How to Install Raspberri Pi camera and Troubleshoot errors | Upgrade Bios Firmware on Raspberry Pi
Vložit
- čas přidán 27. 07. 2024
- This video is step by step detailed tutorial on how to correctly install raspberry pi Camera on Raspberry Pi 4 8 GB.
The webcam camera module can be adapted to the Raspberry Pi 3 Model B+/3/2/B+ to provide you with high-quality playback images.
The camera template uses Omni Vision OV5647 QSXGA (5 megapixel) CMOS color sensor with a maximum of 2592 * 1944 pixels, which provides clear images.
The webcam's camera module supports up to 90fps video in VGA and 30fps 1080p video when using the H.264 (AVC) codec.
This video also sescribes on how to troubleshoot the errors that you get while installing the camera like
Commands not found
ERROR: the system appears to be configured for the legacy camera stack
Additionally this tutorial will also guide on how to upgrade the firmware or BIOS on the raspberry Pi Module.
libcamera is a new software library aimed at supporting complex camera systems directly from the Linux operating system. In the case of the Raspberry Pi it enables us to drive the camera system directly from open source code running on ARM processors. The proprietary code running on the Broadcom GPU, and to which users have no access at all, is almost completely by-passed.
libcamera presents a C++ API to applications and works at the level of configuring the camera and then allowing an application to request image frames. These image buffers reside in system memory and can be passed directly to still image encoders (such as JPEG) or to video encoders (such as h.264), though such ancillary functions as encoding images or displaying them are strictly beyond the purview of libcamera itself.
For this reason Raspberry Pi supplies a small set of example libcamera-apps. These are simple applications, built on top of libcamera, and are designed largely to emulate the function of the legacy stack built on Broadcom’s propretary GPU code (some users will recognise these legacy applications as raspstill and raspivid). The applications we provide are:
libcamera-hello A simple "hello world" application which starts a camera preview stream and displays it on the screen.
libcamera-jpeg A simple application to run a preview window and then capture high resolution still images.
libcamera-still A more complex still image capture application which emulates more of the features of raspistill.
libcamera-vid A video capture application.
libcamera-raw A basic application for capturing raw (unprocessed Bayer) frames directly from the sensor.
libcamera-detect This application is not built by default, but users can build it if they have TensorFlow Lite installed on their Raspberry Pi. It captures JPEG images when certain objects are detected.
COMMANDS:
Upgrade BIOS
sudo rpi-update
Enable Camera Module
sudo raspi-config
EDIT CONFIG FILE
sudo su
Sudo nano /boot/config.txt
ADD/Remove Lines
#start_x=1 [comment this line]
camera_auto_detect=1 [ADD this line]
gpu_mem=256 [Update this line from 128 to 256]
UNBOXING OF RASPBERRY PI 4
• ZWO ASIAIR PRO REPLACE...
HOW TO ASSEMBLE RASPBERRY PI 4
• HOW TO ASSEMBLE RASPBE...
INSTALL UBUNTU x64 ON RASPBERRY PI 4
• HOW TO INSTALL 64 BIT ...
AMAZON LINK:
Raspberry PI 4 8GB
amzn.to/3kWuAKj
Raspberry Pi Camera
www.amazon.com.mx/gp/product/...
Please stay tuned to my channel page for latest publishing schedule for the current month.
Author: Rahull Verrma
Channel: AstroShootingStars
Website: www.astroshootingstars.com
Facebook: / astroshootingstars
Twitter: / astshootingstar
Pinterest: / astroshootingstars
THIS VIDEO IS FOR EDUCATIONAL PURPOSES ONLY!
#astroshootingstars #Astronomy #Astrophotography #DeepSpace - Věda a technologie
Thank-you for your detailed video. I had lost my camera settings somehow and have been unable to get it to work since. Editing the config.txt file and adding back the camera_auto_detect=1 line brought it back. Great
Thank you i am glad it helped. Please stay tuned to my channel for my future videos
FINALLY!!! Someone who fixed my problem. Thank you! I thought, my cam or Pi was fried or sth.. wasn't able to see the preview photos, but when i went to home directory and loaded the test.jpeg... man!! TY
I am glad it helped. Please stay tuned to my channel for my future videos
Great tutorial, many thanks. Just used it on RPI48 with camera module v3.
I am glad you liked it. Please stay tuned to my channel for my future videos
FINALLY got my camera to work after this video. Thanks!
