Mods to Make Your Ninebot ES/MAX Scooter Faster! Unlock Its Full Potential
Vložit
- čas přidán 15. 08. 2020
- **It should be beyond obvious, but I am in no way responsible for anything you do to your scooter as a result of this video (and while we are at it, can we just say no video on CZcams should be responsible for anything you do? These are all educational or entertainment videos). I can try to help, but I never made any of the software or hardware that is featured in this video. Also as time goes on, software may make this video invalid (a newer video may be made, but no promises.) Proceed with caution, follow your local laws, and as always, mod and ride responsibly!**
Check out the RWR Discord! - / discord
Support the channel via Patreon! - / realworldreview
IF YOU ARE LOOKING TO BUY A SCOOTER, BUY THE ES4 IN THE LINK BELOW. THAT IS THE ONLY ONE I WAS ABLE TO TEST!
Today I will be showing you how to make your Ninebot scooter faster (obviously only when your scooter is region locked.) This may not work for everyone, but if anything this should give you better torque. With this said, battery life might be worse after doing this, so proceed with caution. I am not liable for anything you do, and remember to check your local scooter laws so you don't break any laws!
What You Need;
Android Phone with working Bluetooth
A scooter that supports Bluetooth (E22, ES2, ES4, MAX & MAX G30LP)
XiaoFlasher and ESdownG
Links are here (I told you, but no, you wanted to leave a comment first. Always check the description, it's just words)
XiaoFlasher - play.google.com/store/apps/de...
ESdownG - play.google.com/store/apps/de...
Where to make the flash bins - esx.cfw.sh/#
Where to Buy the Scooter (affiliate links)
Ninebot E22 - amzn.to/3g2ciTm
Ninebot ES2 - amzn.to/2CuVMO7
Ninebot ES4 (this video) - amzn.to/344xExp
Ninebot MAX - amzn.to/2CwppyJ
Ninebot MAX G30LP - amzn.to/3asQI9C
What else should I teach you? Let me know on here or on Twitter / mattofrwr . - Věda a technologie
99.4% of you are not subscribed, so there's that. But here are some things to note. First, I am using an ES4 and it's been a couple years since I posted this video. So this video may or may not work for even the ES4, and I have NO WAY to tell if a newer/older scooter model will work with this (I do not have the money to test every scooter lol.) Generally the ES4 has 2 batteries, which allow for enough power to bring this above the 15mph it is limited to. Would I recommend you just buy a scooter like the Segway P65 (amzn.to/3OTqnX1 all amazon links will be affiliate links btw) that already goes over 20mph stock? Absolutely, but you probably already own the scooter. But here is what I recommend. I currently have a Bird ES4-800, which does not pair with any apps because bluetooth is locked down. What I did is changed the dash board (amzn.to/3EcA7qg this is the one I used, but you want the green dashboard, like this amzn.to/3qHFpXR) and then followed the steps in the video. You should be able to use this app to get the same results though if the apps in the description aren't available (even though they are in the US) play.google.com/store/apps/details?id=app.peretti.m365tools&pcampaignid=web_share
Also borrow an andorid phone, this will never work on iPhones unless you make an app yourself. Ever.
I’ll subscribe if you tell me what the app is called because it is not coming up on the App Store on my phone.Good vid tho🎉Pls tell me the app is it called shao flasher?If not what is it called?Ill sub if u tell me😊
Also I have found the name now but do you need XiaoFlasher because it doesn’t come up on my App Store it just comes up with mine it Segway
And does the app called something like es downg help with increasing ur speed?
@@LF7King yes
Is it called es downg tho if not what is the second app called?
For ES3 w extra battery worked for me!!!
Did exactly what in video!
before max speed 17mph = 26km/h
Now max speed 20mph = 32km/h
Hi Alex, how are you? I have the es1 with battery that would be the es3. I have the BLE in 1.0.9
Did you downgrade to BLE106 and then change the config?
