fence post removal made easy
Vložit
- čas přidán 20. 05. 2022
- How to remove fence posts. easy way to remove fence posts. Remove fence posts by yourself.
Black and Decker torque wrench review. #construction #diy #carpenter #woodworking #jesus #howto #blackanddecker #fence #fencepost #blonde - Jak na to + styl
Funny that this video popped up (without a search), I just so happen to have to pull some posts here soon. The internet now even knows what we're thinking. Good video.
That's awesome, yep big brother internet knows almost as much as God, lol!
Same with me. No earthly reason this should pop up in my feed except I noticed this morning that my 20' garden fence is on its last legs...Scary!
Thanks Rev. It was simple and great; but your words of faith was powerful.Thanks a million. Charlie from Namibia/Africa.
Your welcome! That is the main reason for my videos,Thanks for watching!
what a great tip from a young man! it will come in handy for my grand kids
Thank you!
This takes too long and too much prep work per post. Better just to use a chain and high lift jack, imo. Imagine having to drill holes for 14 posts and sit there on each post pumping that hydraulic lift 100 times to lift it HALF WAY up. :(
Not everyone has one of those
There are 100 more methods that are way better than that to pull a fence post out.
@reverendcolonel395 Hydraulic jack can be bought for twenty five dollars. A high lift jack can probably be bought for seventy five dollars. The time you save with the high left jack and a chain I think would well pay for the extra fifty dollars or even seventy five dollars if you want to buy the chain if you don't have one. But if it's a matter of not being able to afford an extra Seventy five dollars then go with a hydraulic lift Whatever works for each person is what they should do But I plan to put a new fence up and I know. Definitely i'm not gonna be using these hydraulic lifts that I already have purchased for twenty five dollars each. Way too time consuming to lift twelve posts out of the ground With that method. Also using a chain instead. We'll pull the post roughly straight up instead of having it go backwards because you're pushing up on a jig on one side of the post.
Faith of a mustard seed. Much greater message in the message. Excellent
Thanks Jack for your encouraging affirmation. Please subscribe and share if you have'nt already; so that we might reach the masses with God's word. God bless and thanks for watching!
Usually a length of chain wrapped around the post so that tension on it will bind it tighter around the post is sufficient. Works great on wood posts, and I've also used it a few times on steel posts and it worked okay but is more tricky to get it to bind.
Oh and I use a hi-lift jack. A lot more vertical range than a bottle jack and it has a convenient hook to catch the chain.
If you have a heavy chain that works too.
Hi, with respect, what are you calling a "hi-lift" jack? Is that the same as the "handyman"? Just curious. Thanks. Roger
@@rkf2746 according to their website: Hi-Lift Jack company produces two types of mechanical jacks, often referred to as Handyman Jacks, farm jacks, or trail jacks.
@@rkf2746 Google it
@@feesimple388 Yeah, could be. My son in law calls it that.
Impressive. Just the sort of work arounds that spring from a creative mind. Thank you for this.
Thank you very much!
i use a scissers jack and my 1/2 inch impact with a short piece of chain
I'm not a believer, but I like your message at the end as well. I like the tool you created for removing the posts. This prevents one from having to buy a high-lift jack and a chain, which is what I had to do. Actually I already had the jack, but a bottle jack and some boards is less expensive and you can get a very powerful bottle jack for not a lot of money.
Exactly! Thank you and thanks for watching. Hopefully I have oyher videos you will find helpful.
Unfortunately. the post is usually rotten at the soil level, breaks off and the partially rotten stump is in the concrete well. Then the fan starts.
Occasionally that can happen. Often that can be avoided if you first remove soil that's on top of the concrete. But as in all construction things don't always go in your favor. My system works most of the time. But sometimes you have to break out the chipping hammer. I have a video coming out on that soon.
One thing at a time
@@reverendcolonel3953 wassup
Thanks for sharing your idea on post removal. I'll give it a try
Awesome, I hope it goes well for you. Thanks for watching!
Well done, I did this a while ago with sleeper posts.
Thank you and thanks for watching!
You could avoid the extra work of making a ground jig by using a cinder block, or some other bricks. Great job!!
