Hey i want to try this but when i try to connect the Goggles with my Game its says "Plaftform 'dji_usb' not found, what's the problem? Can you help me to fix that?
can you send the file again please, I keep downloading moonlight, and every time I try to open it, it says there is a problem with the button.ocx file and doesn't open. When I click in the link provided in the description it says that the page isn't available
Dude, i wish i would of found this last night! Well done! I was able to get mine to work thankfully but i did is slightly different/didnt use windows powershell?
@@patrixfpv to be honest i didnt do any commands or anything. I rooted and installed wtfos, moonlight and fan control on the goggles. I re-installed geforce experience and added sims by clicking add and clicking the folder on each one on my desktop. I then downloaded and ran moonlight-gui, that prompted to enter the pin and then i clicked stream and connected my goggles and it all works!
I have little problem, when im trying to pair googles there is no prompt from NVidia Experience to enter pin, nothing is happening. Googles have moonlight on, gamestream is on.
One question: why, when I put the command (./moonlight stream -app Liftoff -platform dji_usb -bitrate 60000), the powershell says: ``unable to claim interface: (-12) Operation not supported or unimplemented on this platform´´. What should I do? Thanks, and great job!
For now, can you try net mode? Start moonlight directly from the goggles then in moonlight pc use "-platform dji_net" instead of usb. I'll dig more in this issue.
@gabrielruiz7941 Try this, close all apps, power up your goggles and wait for it too boot completely, plug it in your computer and run Zadig(maybe you don't have it, maybe you do), click options and tick "list all devices". Then from the device selection drop down menu, choose bulk interface. Does it show WinUSB?
If you don't have an nvidia graphics card then you need to install sunshine in your pc. You will use it to stream programs from your desktop for moonlight to receive.
Hi! First of all, thankyou very much for your hard hard work! When I try to use usb mode, an error appears: root@pigeon_wm150_gls:/ # exec dji-moonlight-shim --usb WARNING: linker: ./dji-moonlight-shim: unsupported flags DT_FLAGS_1=0x8000001 You know what that is? Best Regards
Hi! If I remember correctly, I see that error too but it doesn't affect the stream. Also, now, there is a GUI version and is much easier! Check out the pinned comment in this video
@@patrixfpv Thanks! I no have this issue when I click stream: unable to claim interface: (-12) Operation not supported or unimplemented on this platform No video is streamed on the goggles, I use Windows 10
Try this, close all apps, power up your goggles and wait for it too boot completely, plug it in your computer and run Zadig(maybe you don't have it, maybe you do), click options and tick "list all devices". Then from the device selection drop down menu, choose bulk interface. Does it show WinUSB?
![☀ Глубокая настройка OSD на цифре. От А до Я. MSP+Displayport. [DJI FPV/Walksnail OSD Tutorial]](http://i.ytimg.com/vi/m5KcrF-uGRE/mqdefault.jpg)
Hey i want to try this but when i try to connect the Goggles with my Game its says "Plaftform 'dji_usb' not found, what's the problem?
Can you help me to fix that?
can you send the file again please, I keep downloading moonlight, and every time I try to open it, it says there is a problem with the button.ocx file and doesn't open. When I click in the link provided in the description it says that the page isn't available
Great job mate!!!!
Try it!
hmmm this on my racing sim hehehe
Yeah!
Dude, i wish i would of found this last night! Well done! I was able to get mine to work thankfully but i did is slightly different/didnt use windows powershell?
Hi! You used command promt, correct? You are the first one to say that it worked for you. I'm glad it did.
@@patrixfpv to be honest i didnt do any commands or anything. I rooted and installed wtfos, moonlight and fan control on the goggles. I re-installed geforce experience and added sims by clicking add and clicking the folder on each one on my desktop. I then downloaded and ran moonlight-gui, that prompted to enter the pin and then i clicked stream and connected my goggles and it all works!
THX! Is it a v1 or v2 goggles?
V1 Goggles
Good news! The latest version now has a GUI! Here's an updated video
🔗czcams.com/video/A2wXbAJXQNY/video.html
Too bad the gui is Windows only. Would be nice to stream from a steam deck to the goggles.
I have little problem, when im trying to pair googles there is no prompt from NVidia Experience to enter pin, nothing is happening. Googles have moonlight on, gamestream is on.
Can you put here what command you entered?
I've coppied command from video description, there is pin number listed in powershell but there is no prompt from Nvidia
Can you paste here the text that appear after you have typed moonlight pair.
@@patrixfpv i have found that sunshine service must be uninstalled, now rndis is working properly but i cant stream VIA USB
will this work for goggles 2?
This will work with rooted goggles only. Still not possible with goggles 2.
One question:
why, when I put the command (./moonlight stream -app Liftoff -platform dji_usb -bitrate 60000), the powershell says: ``unable to claim interface: (-12) Operation not supported or unimplemented on this platform´´. What should I do? Thanks, and great job!
Hi! We should actually thank the devs 🙂🙂. Btw, what computer are you using?
@@patrixfpv I'm using a ROG strix gaming laptop with a Ryzen 7 4800H and a Nvidia Gforce RTX 3050
For now, can you try net mode? Start moonlight directly from the goggles then in moonlight pc use "-platform dji_net" instead of usb. I'll dig more in this issue.
@gabrielruiz7941 Try this, close all apps, power up your goggles and wait for it too boot completely, plug it in your computer and run Zadig(maybe you don't have it, maybe you do), click options and tick "list all devices". Then from the device selection drop down menu, choose bulk interface. Does it show WinUSB?
@@patrixfpv Yes it does! Now, what I should do?
The "pair" button doesnt work :(
Could you try right click on the pair and select refresh?
try running as root error
ofc I run powershell as admin......
``unable to open device, or device not found.
try running as root (with sudo)´´ -is this the error you got?
@@patrixfpv Yes exactly this one, with the GUI version its CLI says the same, do you have any idea on how to fix it?
Is this only for nvidia?
If you don't have an nvidia graphics card then you need to install sunshine in your pc. You will use it to stream programs from your desktop for moonlight to receive.
Hi! First of all, thankyou very much for your hard hard work!
When I try to use usb mode, an error appears:
root@pigeon_wm150_gls:/ # exec dji-moonlight-shim --usb
WARNING: linker: ./dji-moonlight-shim: unsupported flags DT_FLAGS_1=0x8000001
You know what that is?
Best Regards
Hi! If I remember correctly, I see that error too but it doesn't affect the stream. Also, now, there is a GUI version and is much easier! Check out the pinned comment in this video
@@patrixfpv Thanks! I no have this issue when I click stream:
unable to claim interface: (-12) Operation not supported or unimplemented on this platform
No video is streamed on the goggles, I use Windows 10
Try this, close all apps, power up your goggles and wait for it too boot completely, plug it in your computer and run Zadig(maybe you don't have it, maybe you do), click options and tick "list all devices". Then from the device selection drop down menu, choose bulk interface. Does it show WinUSB?