I was able to flash it, what preset did you select in esx.cfw.sh/#?
What preset did you use, es4, or default? I just got my scooter and dont want to mess it up
@@jacobthechinchilla8157 bro i did it and my scooter is realy messed up it dont charge fully and goes slow
@@KIEL-xe7xq were you able to fix it? i am about to do it but after what you said i am not
filmik ekstra. wreszcie ktos pokazal wszystko krok po kroku. wielkie dzieki
Łukasz a mógłbyś napisać jaki ZIP podmienić w es3 aby jeździła szybciej?
Hello dear friend! You helped me a lot! Changed region and speed 30 at once! I have ninebot E45E.
Hi did you have done the exact same thing on the vidéo?
Thx man! works today 1/1/24 and happy new year :p
Yo! ES4?
Just got mines so excited to try thanks for making this video!!
Land mines?
*mine
Worked perfectly thank you
OMG IT WORKED THANK YOU!
Damn this is scary, torque on my scooter is crazy now :p
-- Can confirm, following the steps exactly as he provided will work for the ES3. When I slight push my wheel, and hold the throttle, the scooter will max out at 32kph. (Without 250lbs of me on it) Thanks for the help man! Any idea what the loud clicking sound would be on my ES3 when going over bumps? I tried tightening all bolts, and the stem nuts in the proper order. No luck.
Clunking noise is a normal operating characteristic of the front shock absorber (coil spring) according to segway. no need to modify or worry about 🙃
I was wondering the same thing I just got one and now I feel slightly better lol thanks
Mine was doing this, and was very confused. Thought I had a bearing issue or something loose. I took compressed air, blew out all dirt and debris from rear shock, sprayed some chain lube on spring. Noise went away
You just have to prepare for it and lean back slightly..I'm 250 too and I've learned how to smoothly let the suspension not sound like an explosion.
Ur too heavy men ju break da scooter brank brank
Thank you bro I did this last year in September and everything went well until I ran into some problems with my extended battery in may last month and i had to update the scooter since I fixed the battery and put it back on the scooter yesterday. After the update it went 25kph so I watched this video again so thank you so much.
Updates Will Most Definetly reset The Hack
It works mad on my es2 since unlocking it with the duel battery full chargered it get up to 37km 🤙
To most wanting to do max speed make sure to enable No KERS, this ensures that you don't do a front flip when you let off the throttle at max speed. When going speeds above 15mph, the braking system gets a little wonky and seems to apply a lot of force that you need to physically change your posture to compensate
And lean towards the back always. Braking will always throw you forward regardless of what you're doing.
Good catch lol
k😢iu
@@nikossurvivalKinetic energy recovery; it saves your scooter's energy under braking, allowing the scooter to reverse its motors to slow down without using brake pads, and accelerate quicker
I’ve tried this method and a few others on my E22 and cannot get the software to the earliest version. Can you make a video to show me how to do it correctly? (E22 bought in 2023)
KERS is kinetic energy recovery system, and when you release throttle it recharge battery, its using motor to generate power and slowing you down
This actually works!!!
How do I turn my bluetooth on
will a new battery make my scooter go fast longer than 30 mins
I tried it and did the same as you did exactly the same actually. Before he went 27kmph, former owner also tuned it up a little. Now he's going 23kmph max and I set the max speed on 40 like you did. But I heared stories 30 or even 27 kmph is the max it could go, so I had it on his top speed before doing what you did. Maybe it's because someone already made it run harder
Mine went 37 k/m
its good bro!
good job ty
Would this work for the Ring RX1 as well?
I have a ninebot bird 300. The BLE version is 0.0.0. I can't find the right flash from Xiaoflasher. When I try an attempt to flash It will cancel because of to many attempts. Do I need a ninebot display?
did you ever figure this out? i'm struggling with this also and scooterhacking.org doesn't say much about it.