Thanks for watching! I thought about blocks but thought wood was easier and lighter to move from post to post.
Good idea and worked great. If you don't have bottle jack a farm wagon jack or a car jack from older car will also work. Thanks.
Awesome! Glad it worked for you. Thanks for watching!
Perfect for a job I have. Thanks for posting👍
Hope it helps.
@@reverendcolonel395 I used this method today for 8 fence posts that had lots of concrete. It was fantastic. All out in no time. Thanks again!
Awesome upload step by step instructions. Will try ur technique when needed. Bonus enjoyed application from the Bible. Kudos how well it applies. Anticipating ur next vid. Peace
Thank you very much, reaching people with the Gospel in a unique way is my main goal, and helping people to brainstorm and try to fix things secondly.
when i worked for the power company we had a hydraulic pole butt puller that was like a large version of the bottle jack. it ran off the truck hydraulics. very good idea for the home owner or on the farm. thnx.
Thank you, and thanks for watching.
Wow, brilliant!! Thank you!
Thank you, and thanks for watching!
Thanks I'm going to try this out in the morning
Awesome! Hope it works well for you.
In a rural area, along a county drainage ditch (deep and wide enough to drive a 4 wheeler in and it wouldn’t be seen by someone on the road) are a long row of steel fence posts. Densely wooded, getting a tractor or other vehicle in there wasn’t practical. Based on your idea, here’s what we did; 1 inch black pipe, one foot long threaded on one end only. Took a 90 degree elbow and screwed it to the threaded pipe. Un-threaded end was placed on top of the bottle jack. Wrapped a chain around the post and the elbow, then bolted the chain to itself - tight to the post. Placed a rock under the jack and pumped away. Yeah, a pain in the behind, took a few weeks or better (working a little at a time) without too much effort. Slow and steady got the job done (once we had a plan). Still wondering how YT knew I’d been thinking how to get them posts outta there… 🙂
Sounds awesome, glad my video inspired you! Thanks for watching!
Just trying to picture your set up.The threaded screw part of the jack goes inside the one foot pipe?Don’t you lose the advantage of the screw extension because it’s inside the pipe?Or did you put a bolt through the pipe for the foot of the jack to butt up against?What have I missed?Cheers from NZ.👍
@@patmiddleton3947The steel fence posts have small 'nubs' about an inch and a half apart, for the entire length of the fence post. [A] We secured a 1 inch diameter pipe about a foot long, in the vertical position, to the post with a chain. Be sure to wrap the chain around the elbow. [B] To assure the chain would not slide off the pipe, we screwed a 90 degree elbow to the top of the pipe. [C] Then we placed the jack under the pipe and pumped up about 8 inches, lowered the jack, undid the chain and repeated the process. The 8 ton bottle jack I used, has a diameter larger than the 1 inch diameter pipe and will not fit inside the 1 inch diameter pipe. The bottle jack lifts the pipe, which lifts the chain, which lifts the post. Wrap the chain around the elbow so the chain won't slip off of the pipe. Face the elbow away from the post. 🙂
Because you had been talking about it. Google violates your 4th. Admendment,in other words they spy on you even when your phone is off. That's how!!!
Great piece of know-how!
Thanks! Thanks for watching!
In Houston all the posts will eventually rot and break off at the concrete due to the 3" layer of grass cuttings.
And the humidity there! Y'all are much more humid than we are in Dallas County! Thanks for watching!
AMEN, Rev! This video is just in time for my project, which is EXACTLY like yours. God is Good! Thank you.
Glad I could help, and yes God is always good! Thanks for watching!
Great trick. Thanks for sharing it.
Glad you liked it! Keep watching more to come soon.
That is a good day when they come out. Now what do you do if the post breaks below the concrete grade.
I am looking for a way to pulverize wet 6x6 cedar below grade where it broke off. I Put a d-ring and 10"x 1/2" lags in and the farm jack just pulled the lags out. Ideas? How do I clear that hole??
Auger a hole next to it about 1/2 way down. Get out the chipping hammer and break the concrete. Then back fill and re-clear the hole.
