I have just installed the Titanium mover and found that when the unit is loose with the 20 mm spacer is in place its ok; as soon as you tighten the unit up the gap must get less because trying to remove the 20mm spacer out from between the mover and the tyre is quite an effort. I suppose that when the unit is loose it hangs at a peculiar angle so that when tightened the angle changes and it forces the 20 mm spacer tighter into the tyre. Not sure if this is an issue but when I tested it it worked just fine.
I have just installed the Titanium mover and found that when the unit is loose with the 20 mm spacer is in place its ok; as soon as you tighten the unit up the gap must get less because trying to remove the 20mm spacer out from between the mover and the tyre is quite an effort. I suppose that when the unit is loose it hangs at a peculiar angle so that when tightened the angle changes and it forces the 20 mm spacer tighter into the tyre. Not sure if this is an issue but when I tested it it worked just fine.
What should the gap be between the wheel and the roller on a power touch motor mover
Gees, whata gadget... where do I get one of these?
Jenny Evans www.purpleline.com.au is the best place to get information. You can call them on 03 9588 2959 and they are based in Melbourne
How do I replace the grit rollers on my powrtouch powrmover has anyone ever done it cus I need help
No