here is some physics you need to understand. those spokes are making way more crossover angle than it should be.. the tensile strength of those spokes are not adequate enough to handle the bike weight which is being generated more because of off center wheel placement. in layman term spokes are taking more weight than it should be and high crossover angles making it more prone to break and off center wheel will put torque force over that high crossover sopke so it will break rapidly.. plus the front tyre will wear off very very early and unevenly. This set up has high chance that it will cost your life.. which is way more ridiculous than repairing puncture . this rims do not worth penny. save life safe drive
@@sufiyanpathan3520 they might look alike... but they are not same. and this is not a good counter point to address.. otherwise I'll have answered it... firstly understand my previous comment fully.
@@sufiyanpathan3520it's not the way the rim is but the way it has been fitted which is off centered that will cause uneven wear on the tyre... Will put more stress on the hub and spokes
Hi there bro, really liked the way you explained the matter with Dismotech cross spoked rims. It's about 8 months since you posted this video so what is the current situation with those replacement rims, any more broken spokes? And do you recommend them for Himalayan scram (rear wheel only) ?
@@AvishekLama Thanks for the prompt reply, and yes even I thought the same after some web searching, but since you had first hand experience with em so thought about asking you. The re cross spoked rims are available outside India in the new Himalayan, but not in India I hope they would be out by a couple of months.. fingers crossed, ha ha.
Sorry bro I don’t have zentos available near by also I don’t want to suggest u by just looking at the spec sheet. It would be great if you kindly get in touch with some one who has one or has ridden both.
See practically I would suggest not to go with it considering the high risk of breakage. But yes if you are ok to compromise them yes u can go ahead. Few people have grinded their brake calliper just to ensure the rim doesn’t touch the calliper
But bhai ye humare jaise non yourubers ke liye esi replacement service denge kya? We all know about previous customers who’ve had poor experience regarding delivery timeline fkup, paint damage on the rims due to poor packaging and worse customer support after the payment is done…
I did they are holding fine but still the points I have highlighted are my concern. It may be an issue for many and many can live with it. So totally upto people
स्पॉक रिम कैफ़े रेसिंग कल्चर की "आत्मा" है, इसके बगैर किसी की भी कैफ़े रेसर बाइक अधूरी है. मै आपसे पूरी तरह सहमत हुँ और मै भी स्पॉक रिम ही प्रिफर करूँगा. Sir एक सवाल है प्लीज help me - मेरे पास GT 535 है, तो क्या ये आपके रिम मेरे बाइक पर फिट होंगे?
हाँ भाई होना तो चाहिए फिर भी में यही सजेस्ट करूँगा की एक बार इनसे बात कर लो यह इंस्टाग्राम मे हैं @dismotech. और एक बात इनको बनके आने में क़रीब २-३ महीने लग जाते हैं
This dismo guys are totally unprofessional, have ordered tubless rear wheel for 5 months now. They don't reply to your dms. All they say is ok sir, yes sir. Feels like I am scammed.
here is some physics you need to understand. those spokes are making way more crossover angle than it should be.. the tensile strength of those spokes are not adequate enough to handle the bike weight which is being generated more because of off center wheel placement. in layman term spokes are taking more weight than it should be and high crossover angles making it more prone to break and off center wheel will put torque force over that high crossover sopke so it will break rapidly.. plus the front tyre will wear off very very early and unevenly. This set up has high chance that it will cost your life.. which is way more ridiculous than repairing puncture . this rims do not worth penny. save life safe drive
Zontes has factory fitted the same type of tubeless rims, how are those in comparison with dismotech
@@sufiyanpathan3520 they might look alike... but they are not same. and this is not a good counter point to address.. otherwise I'll have answered it... firstly understand my previous comment fully.
@@sufiyanpathan3520it's not the way the rim is but the way it has been fitted which is off centered that will cause uneven wear on the tyre... Will put more stress on the hub and spokes
बधाई हो बड़े भाई
Waiting for next vlog da .... Keep it up 👍♥️
Waiting for review for these rims ... would love your thoughts!
Loved it bro❤❤❤
Thanks mere bhai
Nice avishek da❤❤
Thank you 😊
Congrats for Adhura bro....
Thank you 😊
Hey give us an update on these rims ! ride quality, durability etc.
Great.
What Tyre pressure do you use for the new tyres?
A little on the higher side
Hi there bro, really liked the way you explained the matter with Dismotech cross spoked rims. It's about 8 months since you posted this video so what is the current situation with those replacement rims, any more broken spokes?
And do you recommend them for Himalayan scram (rear wheel only) ?
The rims are working fine as of now but I still wouldn’t suggest it for Himalayan.
Better wait for the re rims
@@AvishekLama Thanks for the prompt reply, and yes even I thought the same after some web searching, but since you had first hand experience with em so thought about asking you.
The re cross spoked rims are available outside India in the new Himalayan, but not in India I hope they would be out by a couple of months.. fingers crossed, ha ha.
@@AvishekLama on a special note, it felt good that the only detailed video online on Dismotech tubeless rims is from my area.. I am from Alipurduar.
