Atari 2600 Controller Not Working Fix | Atari 2600 Controller Repair
Vložit
- čas přidán 23. 08. 2024
- Is your Atari 2600 controller not working? Pac-Man not moving or Pitfall Harry not jumping? It might just need a good cleaning and some new dome switches. In this video, you'll learn how to do an Atari 2600 controller repair through a complete teardown, cleaning, dome switch replacement, and rebuild.
Two good notes about this video:
My friend Jesse over at Ivory Tower Collections mentioned he uses a product sold at Walmart called De-Solv-It to remove that adhesive. He said it does a great job and those old chunks of tape can slide right off if the De-Solv-It is left to penetrate under it.
Second, around the 10:40 mark, you'll see a white tab on the joystick tab oriented in two different directions when it's reinstalled into the top shell. Although it was an editing goof, that tab can indeed be installed either direction as there is a groove on both sides to accept the tab into the top shell.
If you like videos about video game hardware repair, restoration, and modding, and other great video game content, subscribe so you don’t miss new, original upcoming videos:
➡️ www.youtube.co...
If this video has been helpful, buy me a coffee to support the channel!
➡️ www.buymeacoff...
---
Links:
SELF-ADHESIVE JOYSTICK DOME SWITCHES - 10MM TRIANGULAR / 3 LEG
console5.com/s...
Atari 2600 CX40 Joystick Parts
www.best-electr...
SC Johnson 623181 Q-Tip Cotton Swab, Standard, White (Pack of 500)
geni.us/qtipco... (Amazon link)
Magnetic Screwdriver Set 10 PCS, CREMAX Professional Cushion Grip 5 Phillips and 5 Flat Head Tips Screwdriver Non-Slip for Repair Home Improvement Craft
geni.us/magnet... (Amazon link)
AmazonBasics Multipurpose Office Scissors - 3-Pack
geni.us/titani... (Amazon link)
Fiskars 167110-1001 Heavy Duty Die Cast Craft Knife, 8 Inch,Orange
geni.us/fiskar... (Amazon link)
Mr. Clean Magic Eraser Original, Cleaning Pads with Durafoam, 9 Count
geni.us/mrclea... (Amazon link)
Dawn Platinum Dishwashing Liquid Dish Soap (3x24oz) + Non-Scratch Sponge (2 Count), Refreshing Rain, 1 Setgeni.us/dawndi... (Amazon link)
---
Music:
Chiptunes = WIN, available from the BandCamp website here:
chiptuneswin.b...
-
DISCLOSURE: I often review or link to products & services I regularly use and think you might find helpful. Wherever possible I use referral links, which means if you click one of the links in this video or description and make a purchase I may receive a small commission or other compensation.
I'm a big fan of Amazon, and many of my links to products/gear are links to those products on Amazon. I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and related sites.
--
#blainelocklair
Atari 2600 Controller Not Working Fix | Atari 2600 Controller Repair
Goo Gone is what I use to get the remaining adhesive off. You can also restore the paint easily with a paint marker. Cool video, man! I hope it helps some people keep their joystick working!
I did my first padhack thanks to this vid! I got the wires going to an Undamned UD-USB and I no longer have to compromise my gameplay with the wrong kind of stick. I can choose between my dedicated 4-way stick for most games, and my 8-way sticks for River Raid and, uh, I guess that's it.
I really enjoy your presentation style and these 2600 videos are among my favourites.
I find you did not show well enough how to reconnect the wires, I would have liked to have seen a closer video angle.
Also at 2:01 you show the tab of the joystick where it is as you start, facing to the top (fire button side of the joystick). then at 10:40 you make it look like you are going to have the tab face the bottom, but is is back to the top at 11:45 before you close it up.
Thanks to this video I finally know how to use the dome switches that Dan Kramer sent me to fix my CX-22 Trak-Ball controller. If you have any of the Trak-Ball revisions I would like to see a video similar to this for one of those.
Thanks for the links on where to get replacement parts.
Great video! Do you know where to buy dome switches now? The link you shared is out of stock.
Awesome channel! Joel with Media Glitch pointed me this way. Subbed! 😃
A relatively common problem I also encountered back in the 80s was that the center peg that supports the white, inner shaft would sometimes break off. And with the joystick case being made of ABS plastic, no commonly available glue would hold it. I tried superglue, epoxy, etc. NOTHING worked on it.
Do you have an updated store that sells these dome switches? It looks like that site stopped manufacturing them. Thanks!
I want to see a CX10 repair, there's hardly any tune up or repair videos about them.
Great video, sad you have so many ads.
Hello, and thank You for Your videos! I have a question, Do You know if pcbs can die? Like, can they get to a state where they just won't work no matter what You do, even tho they appear to be in great condition and look like they are absolutely fine? If so, what would cause this to happen? Thank You for Your time!!
Inside the joystick handles of the controllers is a white stick of plastic with a ring at the bottom. On each side of the ring is a nub that sticks out and presses down against each dome to make contact with the circuit board. The plastic nubs and rings on my controllers are very stressed from years of use so they don't stay firm when pressed down. Any advice? Perhaps I could cut a few metal washers to loop around each nub's side of the ring with gorilla glue to reinforce it? New plastic sticks will wear down again over time, I'm aiming for a longterm solution.
Thanks
Media Glitch sent me! 😉
When I go to the site to buy the dome switches. They say they are out of stock. Do you have another source?
I can't find the dome switches on eBay either. Anyone know where to get them?
What David and Tyler said...
Do an Atari 7800 controller fix pls
Fires but doesn’t move back and forth.
Does anybody where these domes are sold in Europe? TIA!
That'll probably be a question better asked using a search engine.
thats not a controller it looks more like a claw machine controller