I am glad this helped. Please stay tuned to my channel for my future videos
Thank you so much. We tried for hours before stumbling on your video to fix the camera issue
I am glad it helped. Please stay tuned to my channel for my future videos
Thanks a lot man
It worked and more importantly hats off to you to give a detailed video 🙏🙏🙏
I am glad it helped. Please stay tuned to my channel for my future videos
This resolved my issue. Thank you so much!!
i am glad it helped. please stay tuned to my channel for my future videos
SOOOO GRATEFUL, MAN! You saved me after 2 hours of unknown issue. Thx a lot!!!
I am glad it helped. Please stay tuned to my channel for my future videos
Thank you so much for this video...finally the camera is working
I am glad it helped. please stay tuned to my channel for my future videos
Nice viedo bro, finally I can use the camera.
I am glad it helped. Please stay tuned to my channel for my future videos
Witam, bardzo przejrzyście wytłumaczone. Dziękuję bardzo. Życzę wszystkiego dobrego
the only tutorial that helped me, thank you!
I am glad it helped. please stay tuned to my channel for my future videos.
thanks so much bro i have been trying to fix this for weeks 😅😅
i am glad it helped. please stay tuned to my channel for my future videos
I was stuck at this error for hours, thanks for the solution.
i am glad it helped. please stay tuned to my channel for my future videos
Thankyou so much, This method works.
I am glad it helped. Please stay tuned to my channel for my future videos
I'm having an issue. I enabled the legacy Camera in Rasp-Config, rebooted, and when I went to do raspistill, it gave me a list of directions and not what was displayed in this video. When I tried Libcamera, it did not run.
I've followed the tutorial, I have the camera plugged into the correct port the correct way. I'm running Raspberry Pi 64 on a Raspberry Pi 4
I've updated the firmware and updated the Pi. The camera is an Arducam 16mp. The Pi has a fresh load of the OS installed.
awesome video! Finally got the camera to work! Thx so much 🙏
I am glad it helped. Please stay tuned to my channel for my future videos
Thanks man you saved my money🙏
I am glad it helped. please stay tuned to my channel for my future videos
Brilliance!!!!!!!!!!!!!!!!!!!!!!!!
I user all command raspistill and got errors!
THANKSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSSS
Thank you so much bruh🙏🙏
I am glad it helped. Please stay tuned to my channel for my future videos
thank you, it works
I am glad it worked. Please stay tuned to my channel for my future videos
Thank you So much for the tutorial It was very helpful
i am glad it helped. Please stay tuned to my channel for my future videos.
In my pi picture is captured in the terminal but while running in thonny aur through it is not working. It shows the error of the empty camera. If possible could you please share a code to run in thonny to capture picture
Thank you for the video. When i open my configuration screen the option to activate camera isn't on the list. Can you please help me figure out what to do? I think the board or module might be issue but I'm not sure. Thank you.
Thank you!!!
I am glad it helped. Please stay tuned to my channel for my future videos
I can take videos and pictures with my camera. When I open "jitsi meet" in the browser, the "Chromium" browser does not recognize my camera. What can I do?
super and thank you very muchhhhh
i am glad it helped. please stay tuned to my channel for my future videos
Thank you ❤
I am glad it helped. Please stay tuned to my channel for my future videos
Great video and good documentation. Now I want to control taking a video, is there a limit to how much it records. Basically, I'd like to duplicate what a RING camera does. And I'd like to know how to create a script so I can take a photo or video with one click, setting video for 20 seconds.
thanks a lot
I am glad you liked it. Please stay tuned to my channel for my future videos
Merci beaucoup !
Je suis content que cela ait aidé. merci de rester abonné à ma chaîne pour mes prochaines vidéos
But how the rapstill -o image.jpg command not found how to solve this error
After typing "sudo libcamera-hello", the camera feed appears for a while then closes and receive error in terminal "XDG_RUNTIME_DIR not set in environment". How to solve this? Please reply
Same here, **no cameras available**
Which raspberry pi you are using and which operating system ?
@@AstroShootingStars I am using Raspberry Pi 4 Model B and Raspberry Pi OS
same issue happened, Anyone got solutions for this ?
upgrade raspi and reboot
Thank you so much.
You're so kind and smart....
Thank you. I am glad it helped. Please stay tuned to my channel for my future videos
Hello sir, may i ask which os did u use? I used bullseye, after enabling legacy camera, vnc cannot display desktop
This is the raspberry pi os 64 bit version. I have another video on my channel to install the rsapi os. Also instead of vnc use xrdp which is more reliable whose video is also on my channel. I hope this helps. Please stay tuned to my channel for my future videos
Thanks for this.