Try some other flashers. It being a bird scooter might have an affect too. Try Either Xaioflasher or ES down g, (one is in the video) just make sure to create a new zip file to match the right flasher. But if it’s firmware is 0.0.0, it has likely been removed and is incompatible without a ninebot display
Thanks 👍 it works my speed was before 25 km/h on my es2 now it's 30 kmh
Thank u so much its worked !
Does it really work
@@beratotac7235 yeah my friend !
Yo i have a question. So my ninebot es4 got a little to much rain yesterday and turned off , but i got it home and turned it back on and once i did it ran normally, BUT the one thing is for the red gear mode doesnt go top speed anymore ... It stays at 20:(
I just downloaded your guide in hopes of making the top gear faster again in ANY WAY lol ill lyk in a txt update on this post if it did work . if not plz lmk what u think is wrong n what i can do
Jo bro i got it now too did you fixed it if you fixed it how did you fixed it want to fix it but i dont know how
Ok nevermind... I engaged red sport mode.. And HOLY SHIIIIIITTTTTT
IT actually worked wit e25e, thanks
What will you do if you cannot turn off and on your scooter after using these methods here?
Yo we got to see matt in person.... epic
It happens lol
@@RealWorldReview Can u help me, my app doesnt say the BLE thing it just says the other 2 versio things
@@RealWorldReview mine says only the bmc and esc ones
@@RealWorldReview pls make a new vid bout this
When I get a scooter that will work it this. The one used in this video is no longer here
OMG TYSM THIS IS SO GOOD this deserves a like and follow
It work!!! I love u
Thanks for this instructive video. Will this work with a Segway Ninebot E2 Plus, currently on sale at AMZN? It looks like xiaoflash app was updated in September '23 so I'm guessing probably. Also... what's the difference between this and cutting the "blue wire" as per that German video?
Hi there. I followed your instruction step for step on my ES3 and unfortunately my scooter goes slower than when I first started. I went from 17 mph to 13 mph. I did the steps again thinking maybe I missed something and after 3 flashes to the scooter I'm still only able to go 13 mph. Is there anything else that you may know that I can try to get back to the 17 mph on Ninebot ES3?
dude I think this video is a scam
Lol
Not sure how well it work on ES3 due to motor size. But you can use “m365 tools” to try to fix that issue.
@@RealWorldReviewwork this also on ninebot e2 plus e?
Mine goes this fast out of the box after a an update it went even better especially when hill climbing
yeah out of box i'v been able to hit 31km o_o and im 180lbs
@@herbaldragon7646 how can I get it to that speed !
Mine goes 31 too
Mine goes 33 km/h (105 kg)
Mins went 25 once and then an update set it at 21 miles
Worked! Ninebot KickScooter ES2 25km/h to 30km/h
thx man.
What preset do I use for a ninebot es3
Did you find out what to press? I’m still confused
@@sunnytoor5040 I used the ES4 preset for the ES3 and it works perfectly fine, just make sure to downgrade the BLE to 1.0.6 or else check version wouldn't work so that you couldn't be able to flash the new firmware
Worked for me but I had to go back to version 1.06 even though I was currently on 1.10. Not sure if it would have worked for 1.10 but I couldn't get the check ver to work
im having the same problem how did u change back to 1.06?
@@oskarlefevre9778 Good question
I try to do on my Es4 but not work, the screen is on only 1 second after the screen is off and sound "bip, bip, bip" a lot of times, and not working, what can I do?
Es1?
E25d??
works on my ES2 now my max speed is 30kph from 16kph. is it ok to update firmware or not?
Could you help me with this problem. I tried everytime to get the es4 zip version but instead its giving me de ESC2 zip file but everytime i press on es4 it will disappear when i press something else.
What preset do you use for es1?
Did you figure it out? If so what preset
default
Es1 , from 20km/h to 22km/h ,,😁
@Real World Review will it work with the ES1? (The scooter works with Bluetooth)
I am interested to know if it works on the ES1 too.