Great idea. When I removed my 4x4 concreted posts I just dug out beside the concrete, pulled the post toward my dug out spot and pulled post out. Then knocked off concrete. Now I have my posts again
Awesome! Thanks for watching!
Hi lift jack like the ones Jeep guys carry aka farmers jacks work extremely well for pulling posts
That would work nicely, if you have one. Thanks for watching!
Pretty good method. First dyi video I've seen where it was videoed from start to finish too close!!🙂
Thank you for the compliment! Thank you for watching!
Old school bumper jacks work too, if you can find one.
Very true! I used to have one of those but it has been years. Cars haven't had bumpers that could handle jacks in a long time. Thanks for watching!
Helpful video; I love good old American ingenuity. You all know more about this stuff than I do, but instead of constructing a wooden bridge, could you just lay a couple of 2X4s (or a 4X4) across a pair of bricks or cinderblocks? Dunno if I am trying to be smart or just lazy.
Thank you! Yeah that wound work too. But it may be my cumbersome to lug around if you have a lot of posts to do. Thanks for watching!
Great idea, thank you
You are so welcome! Thanks for watching, new videos coming soon.
Very good.. I like the words of faith.. so true... Thanks for sharing this.. Have a good day..
Thank you! You too! You have a nice channel also!
I just use a chain and my 3point hitch. Concerted post dig a depression around them pour in water and let it soak for awhile, comes right out.
Sounds like a good process, not sure if it would work in black texas clay like I have hear, sometimes water just turns it into glue.
Not many people take out a perfectly good post.. most need to be replaced because they are rotted out so not sure if this would work well.. but its an idea
True, but I have a lot of clients changing from wood to steel!
Thank you 🙏
Thank you for watching!
worth a shot ... thanks
No problem, Thanks for watching!
God bless u...souls clean and boots dirty. Never hesard that one b4. Thanks.
Thank you, keep watching I've got more videos to come.
If you really want to use your Black + Decker 20 tools for long periods of time you can get larger batteries. I have two 6 Ah batteries I use on my weed eater and pole saw. I get tired before the battery does.
Thanks for the tip, I've heard rumor of larger batteries. I just purchase the Matrix drill driver, I will be doing a review video on it soon.
How would you do metal fence posts?
Metal posts can use the same method. Harder to drill through though. Another method is to auger beside the post but then you have to refill and re auger the hole. If you have a lot of them to do if you are able to lay out your posts differently you can cut them off just below ground level and auger fresh new holes! Thanks for watching!
Damn! That's too much like work. I have an old tri-pod screw jack. I open it up and put it snug against the post. I put a piece of 2×6 under the two spreader legs. Wrap a chain around the post and hook it to the jack. Once that's done I just crank on it to pull the wood out.
Sounds like a viable method, if you have a tripod jack.
Good job and video
Thank you and thanks for watching.
Use a farm jack sitting on ground and straight under top 2x4s, when bolted on. No need for a platform.
Thanks! Thanks for watching!
What if you have round metal post?
Still works, just drill through the posts for bolts. Thanks for watching! More to come soon.
Are you replacing the post in the same spot? You can see where I'm going with this.
Yes, you can. That's why I bridge over the concrete so it will come out with the post. Thanks for watching! More to come soon.
A picture is worth a thousand words 🤔
Thank you, and thanks for watching!
Obviously a lot easier if you have a tractor handy. If the post is broke of and there is cement in the ground then need a blade. But I realize that not everyone has that handy.
Wish I had a tractor...
Great idea
Thank you!
Bang the post a few time, wiggle it a bit, place 3/4" plywood under the feet and start cranking🙏🏻
Thanks for watching.
How 'bout a video for how to get the concrete out? Thx.
I understand, sometimes posts will slip right out of their concrete, I will have to do a video next time this happens to me, thanks for the idea. Thanks! And thank you for watching!
Good job 👍
Thanks for watching! More to come soon.
Very clever.
Thanks
Love it - work smart not hard
Absolutely! Thanks for watching!
Don’t work hard, work smart!
Thanks! Thanks for watching!
I wonder if my engine hoist will do this!
That's thinking out of the box!
did the same thing with scissor jack
Thanks! Thanks for watching!