This videos only shows how to capture still images. Please make a video on Camera video recording . If possible automatically with any sensor like iR.
Tried with libcamera-vid but not working
sure mu friend i will soon make video on how to capture video from the camera. I hope this video helped. Please stay tuned to my channel for my future videos
Hi. I've made a program that needs to detect faces to work. I have the ribbon cable IR camera and it works fine with the commands and I've activated it in the settings. But my program just won't work with the raspberry pi camera, only a webcam I plug in via USB
If you create those program with help of internet code they normally are designed to work with usb based devices , please lookup for a part where you can select the source , for rspi i have given you commands to capture the image from rspi camera which you can process to detect objects. I hope this helps. Please stay tuned to my channel for my future videos
sir will u provide complete text to paste in cofig I don't text in it I typed until visible by leaving comment
we are running into errors when we try to use the camera with a python code, could you help with that
Hi! Thanks. I connected the HDMI to CSI adapter to the Raspberry Pi. Now I get this error message:No protocol specified
Preview window unavailable
[0:01:08.794926971] [1478] INFO Camera camera_manager.cpp:293 libcamera v0.0.0+3700-f30ad033
ERROR: *** no cameras available ***
Do I still need to install additional drivers? And if so, how? Thank you for your help.
There could be 4 issues, that i can think of
1. Camera cable installed in wrong direction
2. Camera cable loose connection
3. Camera not enabled in firmware settings
4. Not using rspi4
I hope this helps. Please stay tuned to my channel for my future videos
@@AstroShootingStars Thanks for answer. Point 1./2./4. should be ok. How can i check the point 4.?
Which is the type or raspberry pi you are using ? . Also try replacing the cable it could be damaged too
@@AstroShootingStars Raspberry Pi 4 Computer, model B, 8GB RAM. i changed the cable. The same message.
"The legacy camera stack is not available in the 64-bit version of Raspberry Pi OS, it cannot be re-enabled on the 64-bit OS."
the camera option does not appear when I run the raspi-config command, What could be the problem?
I am facing the same problem...is this problem solved?
Same problem
Camera option is not there in interface option and also in raspi-config what could possibly go wrong?
Same issue, did anyone find any solution?
its because new raspberry pi os have camera auto detect enabled by default
Could you please do a video regarding how to install 64mp camera in Rasberry pi 4 with full option .that is,digital zoom,autofocus and face focus.Looking forward for that video. thank you
Yes my friend i have that video in pipeline. I hope this video helped. Please stay tuned to my channel for my future videos
I'm facing a problem. In the interface option, no option for camera is showing. Please help me about how to solve the issue
I have an issue, rpi-update command not found
Hi, can i ask why after i use command which is sudo rpi-update, and i command the reboot but after the reboot my raspi did not appear on the pc
This command updates the bios. I am not sure when I did it worked for me without issue.
I am.still geting error libcamera hello command not found
Hi, I did a fresh installation of the 64 bit OS and followed all of your steps.
I'm using PI3 Model B+.
It did not work for me because after typing sudo libcamera-hello, it didnt show the camera feed.
the terminal says: "libEGL warning: failed to authenticate" and gives me some INFO and WARN but also the ERROR: "Camera sensor does not support test pattern modes"
last line is "what(): failed to import fd 20"
The camera is working on 32 bit but I need 64 bit OS compatibility.
Can you help me with the issue?
Thank you
Did you try the old commands that i mentioned in the video and see if it works. Verify if your config file is accordingly modified for it to work. Also please share the camera module version so that i help you better.
@@AstroShootingStars thanks for the answer, I tried the raspistill command but it doesnt exist. The camera is the raspberry pi high quality camera V1.0 2018.
