver to Australia?
Does it stay open on power off then on? Any parasitic drain from controller when car is off?
You can choose what state it powers on in. It can also remember the last mode it was in
This module runs off the same power source as the valves which do not turn on until engine is on, so no power draw unless engine is on. Downside is that you can not control the valves in accessory mode.
Where can I purchase this ?
It’s in the description
That's it. Screw around with a perfect car. Why not? If your goal is to make it sound like a piece of junk, you've succeeded. Do you not think the Lexus engineers tried to make the best possible car they could make? Now you have a loud, fluttering, broken sounding piece of crap so enjoy it.
Hey sir, it doesn’t ruin the sound.
More of letting it opening 100% of the time or closing