Paint and Weathering a 3D Printed Model Railroad Building: Detailing Building 2
Vložit
- čas přidán 5. 08. 2024
- SUBSCRIBE TO BE ELIGIBLE FOR THE 10,000 SUBSCRIBER GIVEAWAY SPONSORED BY TRAINWORLD!
Check out our sponsor!
www.trainworld.com
Entry video
• 10,000 Subscriber Give...
Check out my Etsy Store!
www.etsy.com/shop/DIYandDigit...
Check out Building 5, the Fast Food Festaurant, and Building 2!
Today we are working on Detailing the first building that I ever finished 3D printing successfully. Building number 2. We are going to be using Spray paint and pastels to paint and weather the building!
Link to Detailing a DPM Kit
• Building a Design Pres...
Red Paint
amzn.to/3id86CT
Concrete Paint
amzn.to/3g6HHVd
Door Paint
amzn.to/2NCpfaT
Roof Paint
amzn.to/3eGVNwd
Pastels
amzn.to/2CTxi17
Paint Brushes
amzn.to/3id8fWX
Painters Tape
amzn.to/3dJxqNf
Double Sided Tape
amzn.to/2Zi1OZN
Printers Used
Anycubic Photon
amzn.to/3dEJkI3
Elegoo Mars
amzn.to/386NZSa
Flashforge Finder
amzn.to/2YEItCY
Samaritan’s Purse
www.samaritanspurse.org/
Camera Used
amzn.to/2X87yWR
Support the channel with some Merchandise!
teespring.com/shop/diy-digita...
You can contact me at diyanddigitalrr@gmail.com - Jak na to + styl
Thanks for showing your painting and weathering process. And I really like that you threw in some bloopers at the end.
Jimmy, you have become a realtor of miniature properties. So awesome. Thanks for the tips. Your buildings are very nice. I look forward to an ever expanding inventory. See ya.
To avoid bleed under your masks hit the model with a clear gloss first, allow it to dry, then use your final colour.
When you mask something with tape that has already had an underlying color sprayed on it, spray the edges of the masking tape with the underlying color. This will seal the edge of the tape and prevent the next color from blending under the edge of the tape. I'd like to have a couple ho scale building #2. Fit perfect for a building I've been looking for.
That's a great tip! I am trying to figure out the logistics of HO Scale buildings.
When masking shoot a quick coat on the edge of the masking tape of the same color your trying to preserve. This will seal the edge and any leakage will be of the same color underneath. I use this method when painting a room in our house. Gives a very crisp ceiling to wall line. I use a brush there of course.
I've painted my house many times over the years, and as perfect as I want those cuts, which you can get pretty good at doing, I would never want my HO scale buildings to look perfect.
Love your use of chalk to weather! Perfect effect.
I'm very pleased with the building I purchased! You do nice work.
Great video Jimmy. Detail is phenomenal.
Useful techniques -- TYSM!
Your pretty good at painting and weathering those you made it look easy
Excellent models Jimmy. I am going to your Etsy channel to find these products.
These look great! I've been doing a lot of the Outland models and these look to be way better quality!
These look perfect, like they way you present them, suggestion try the Frog tape....thanks for sharing....Jack
Very nice that you’re prime these for everyone as that’s normally the worst thing to do which is clean and prep. Can’t use any because I’m Ho but nice you are doing this for n- scale. You need to move onto industries. Okay adding cool on the HO building.
Thank you 🙏
I really like the buildings you've made. I am needing some more on the industry side. I do not see many kits if any for a scrap yard that would have a small office building with a truck scale in front. Just an idea. 😁
Jimmy, have a couple of your buildings and a couple more on order.I too, would like to see more industrial-factory type builds as n scale not many to pick from. Thanks, Mel
Thanks Melvin! I actually just packed a couple of your buildings this morning! I plan to do industrial buildings soon!
@@DIYDigitalRailroad Can't wait Jimmy. I hope you do some "low relief buildings as the "flats" just don't look right to me. 1 inch to 11/2 inch wide would be great as they can be made to look like REAL buildings!