On Raspberry Pi 3 and earlier devices running 64bit os you need to re-enable Glamor in order to make the X-Windows hardware accelerated preview window work. To do this enter sudo raspi-config at a terminal window and then choose Advanced Options, Glamor and Yes. Finally quit raspi-config and let it reboot your Raspberry Pi.I hope this helps
sudo: libcamera-hello: command not found it it not work for me
I updated firmware successfully. Every time I enable legacy camera I can't access the pi4 through the desktop anymore. I have to then ssh into the pi4 and disable the legacy camera and reboot for it to work fine. Why is this ? Any help appreciated. I'm running Raspi Bullseye.
i dont know what remote desktop app you are using may be this is conflicting with that. you can use XRDP for remote desktop and it works for me with legacy camera here is my tutorial on XRDP
How To Setup Remote Desktop Connection To Raspberry Pi 4 on Ubuntu Using XRDP From Windows | RDC
czcams.com/video/55sUIufYofE/video.html
How to Install Raspberry PI OS 64Bit on Rasperry Pi 4 8 GB with Remote Desktop connection using XRDP
czcams.com/video/HMbDGH0X27k/video.html
I hope this helps. Please stay tuned to my channel for my future videos.
thanks for your detailed explanation.
after typing sudo cameralib-hello, I get the following error: "failed to import fd 19"
please share your ideas for solving this
Are you sure you are using the correct command as you wrote cameralib instead of libcamera
@@AstroShootingStars yes same thing,I wrote correct command
Hi, I have this problem):
Terminate called after throwing an instance of 'std::runtime_error'
Failed to import fd 19
Abortado
i also face same ... any sol?
great
I am glad you liked it. Please stay tuned to my channel for my future videos
In my project it is showing command not found
can this work on opencv2?
It worked ! But why is my image is pink colored? Is it somekind of filter maybe you could do a tutorial on how to get a normal view? Thank you very much
Hi if you used the command i shared in my tutorial and still get the pink view this could be due to damaged camera or faulty camera. As the command used to display image from camera is normal and should display image normally. Try replacing and using another camera. I hope this helps. Please stay tuned to my channel for my future videos
That's funny! 🤣 When you enabled not recommended Legacy Camera support in raspi-config, you actually added "start_x=1" string into /boot/config.txt. Then you edited /boot/config.txt with nano to comment out that string and add "camera_auto_detect=1" which was there by default before you enabled legacy support! What's the point of that?! In other words, you enabled Legacy support via raspi-config and then disabled it by editing config.txt. And you don't have to run libcamera commands with sudo 😅 And, of course, you don't need to enable all the interfaces to make the camera work.
Hello, is it normal that the legacy camera activation option doesn't appear in the interface menu ?
yes it is normal now for newer os the option is by default enabled how will you can still modify the config file. I hope this helped. please stay tuned to my channel for my future videos.
when i enable the legacy camera in config, i rebooted and my vnc will say cannot currently show the dekstop. i am sure this is because of that settings because after i disable it, i can use my vnc as usual. can anybody help?
please use XRDP for the remote connection I already have a video on my channel
czcams.com/video/HMbDGH0X27k/video.html
I hope this helps. Please stay tuned to my channel for my future videos
preview unavailable...it shows Error:device timeout detected, attempting a restart!!!
Did ur problem solved???
I too got same error
Doesn't work for me. I am using a raspberry pi 3B+. Would that matter?
I guess not as mostly the camera and commands are Operating system based not dependent on hardware. Its only way to connect your camera or enabling the camera might be different. In addition to command line enabling camera interface check in your settings menu for interfaces if you have camera enabled if you have that option avialable. If you still have issue please describe your problem may be I could help. Please stay tuned to my channel for my future videos
the warning looks sketchy. it works without an update. why do i need it?
You can proceed without update, its just upgrades the firmware not its not mandatory step. I hope this helps. Please stay tuned to my channel for my future videos.
I have tried to enable the legacy camera using VNC viewer but the issue is that after enabling it and rebooting my pi the vnc doesn't show the desktop please help me with this ....
This should not be issue due to camera enabling , you need to re install the VNC as some thing with VNC might have got wrong or try using XRDP for remote desktop connection . I have done the detailed tutorial on how to do remote desktop using XRDP please find the link below
czcams.com/video/HMbDGH0X27k/video.html
I hope this helps. Please stay tuned to my channel for my future videos.
@@AstroShootingStars i have tried and reinstall the vnc but still the same issue
Did you try xrdp
@@AstroShootingStars i have tried even that and i dont know why it takes lot of time to initialise in remote desktop connection after enabling the legacy camera
Did you try disabling the legacy camera again and check if there is improvent ?
Hi, I have no button for enable camera module in raspi-config. How can i fix that?
not sure which raspberry pi are you using also check if you upgrading the bios fixes your issue. I hope this helped please stay tuned to my channel for my future videos
If you’re running on the newest version of rasbian OS (Bookworm)then the camera will automatically be enabled, the option to enable it won’t show in the raspi-config interface menu like it does in all other previous OS versions. All you have to do is run the command libcamera-hello or libcamera-still and it should work. If not, editing the config.txt file will most likely be the solution (excluding hardware issues).