Will use this on metal poles that were used as clothes line at brothers house
Awesome! thanks for watching
I use my Jeep off road jack that is 48 inches high and wrap a slip chain around the remaining broken post like a choker to pull it out...
I've seen that before. I don't have a jack like that but that sounds like a good idea. Thanks for watching.
That’s exactly how I do it as well. HiLift’s are great for a multitude of uses.
OMG…I’ve been doing this type of work 4 ever….by the time all this is done, you could have taken a round shovel Doug, 8 inches around 5 post, and all the post will literally fall down 😂
I get it, more than one way to skin a cat. Personally I don't like digging. Also if you have several to do, the jack is faster. Down side to digging is if you need to reuse the same post location you have to use twice as much concrete to stabilize the new post because the ground around it is now unstable.
That's awesome
Thank you, and thanks for watching.
I use my Kubota front end loader.
OK that's cheating, LOL! If I had one I would too!
Lag bolts and hydraulic Jack will work ok if you have 13 years to work on it.
The hydraulic Jack has too short of a stroke.
Chain it up with a hi- lift
sure if you have one but most people don't have a hi-lift.
@@reverendcolonel395 I tried the pump jack and spent hours re-blocking to get the distance. Went on marketplace and bought a HI-lift for 40 bucks. If you only have one or two posts, its not worth the purchase. Thanks for posting!
That's nice work but the cement post is still there and that can be a pain to remove...
sometimes they slip out of the concrete but most pull out concrete and all. But when they don't you have three choices. 1. leave the concrete and relocate the new one. 2. dig a hole next to it to make room to extract it. 3. get out the chipping hammer. Thanks for watching!
Nice
Thanks
Cut it to knee height. Then drive a wedge into it. The split in the post will disturb the soil enough to break the post and yank it out.
There can't be any anchor (concrete)on the post in order for this to work.
Interesting... my method works on concrete unless the post in the concrete. is loose in the concrete, in which case it will still yank the post but you will need to bust and excavate the concrete
So just how are you supposed to just yank it out if there’s cement in the hole. You’re making an effortless fix that he showed us a pain in the ass.
Bridge was built too well. I would nail two 2x4s together and rest the joist on cinder blocks on both end
That would work, but my way is more portable and I've used the same one for about 3 years.
That’s good if the concrete comes out with the post . If not you really haven’t done anything .
That's a risk with wood posts for sure. But that's like most thing in remodeling, same thing doesn't always produce the same results. However I found this works in most cases. Thanks for watching!
Farm jack and chain is faster and easy peasy!
Awesome!
spent half the day plus whatever the mount of $ , could have hire a contractor to do the lob !
Awesome! Thanks for watching.
Great Video just need to put a lump of wood on the ground
Thank you, and thanks for watching!
Concrete could not come up if using a lump of wood. 🙂
Here's an idea for using the come-along. I've pulled out posts anchored with concrete using this method.
You just need a folding step ladder, a couple lengths of chain and the come-along.
Set up the ladder over the post and hang the come-along from the top. (If you have a two-sided ladder, you can set a length of 2x4 or 4x4 across the top steps and hang the come-along from that, to distribute the load and have less chance of breaking the ladder.)
drop a couple loops of chain around the post and bring the ends back up to the extended come-along.
start cranking, and the post should pull right out.
If you need to, just re-extend the come-along and let the chain drop further down on the post, then start cranking again.
This has worked great for me. Maybe someone else will get some success from this method too.
Great idea! I've seen it done with a car jack simularly but your idea sounds better than that. I might have to try it. Thanks for watching.
gotta watch the weight rating on a ladder. Most are only good for 250 - 350 pounds. They will take more, but you might also need a new ladder if you screw up.
@@rupe53 Good Point. Size and weight do become a big factor, Even with the board spreading the weight across the top rungs.
You could also make a tripod with 2x4's. That would, if nothing else, mean that you're not risking a good ladder. I'm just not sure off the top of my head how to connect the 2x4's at the top so you can hang the come-along from it.