FYI DPM of Linncreek MO already sells your kit style buildings in N & HO priced low
will have to check out the HO scale buildings. thanks
I"m interested in the HO-number 2 building. I'm also a designer, maybe we can share some of my buildings. I do mostly resident...
Why didn't you put a clear coat on after taping everything off? The clear coat will stop any paint bleeding.
Hi Jimmy I wanted to let you know that I am not getting emails informing me of anyone's videos. Don't know why and yes I have hit the bell for all. Besides that your buildings are fantastic. Also I quite using blue tape it always bleeds. Try frog tape I'm getting much better results
Well since I used blue tape for decades to mask of cars worth as much as people's homes.. I can with confidence tell you, you are doing something wrong
Would you consider N scale kits for factory sized buildings? Something on the order of "George Roberts Printing" kit say. For doing more of an "urban" type scene. I am thinking like the factory that sat by the tracks in Freeport IL or a tall warehouse like Des Moines IA.
Really great work at prices I can afford! All I could think of when I saw the bloopers and brain farts at the end was "Jimmy - remember that whole "make sure you're in a well ventilated area when you use spray paint" thing? Yeah, well... that. 😂
A new subscribe with the "all new posts" bell. Are there any types of paints that shouldn't be used with resin? I just put down the $180 for the Digitrax Zephyr, have a decoder for my Kato E5 on the way and will be going to Home Despot tomorrow for some 12 gage copper for the main buss. Do you recommend stranded or solid core? I've watched a lot of videos a 11on CZcams about getting wired. I get the impression that some of these guys (commentators) are wrapped kinda tight regarding how they do things - especially when they differ from how you do things.
Thanks
Jimmy,thanks for sharing,how to paint the buildings.I have a question,how long do you keep the tape on the building,before taking it off? Thanks again for sharing how to,please show more,and stay safe and Peace for the world.✌🌍
Hey Bob! Thank you for the kind words. I defer to how long it takes the paint to dry to the touch on everything but the base level. I let that cure overnight.
Very interesting buildings. Thanks for supporting N Scale. Can you tell me how easy this material is to cut through? I would like to build the row houses so that they are right up against each other like they share common walls. That is how row houses are normally built in my area. I figure if I can cut off the molding on the sides that face each other they should butt right against each other. Need to trim the bases as well. Hope you will consider some industries next.
Thank you! I love N Scale (and all scales haha!). I will take one of my bad prints and do some cuts. I know it sands easily.
@@DIYDigitalRailroad Sands very easily but I recommend wearing a mask when you do. Do you have a recommendation as to what glue to use with this material? I accidentally dropped on of your buildings and need to glue it back together.
dont use spray paint cans for N scale use airbrush and you dont own a "small" paint brush if you did you could hand paint it all faster with less mess & redos. those thick layers of spray can paint fill all details like Brick Mortar which I use lite washes to fill in for much more realistic finish
I love your printing, what printer did you use to print the building to get good brick detail and do you think i could get the same detail result on a Ender-3 V2 3D Printer
To answer your question, it'll get really close. I've been printing houses for a 10mm wargame and it's surprising how nice detail we can get our of the ender 3 printers
Are you still printing these? If not do you have tbr stls for sale?
A tip for your mortar washes. Use tempura paint. If you don’t like it wash it off but it will hold so much better than that chalk. Either that or use some alcohol and water and make a chalk wash.
You don't need to buy other paints, you can make washes out of acrylic, without alcohol, and when you are using chalks, you should finish with a flat clear sealer. The last thing you want is for your finished product to look like it came out of a box.
do you have these buildings STL files available on Thingiverse or ?
I'm assuming N scale, but nowhere did I see you mention the scale of first set of buildings!
You originally discussed selling the files for these buildings, are you still considering this?
What I am considering now is a Patreon page that for $1/month you get access to a model of the month.
I'll take kitbashing over printing any day of the week. I personally feel that printing and using home die cutters ruins the integrity of the hobby.
I enjoy your videos but you talk waaay to much!!!
yes... this video could easily be cut down to four minutes and be just as informative!