Bro is stem mount mobile holder is compatible with gt 650 ?
Depends on brand
Dada maine v order kiya hai dismotech ka rims for rear tyre only. Rear rim setup karna easy hai kya front rims se?
Rear bhi muskil hai but front se thoda halka hai
bhai aapke review ka wait kr rhe hai sab
Mauka hi nahi mil raha hai bahar jane ka baki joh joh problem maine mention kiye hain ussey problem nahi hai toh le sakte ho
Is the front wheel still slightly offset to the left?
Yes a little but not like before
Check out their new Tubeless X2 rims. Apparently no spacers and alignment issues.
Bro please make a video on which tytes are best for continental gt650 for places like shimla which hai good road and little off-road
Any 60-40 or 50-50 tyres would be good like Pirelli scorpion rally
Can anyone suggest.can we fit tubeless spoke rim from zontes gk350 on gt650.i asked the price ,showroom is selling them for 26000 rs.
1 piece for 26k or whole set?
@@kakarotshawarma87 1 rear rim
From where did u buy these bro pls help
Bangalore
Its look nice but is it safe for hilly areas like Himachal 👍
Won’t be able to comment on that as of now coz I just installed them recently. Will come up with a feedback video soon
Brother any plans for Big Bore kit Update ?
Initially there was but then later I ditched it now the next upgrade is the triple clamp and handle
@@AvishekLama waiting for it 👌
Dada gt er purono model vs notun model er upor ekta video banale valo hoy
Try kori nitey kothai theke notun
Bro Zontes GK350 Bike have same outer spoke rims why not do that tubeless rims can't fix in GT 650 plz reply bro 🙏 is that possible to fix to GT
I haven’t tried it so it will be difficult for me to comment on it.
@@AvishekLama bro plz have a look Zentos GK350 plz about it
@@devareddysanthosh7075 sure will look at it and get back to you
@@AvishekLama waiting for your reply bro❤️
Sorry bro I don’t have zentos available near by also I don’t want to suggest u by just looking at the spec sheet. It would be great if you kindly get in touch with some one who has one or has ridden both.
waiting for feedback video please post it as soon as possible bhai
I am done with it bro
ok so please guide me bhai . should i purchase it or not@@AvishekLama
See practically I would suggest not to go with it considering the high risk of breakage. But yes if you are ok to compromise them yes u can go ahead. Few people have grinded their brake calliper just to ensure the rim doesn’t touch the calliper
Please let us know how are the rims holding up so far, any trouble? I’m planning on ordering a pair from these guys. Cheers !
As of now they are holding fine also if u have no issues with the things I mentioned then u can go ahead with it
Thank you for replying Avishek! They have a new version now that comes with no spacers. Just plug and play. I will let you know how that turns out.
@@leongirton2931how has your experience been so far
@@leongirton2931how did it turn out please share
Bro in dismotech there is another tubeless rim pro has come what about it bro it’s better to install that rim
Haven’t heard about the pro version
Dada super bike
Jald
But bhai ye humare jaise non yourubers ke liye esi replacement service denge kya? We all know about previous customers who’ve had poor experience regarding delivery timeline fkup, paint damage on the rims due to poor packaging and worse customer support after the payment is done…
Brother please buy 5 inch wide 17 inch diameter rear rim from dismotech
No bro I am done with dismotech
Why dont you just use the conversion kit?
I wanted a broader rim
so you didnt do test run on this new replacement rims 😄
I did they are holding fine but still the points I have highlighted are my concern. It may be an issue for many and many can live with it. So totally upto people
so can you tell me did you try in high speed like 160kmph@@AvishekLama
@@apnagaon6498 yes I did. Didn’t have any issue
hope it wont crack while running over potholes
That’s the fear I have
That’s the fear I have
That’s the fear I have
That’s the fear I have
let us know the long term review@@AvishekLama
Disk uulta lagaya he apne
Thank you so much bro ..jald baji mein maine notice hi nahi kiya
@@AvishekLama welcome 😁
very very poor quality control over manufacturing of the wheel and spokes. I would never risk using them.
स्पॉक रिम कैफ़े रेसिंग कल्चर की "आत्मा" है, इसके बगैर किसी की भी कैफ़े रेसर बाइक अधूरी है. मै आपसे पूरी तरह सहमत हुँ और मै भी स्पॉक रिम ही प्रिफर करूँगा. Sir एक सवाल है प्लीज help me - मेरे पास GT 535 है, तो क्या ये आपके रिम मेरे बाइक पर फिट होंगे?
हाँ भाई होना तो चाहिए फिर भी में यही सजेस्ट करूँगा की एक बार इनसे बात कर लो यह इंस्टाग्राम मे हैं @dismotech. और एक बात इनको बनके आने में क़रीब २-३ महीने लग जाते हैं
This dismo guys are totally unprofessional, have ordered tubless rear wheel for 5 months now. They don't reply to your dms. All they say is ok sir, yes sir. Feels like I am scammed.
No you aren’t they will definitely send you the rims it just that they take a lot of time more than expected.