@@rubioedwin it does I used it on mine
Hey bud can u tell me what did you do to hack yours i know it was a while ago but i just got an es1 but i tried different ways and still nothing @JpIsNumber1
Btw i am worried if my scooter starts to glitch should that be a problem
1.42 I have no option on xiao flasher to select a ble zip that section is not there for me my ble version is 2.1.3. I assume this is why i cannot check version in the later steps of the video on Es down G. Any help would be a greatly appreciated 🙏
Does this work on the Ninebot by Segway KickScooter E25E
yeah
Worked for me with ES2 on a Samsung Galaxy S9.
Also, anyone with a Error 21, it will still flash and you can use option "stealth mode" to stop it from constantly beeping. Since the wheel is disconnected from the board in the tube, it wont spin but it stops it from beeping and still works instantly when the wheel is reconnected. Once the wheel is fixed, reflash it without stealth mode to turn back on battery stats.
what preset did you choose?
@@johnchang8652 Preset "ES4" is what I used universally throughout all ES models (ES1, ES2, ES3 and ES4).
@@ajdeswart thanks for feedback
does it work on the 20 note +
@@HustlerBiz34 It should, yes. For all modern androids with Bluetooth.
for es1 the BLE version is 1.1.0 and there arent that option what do i do?
Xiao flasher recognizes and connects but there is no information. The ble and everything else is blank.
Es2 lite it works? With the ext. Battery
Yes
Absolutely Amazing, it is so crazy, I got 5+ mph out of my scooter after doing this hack ⭐⭐⭐⭐⭐
Idk how to
How do u do this with the ninebot max
the BLE on my scooter reads 2.1.3........the BlE options do not appear in order to flash....so got stuck at that point. if u have any suggestions, will be appreciated, thanks
I have the E25 scooter but I don't see anywhere to download.the BLE file on the app just the default download. Any ideas ?
Question.
Is it safe? Or are there any sacrifices or cons if I do this to my Max
The motor will wear a lot faster, I wouldn't do that
How do you set it back to factory settings?
I think you need to reset the scooter
@@mathiaboy0791 how do you do that
@@mhabadsherzad1894 from the Ninebot Segway app…
Mine is going 31 but is okay thanks so much ❤
Hey 😊
Please can you do a vid on how to fix the led lights that run along the bottom of an E25e ninebot?
that speed is just in the sport mode, right?
Sport mode only get you at 25km/h
Does changing the speed on the scooter does it deplete the battery faster on a ninebot max? I’ve been wanting to try changing speed from 18mph to 25mph but I wasn’t sure if it would interfere with the 40 mileage on a full charge
Most likely
@@RealWorldReview are the economic and default presets still going to work on the max? assuming you do all of this
@@tkdluvsgoldens733 yes
How'd you go with this? Got a g30 max and wondering if it'll allow me to go faster or up steeper hills when needed. Eco is rarely used, be nice to make that more useful tbh
Does this guide work on es2l if i go step by step or do i need to change something?
The "Default Official Firmware" shown at 3:51 does not show up for me on Xiaoflasher. I tried power cycling the ES3, uninstalling/reinstslling Xiaoflasher, and still no luck. Any suggestions?
Same here
Can someone help every time I want to check version in downg app it says failed due to retry
Yeah i have the same isue
Me too
My ES2 throttle is too sensitive. I mean it is difficult to increase the speed steady. Turning throttle up to let's say to 30% of the entire range doesn't give any tork, then another 2-3% turns the power to almost maximum. Then small turning back turns the motor off. Is there any way to reprogram (or do whatever) to make the throttle behavior more smooth?
You may need to turn off regenerative brakes. I also know after so far the motor has a hard time controlling the voltage once the battery has been depleted a fair bit so it's either power down or full up.