@@kevbu4 ... the biggest drawback is most step ladders only have modest braces on the back, which are not meant for weight. One could engineer something, but a wonky DIY build is likely to have wonky results as well.... mostly because people build this stuff out of scraps, they have laying around. IOW, it's never the same way twice in a row. BTW, you could build a tripod with 2x4 and connect all three together with a piece of threaded rod. Use 3/8" rod but drill the holes to maybe 3/4" and use large flat washers to tie things together. if you leave an inch of space between the boards and use the extra wobble (larger holes) you can spread the legs several feet apart. Just hook your chain in the center BEFORE you spread the legs, which will cause the top ends of the boards to touch each other. (adds stability) You can double nut the rods to keep the parts from getting lost.
@@rupe53 The ladder I used was a two sided ladder(you could climb up either side)
But I know what you mean by only modest braces on the back. I would not use the back as support on that kind of ladder. Are two sided ladders not that common?
Also, do you think a long 3/8ths inch bolt would work as well as the threaded rod? or are there common differences in tensile/shear strength?
The problem I have is replacing broken rotten posts not these almost new ones
In those cases either cut off flush and forget it or dig it out and use a chipping hammer to break the concrete.
True
Thanks for watching!
😎
How to make a simple job into a huge ordeal.....all you need is a bottle jack and sturdy piece of chain!
Have you ever heard of a farm jack before? Look it up.
Yes I have. Not everyone has one of those so it is good to have alternate ways with things most people have around the house. Thanks for watching.
Burglars use the jack to bend your iron safety bars.
Don't think I have ever seen that done! Thanks for watching!
Batteries are cheap? Now they're giving away the tool if you buy the battery!
clever
Thank you and, Thanks for watching!
For a single post maybe.
Actually I have taken out a ton of posts with this gig, three years later the jig still works. Thanks for watching.
That doesn't remove the concrete! & if you're replacing a fence, you'll need to get the concrete out also. Just cut the post off & get a 4' - 5', 4x4 then wrap a 10' chain around the top of the concrete & tie it to the trailer hitch of truck. Then put the 4x4 about 1/2 way between the concrete & the truck @ a 45° angle and slowly tension the chain. Once the 4x4 is set onto the ground, hit the gas & it pops right out. It may take a couple of tries, but it works well.
Unfortunately you can't always access posts with a truck. Most of the posts I remove this way , the concrete comes out with the post.
Too complicated. I've pulled a lot of cemented posts QUICKLY by simply throwing a chain around the post and using a farm jack to jack it out of the ground. The method shown works, but takes a long time.
A farm jack works great if you have one, but most people I know do not. In which case the bottle jack is something most people have or can get easily. Thanks for watching.
You are right. When I first used my farm jack on a project, it was one of those things I bought off Amazon some time back, just cause I might have a use for it someday. lol.@@reverendcolonel395
Add a little water 🦆
Depending on your soil type adding water may make the process simpler. Here with black Texas clay it sometimes makes it worse, depending on the time of year. Thanks for watching!
Why not just dig it out?
You can but then you've got a lot bigger hole and much more labor
You get a@@reverendcolonel395
You get an auger and dig right next to it. . comes out really easy.
I just back up my car to it and put a chain on it and rip right out of the ground in two minutes and dont waist a bunch of lumber doing it.
Well that's one way to do it. But most of the time terrain, location and access will prohibit that method. Plus I don't think may clients would see it as very professional. Thanks for watching!
Chain and truck
If you don't break it that might work
... 7+ minutes, Could have been
In that case, take your auger and drill a hole next to it and then use a rotary hammer to break the concrete into managable peices. Good question. Thanks for watching! More to come soon.
Way too much work. Screw a 2x4 to the post . Put heavy block or plywood under the jack. Slick.
I've tried screws, they just sheared off. That is why I use bolts. Thanks for watching.
i found alot easier way to remove it without all the time and construction.
Hmmm... How?
That's too much work. Just use some big nails to put 2x4 scraps together and jack it off with a farm jack.
In my experience nails won't hold, and most people don't have a farm jack
@@reverendcolonel395 Thank you. If several big nails don't hold I break out a couple of old bolts I keep for that.
Too much effort.
Great Idea !
Thanks! And thank you for watching!