Hello @bndwthbeats3636 and @AstroShootingStars , I am using the Raspberry pi 4 with latest 64 bit OS (Bookworm) and same camera which is used in the video, and libcamera-hello works fine for me, but am getting error of not getting frames while capturing video using opencv in python. also camera is not found in the online webcam test or in googe meet video call , could anyone help on this part?
hi how to install camera on raspberry pi 4 model b window 10
Thank you for the comments. I will try and make that video as soon as possible. Please stay tuned to my channel for my future videos
Thank you for the tutorial, but now i have another problem.
I cannot call my camera from the "import sys" from python
thank you for your comments , with lib cam library you can use PIcamera2 python library to be able to access the camera in your projects here are the links for your reference
www.raspberrypi.com/news/a-preview-release-of-the-picamera2-library/
github.com/raspberrypi/picamera2
I hope this helps. Please stay tuned to my channel for my future Videos.
Hello Sir,As soon as I type the command libcamera-still .I am getting a error message that " no cameras available".
Sir ,What should I do now Could you please help me sir?
there could be several reasons. legacy camera mot enabled , faulty cable, faulty camera. try disabling legacy camera. I hope this helps. Please stay tuned to my channel for my future videos
I follow each steps
Im using raspberry pi 3 and rasberry os
Im getting error "camera sensor does not support test pattern mode" and
Failed to import fd19
Plz help sir
what camera are you using ? also the process I explained is for rpi4
Hey there. I cannot find the Camera option inside Interface
same here i can't find the camera option in interface any solution to it yet?
@@nightdreamer7071 ya. i ditched the piCam and got a usb webcam.
got the 64 bit bullseye os. full version. bullseye has the camera option in the config.
installed fswebcam in the terminal. and the cam was working.
There is no camera tab on my interface what do I do then
in new version of OS it is by default turned on. if you want the option install older version of OS. I hope this helps. Please stay tuned to my channel for my future videos.
Error: no cameras available, please can you help me sir?
Bro libcamera -app screen is completely black
Mine locked me out as soon as it restarted after the reboot. Wont take my password just asks again over and over. It doesn't say wrong password just asks for it again.
its possible that you added space in the pwd by mistake. Try repeating the process again carefully. Please stay tuned to my channel for my future videos
I have followed every step but error showing no camera available. Please help 🙏
It works only for rspi 4. If its the case only thing it could be the cables are connected incorrectly or you have a bad camera. I hope this helps please stay tuned to my channel for my future videos
I fixed it, but it continues with the error " libEGL warning: DRI2: failed to authenticate
Made X/EGL preview window". Can you help me?. Already enable legacy camera. I use Noir V2 camera
Did you install any thirdparty application or library before this. These errors could be issue due to previous installation. If you are not able to remove previous applications, try fresh installation of OS and then follow the instructions from my video also i have another video on installation of latest PI OS. I hope this helps. Please stay tuned to my channel for my future videos
legacy camera option doesnt appear to me what is the solution?
its turned on by default in new OS. however you can still modify the config file. I hope this helps. please stay tuned to my channel for my future videos
For me my camera isnt recognized at all, even though i can get a preview of the camera for 5 seconds before it closes@AstroShootingStars
Error:device timeout detected, attempting a restart!!!
Have you solved the problem yet?
Cannot find camera option in configuration 😢
In new version you don't need to enable camera you can just start working without enabling just make sure all the connection are proper
Legacy camera is not showing
the camera does not turn on even though the camera is installed correctly
Which version of raspberry pi are you using. The camera has to be enabled in firmware and process I showed works only for rspi4. I hope this helps. Please stay tuned to my channel for my future videos
its showing me the eroor that failed to import
terminatevcalled after throwing aninstance of 'std::runtime_error'
please help me with that as soon as possible
my project in not moving forward because of this
how to capture a video
Te amo
gracias amigo espero te gusta mi videos
Can anyone share this raspberry pi os link
this is the link of the video for installing rspi os
How to Install Raspberry PI OS 64Bit on Rasperry Pi 4 8 GB with Remote Desktop connection using XRDP
czcams.com/video/HMbDGH0X27k/video.html
i hope this helps. Please stay tuned to my channel for my future videos
Useless when other issues are ignored and liking and replying all positive comments.. Need help dude here with people having the same issue where pi 5 doesn't show camera it just opens and crashes
7:53 video starts
Can't we like more than one?
do you want to connect more than one camera ?
support
pi is gonna open due to update
I do not understand the question can you please elaborate
I can't install raspistill
Which version of rspi you have ?