@@TheFreshSpam The battery is full, Energy recycle is Weak. What else should I check to make your advice work?
@@vladimirchapranov I mean other than that theres not much else we can tinker without getting involved in the machine or using other software. Have you tried the other speed modes? Theres 3 options for speed and acceleration. You might be on sports mode, but you might already know all of this.
I'm otherwise hoping your segway is still under a year old? Becuase the manufacturer should honor a repair to either the accelerator, the control board or capacitors for free given you havent bumped it visibly and havnet taken it apart. It's a 1 year warranty from what I remember and people have options to extend to 3 years but most dont, if you dont have the warranty left I'll steer you in the direction of where next
@@TheFreshSpam Thank you very much. The segway is 1 month old. I just wouldn't want to spend my time on sending the device to manufacturer. It is usable, just not comfortable enough. I tried several other scooters of my neighbors, one is exact my model and all of them are moving much smoother than mine. So, I was thinking that I may adjust some settings to make it smoother. But as I already said it is usable.
@@vladimirchapranov Have you made sure your on the same mode settings as your freind? If you tap the power button its switches between acceleration modes. Like long range, standard and then sports. You may already know this though.
One last thing, take my opinion with a pinch of salt, If the acceleration issue is visible compared to others and you have a 3rd opinion agreeing saying it is different to another one of the same type I would suggest switching it and contacting segway as soon as possible, as much as it may be a bit of a hassle. it could be a hallmark sign of the start of a faulty board or chip, which could pop and break later down the line when your warranty is over or you've bumped it around more.
The baseline here is, if it's going faster to tops speeds than other normal ones, it's going to burn out faster, and if it's not programmed that way, it wont do it any good in the long run.
Otherwise, goodluck!
Hey, does this working on ES1 with extra battery??
Does this work for iPhone? Is there any way to improve the speed using an iPhone if not?
I have the es4 and mine went 35 kilometers since the start but again I weigh like 85 lbs 💀
I weigh 80 kilo how tf are 34 kilo are you 7y old?💀
Bruv thats like skeleton shit wtf
dawg 85 lbs😭
Get my boy some food
I have the e wheels e2s v2 pro and its goes 45km
Здравствуйте, хорошие люди. Привет из России!
Спасибо за предоставленную инструкцию и ссылки! Автор, благодарю Вас!
Работает?
wow it worked..amz,.thanks
Hey, for some reason i cant check the version for my scooter?
Any solution? :)
a question, does it also work without max?
I'm trying on the MAX now and I'm running into trouble at the BLE part. Mine says BLE 1.1.7 ....but I dont see that option listed below on the XIAO app
MO POWA BABEH
Donut media moment
I'm going to try that hair on my electric kick today. I have one exactly the same, but no extra battery. / greetings from Sweden🇸🇪😎
thanks man it increased 10 kph of es2
Once you get to the es_down g And ask for version it says "canceled due to retry"? Do you know why this might be. I have the es2
It’s altså hapen for me
Same me
How did you get the file for that ? I can’t see it on the app
Ask segway
I had speed issues with my MAX scooter now runs its maximum speed. no downloading necessary or file transfers and that upload this blah blah follow these easy steps :
1* goto play store and type "ninebot flasher" install "xiaoflasher" should be the first app showing?
2* Install it, turn on the scooter and open the app. Select your device and then it auto reads your device details
3* simply change your region to the highest speed setting.
Its THAT simple. Cant beleive it worked! No one on the Segway community global app could answer me I was getting frustrated lol now it finally kicks ass! 👍
@@NZCLUB_reals can't wait to try this on mine too!
@@gladyslovesraney3637 I've discovered the flash app might cause the segway app to create new and independent profiles meaning : your mileage history starts all over again, basically its a whole new scooter history.. I'm chatting with the guy who showed me the hack and he's looking into how to merge the software... But have fun if none of your current mileage history means anything to you 😊
@@NZCLUB_reals I just got mine not too long ago, so it's ok. But im excited to try it. Thanks for the heads up!
Works
Hi Can you please advise if there is a way to increase the max speed on the Ninebot E10 scooter. It doesn't have a digital screen like the above video.
I done mine the es2 and it worked fine u might need to downgrade Ur software first then flash it with Ur personalised zip as he shows here. It uses a lot more battery tbh but it is more fun so the cut the difference mine does 28kph full charge on flat which I'm happy with it's s older scotter to. Shame the UK can't sort there laws out tho. If u got any questions I might be able to help..
Once you get to the es2 version
And ask for version it says "canceled due to retry"? Do you know why this might be. I have the es2 also
What your average distance on sport mode from 100-0?
@@jadenteamo1336 did you figure this problem out?
I have the same problem, ‘canceled due to retry’
Haha damn, my es2 went from 25 kmh to 32 kmh on a strsight line. Im 95 kg (heavy) so did not feel any diffrence with torc
Did this work on your Es2?
Tja Joakim,
Jag har också en ES2 med extra batteri men får det inte att fungera. Jag har dock bytt ut min original motor på 250w till en ny på 350w. Tacksam för hjälp:)
@@Leonaldi2007 Worked outstanding! I did get a topspeed around 31-32 depending on the wind :).
@@sebastiangreen7671 Hej, det är modifikationer jag inte har gjort på min så jag är nog inte till någon större hjälp. Kan dock tänka mig att det skiljer lite i setupen i programvaran. Har din sluta fungerat helt eller går den bara inte snabbare?
Why only 25km default while mine out of the box is 28km? My es2.
Does the flashing on the ninebot screen come when you unlick the speed? I want mire speed but i dont want the flashing on the dashscreen
Nah the flashing on the screen only happens because he switched cameras to one with a higher shutter speed. The higher shutter speed records the flashing but to the human eye it is impossible to see. For example if you slow mo recorded your tv it would look like it was flashing too. Sorry I’m getting off track. To be clear, the hack will NOT cause the screen to blink
Worked for me! 34kph! Es4
thanks for that vid man how do you disable the kick start feature it’s soo annoying is there a preset for that ? or what’s the preset called kickstart or have they called it something else ? ta ;)
Set the motor start speed to 0
@@intenstudios5113 si pones eso en 0... arrancara estando parado
@@rafasalas6531 uh what
bruh i said that
I have a 250W es2 lite model can it run faster than 28?
And if i replace with 350W motor, how much is possible
It's not possible 🙂 it's bullshit don't believe them
What is the rage of the scooter after hacking with your settings ? I mean I know it will use more power but how much in your case ? Thx !
Also curious of the range after you hack it.
@@Vynien in my experience it’s not worth it , not too much speed and you’ll lose 40 % of the battery range in the standard mode .
I travel with mine 5.5 miles it leaves me with e bar and I would have to charge it up again always on sport mode has a good kick and speed I don’t recommend it if you are traveling farther than 5 miles also very dangerous during the day beneficial at late night hours about 20 to 30 min time to travel 5.5 miles unless you stop or wait at light, fastest I gotten home was about 25min non stop
I ran this through three times on my ES4 and it just didn't seem to take. Nothing happened. It beeped in response to everything (except when the final bin flashing was done, but I got "done" message on the app), but there was no change in my scooter. It is maxing out at a pitiful 13mph and I have no idea why! Any help would be appreciated!
saaame
My phone wont allow ESdownG because it is to new, what do i do?