@@AstroShootingStars raspberry pi 4 B , 64bit recommended software
-it show like unable to locate package (for both raspistill and libcamera)
Rapstill will not work you need to install libcam first follow the commands and install the library first
@@AstroShootingStars now the new problem arises bro when it captures image it completely black 😭😭😭😭😭😭😭😭 .
even installed ubantu software today and tried same problem (completely black image) but I can capture image in cheese it works but when I run terminal comment it's saves picture in fully black.
@@AstroShootingStars is there anyway I can contact you further to clear my dout's any media (instagram,linkedin,telegram, Whatsapp, twitter) and - thank your for your replys bro 🤝
I have an aach64 version (64bitOS) nd a pi camera. When i install picamera in the terminal it says successfully installed but this error pops up:
Traceback (most recent call last):
File "/home/navimkv2000/Desktop/tensorflowRasp/models/research/object_detection/forestsurvayfinal2.py", line 5, in
from picamera.array import PiRGBArray
File "/usr/local/lib/python3.9/dist-packages/picamera/__init__.py", line 72, in
from picamera.exc import (
File "/usr/local/lib/python3.9/dist-packages/picamera/exc.py", line 41, in
import picamera.mmal as mmal
File "/usr/local/lib/python3.9/dist-packages/picamera/mmal.py", line 49, in
_lib = ct.CDLL('libmmal.so')
File "/usr/lib/python3.9/ctypes/__init__.py", line 374, in __init__
self._handle = _dlopen(self._name, mode)
OSError: libmmal.so: cannot open shared object file: No such file or directory
Please help ASAP
Can you please advise which version of RSPi you are using and also the name of OS that you have used along with Camera Version that you are using
error: XDG_RUNTIME_DIR not set in the environment.
Made X/EGL preview window
[0:11:04.633273277] [3038] INFO Camera camera_manager.cpp:299 libcamera v0.0.3+40-9b360a66
ERROR: *** no cameras available *
HELP!...
I have this error:
Preview window unavailable
[0:01:25.656603116] [1826] INFO Camera camera_manager.cpp:299 libcamera v0.0.2+47-0684c373
[0:01:25.693398500] [1827] WARN RPI raspberrypi.cpp:1306 Mismatch between Unicam and CamHelper for embedded data usage!
[0:01:25.694718011] [1827] INFO RPI raspberrypi.cpp:1423 Registered camera /base/soc/i2c0mux/i2c@1/imx219@10 to Unicam device /dev/media2 and ISP device /dev/media0
[0:01:25.695718254] [1826] INFO Camera camera.cpp:1026 configuring streams: (0) 1640x1232-YUV420
[0:01:25.696314011] [1827] INFO RPI raspberrypi.cpp:803 Sensor: /base/soc/i2c0mux/i2c@1/imx219@10 - Selected sensor format: 1640x1232-SBGGR10_1X10 - Selected unicam format: 1640x1232-pBAA
same here
hey i have rasberry pi 3 and i did the same steps
and i got an error pls help me on an urgent note
libEGL warning: DRI2: failed to authenticate
Made X/EGL preview window
[0:01:05.062402003] [1569] INFO Camera camera_manager.cpp:293 libcamera v0.0.0+3700-f30ad033
ERROR: *** no cameras available ***
i did not get camera_auto_detected written so i wrote it by myself
any problems there?
Under /boot/config.txt ensure either dtoverlay=vc4-fkms-v3d or dtoverlay = vc4-kms-v3d is currently active. I hope this helps. Please stay tuned to my channel for my future videos
@@AstroShootingStars hi, thank you for making this video. I also got the same error. I followed your instructions.
At the initial the camera responded but now it shows that no camera is available. what shall i do
🥲😭
Assuming your components are still good i would say install everything fresh to eliminate other factors. if not try changing camera module. I hope this helped. Please stay tuned to my channel for my future videos
After rebooting the rpi it wont turn on. how can I fix this ?
boot loader is normally a separate flash and should not impact booting additionally check if the boot indicator light and power lights are turning on if yes then you just need to reflash the OS. if not your rpi is faulty. I hope this helps. please stay tuned to my channel for my future videos