Wow, thank you for the video Mate! Just done mine and fking exited about it, I got another problem if you could give me a hand, when riding without lights on, is all good 36km/h, but when I turn on the lights, it only goes up to 24km/h, and it been like this ever since the beginning(since brand new) never had the time to take it to warranty or like that. Any thoughts? Take care
It’s for safety reasons because if u turn the light on it means that it’s dark therefore the scooter slows down
@@yr7127 its not this reason, ninebot scooters are full of problems, its most likely the braking system that limits the speed, in time it can go to braking the scooter completley and you cant even move it, but its a tutorial on yt on how to fix it. Mine goes with 25kmh which is the legal limit
@@sebastianandrei473 who wants to go the legal limit tho
Living in the Bay Area, no one
I have a ninebot max after ES_downG connects it times out when asking for Scooter Version. What can i do next?
Just use XiaoFlasher
@@krypticmsg9 it just bricked my scooter
@@kaylabrewer8748 idk what people mean by brick, but a few times I didnt follow the correct steps and the screen on the scooter went black and would drive then randomly turn off . So I just reset it back to the earliest versions of BMS,BLE,AND DRV, and it turned back on, I had to do it while the charger was still in. I dealt with more of a Bluetooth issue than anything.
You can also use Ninebot Flasher app from a PC, and connect to scooter via bluetooth.
Hey man I bought a e22 amd Im a bit confused in order to unlock max speed. Can I follow the samw process with a e22?? Also do you think the e22 is a good product or not. I feel lile I rushed to buy it and now I feel like its a shitty product. But I paid 130$ and thought it was a great deal. What do you think about this and how do you feel about the e22??? Thank you
Bevcause all the reviews and critics are about the ES series( es1 es2 ws 4 etc...) and when I went to set up a zip file with my preferences to flash the scooter. And when I pressed ok I had a warning that Im doinf something on a esx_p that is made for esx. Only proceee if you know what you doing. It can damage the scooter. Brick status ... so I refused to flash it. But was I right not to do it or is it something that wont damage anything ???
You are a fuckin legend man all respect to u💪🏽💪🏽💪🏽💪🏽💪🏽
man mine work ed the first time I did this but then after getting an error code 48 now won't even recognize my external battery so I can't get it to go past 9 miles an hour! any suggestions would sure be greatly appreciated
Hey Can you plzzz tell me how to write Down the name of the app
Damn
Did you fix it bro?
@@danogamal66 xio flasher
I messed up my scooter now when i turn it on the magnetic break breaks it and i cant rotate the back wheel
did u get a fix or is it messed up for good?
It happend to me to my back wheel got brickd
That’s why you don’t mess with this kind of stuff it gets bricked quick
The back wheel doesn't even have anything connected to it tho lol
Was gonna try this now I'm not lol
tks brother
Had any experience with throttle response? The flash worked great, Thank you!! Butt it lags when I let off the throttle, it wants to keep accelerating for almost a second.
Yes, just something I have gotten used to. Might be related to the regenerative braking, or lack off.
WHAT DO I HAVE TO DO IF THE RED LIGHT STARTS FLASHING ON THE BREAK PART N THE RED WRENCH FLASHING ON THE HANDLE BAR???
Does it show error code 15?
you have to restart the scooter
Don’t listen to this guy 😂
If it's error 15 ur brake is broken or smth because i have the same thing
The rear brake light on the back of the scooter always flash with the beeps when there is any error. While its doing this it will also flash a number or a variety of #'s but displaying 1 at a time but pay attention to what # or #'s it flashes to u cuz thats how u find out which part of the system is causing that error. Then u can look up the issue by error specific error on CZcams or u can google Ninebot error code list and save that list. Good luck!
for me everytime i hit check ver it says “cancelled due to retry”
Got the same problem
same
Any solution youguys have been able to find?
Same
What worked for me was to just use 1 app to do this in this case the first app he uses not the 2nd one
does it work for F models? I have the F30 Model and need a lit bit of more speed
Do you know of you can just change region in Xiaoflasher up to 30kph? Seen a few things on the interweb where it's broking the unit. Is this the case only when uploading custom firmware? Is jist changing region not an issue at all? I'm in the UK and it's limited to 25kph
Hi, did you work this out? Mines still at 15mph