На этот раз неплохо, это еще б куда нешло, только болгарку и помощнее можно использовать, пусть и с оборотами будет чуть меньше, нестрашно, к примеру хотябы взять ту, которая используется под 180-ый диск.
Love the title.(Few people know about this function of the ANGLE GRINDER). It is not a function at all for the grinder, you modified it beyond any practical limits and are operating the saw part well beyond any safe speed a real chainsaw works at, those grinders work at around 10000 rpm's or more. I won't feel bad for this guy or anyone else who attempts this mindless modification and loses his hand, fingers and any other bodily part when the chain comes flying off.
I'm no fan of this either, however, speed is not an issue. Grinders work in the 10-12000 rpm range. Chainsaws work in the exact same range. MS250 has a top speed of 13,000 rpm. No kickback safety, no super secure way to hold it. An electric chainsaw that'd match this in power is not that expensive I wouldn't think, and you'll be safer when you use it, and have a greater chance of sleeping in your bed, not a hospital bed or grave. Worst part of the grave is that if you're not found in the righteousness of Christ, you'll end up in hell. Repent and believe the Gospel.
I have used this attachment. The chain becomes loose and comes of often. But can tell you it is safe if used properly after seeing demo videos. Unlike circular saw blade attachment for grinders this won't lock up or kick badly. Good for light works.
As a builder of chainsaws, I must say that I'm no fan of turning RA grinders, or any other tool for that matter into a chainsaw. The modern chainsaw, either in electric or gas engine versions, is a very carefully engineered tool delivering great cutting speed, safety, low vibration, safety, light weight, safety and ergonmics that can NEVER be matched by a DIY device. Even the cheapest consumer grade chainsaw will be better in every category (ESPECIALLY SAFETY) than this contraption, IMHO.
Да, инструменты, особенно режущие требуют жесткого соблюдения правил безопасности, конечности у человека не вырастают, поэтому лучше работать с техничнски заводскими инструментами, безопасность прежде всего ☝️☝️☝️
Просто автору некуда девать талант, как монетизация ролика огонь, стало скучно, потратил время с пользой, хорошо когда воображение развито отлично и руки золотые! Красавица!
A few years back, I was walking through Rural King noticed on the clearance rack there was a 16" Remington electric chainsaw (I guess someone bought it and then took it back). I think I paid $35 or so for it about half the price of a new one ( I checked before I bought it). It works great and is great for those little around the house projects and it easier than getting my gas saws out. The point is I gave you a thumbs up for building that saw, but, least for me, I think it better just to go buy one if you want one.
I went to Colorado once on a skiing holiday, they do have a lot chainsaws there, I have never seen so many one armed people in all my life, from garage attendants to receptionist. Using a chainsaw is a skill and everyone who intends to use one should take a safety course and use all the protective gear every time they fire the thing up. They are very unforgiving.
@Guy in Colorado, Greetings! , I agree, 100%.. There's no substitute for paying attention.. It seems to be a lost art, for too many people.. . People like to blame a product instead..
А ещё из шуруповёрта можно сделать миксер. А если к микроволновке приспособить компрессор, можно сделать мини-холодильник. Автор, жду воплощения моих идей
Let's see, $140 at the least for a welder and $40 for a ready made elect chainsaw with all the safety features. You're probably right. If I can afford to buy a $140 welder I can probably afford to get a $40 chainsaw that the only labor I need to put into it is taking it out of the packaging.
Se del manejo de motosierras. Y la verdad muy buena tu Idea y gracias por compartirlo. Esta muy practico para podar los arboles del hogar o hacer unas leña. Saludos desde Vilmer Santiago del Estero Argentina
У меня дома есть немка, англичанка и американка и они умеют тоже самое. Так что это умеет не только твоя болгарка но и другие иностранки. И даже русские. Русская у меня раньше была.
Yes not everyone has money laying around to do it the right way LOL. The "that's dangerous" thinking doesn't come until someone or something gets destroyed LOL.
Thank you - that made me laugh properly! I agree with Big Joe - you should have bumper stickers made up :) I half expect him to weld a car together around a washing machine next and call it a 'New' Function of...either of them.
Ждём видео приготовления борща в бачке унитаза.Название готово:"Мало кто знает об этой функции унитаза".И разливать удобно-тарелку подставил,кнопку нажал и..."Кушать подано,садитесь жрать,пожалуйста!"
@@edsnotgod I personally don't think that americans make better tools. But this particular craft lacks of the basic security, the chainbreak. If this person has a method to include that, would be awesome.
Я бы не стал этого делать. Нет хорошего хвата, может вырвать при заклинивании цепи. Вот на турбине с большими дисками и большей задней рукояткой может и сойдёт. За рацуху - респект!
У тебя в лесу и интернета нет ! И телевизора тоже . Да и диваны под кустами не стоят ... Тоже мне аргумент ! Для леса придумали бензопилы и другой бензоинструмент . А там где есть цивилизация проще и удобнее пользоваться электроинструментом !
Could be worse: Replace the 4-inch grinding disk with 10 inch circular saw disk. You have to, of course, remove the protector and the handle. I did it, just for the picture. But I would never turn it on. At 10,500 rpm...
@@west_park7993 My father used a 10 inch circular saw on a big grinder. He almos open his stomach using it. When the grinder went to his belly, he let the trigger go, and the disc cought the cable. He was lucky that time.
Muito criativo .mas pergunto ,será que a rotação e a potência é compatível com uma motosserra .pois se não for .pode limitar a durabilidade da ferramenta
ЕЕЕЕЕ, Браво, браво, страхотни идей, много хубав канал, отличен майстор, супер продукти, пак браво и респект от стара БГ. EEEEEE, Well done, well done, great ideas, very nice channel, excellent master, great products, again well done and respect from old BG.
Right... While cool if you desperately need a chainsaw and in a major pinch. 1 it won't last and 2 probly gonna take him out when it details at 10k rpm
The small tab on the bottom of the housing is a forehead depth gauge.When it kicks back this tab stops the chain from going too deep into your forehead.
Thanks for the wonderful joke. Glad I wasn't drinking something. In fact I'm going to engrave " do not use while reading leo kudej remarks" on all my cups and drinking glasses.
With a 5/8" arbor hole in it, and an oiler that might drip on the odd tooth, not in the bar channel where it belongs. If my wife were to catch me doing something like this, she'd call the men in the white coats. And I'd deserve it.
Por lo menos lo podía haber hecho con una amoladora grande y el guarda cadenas más ancho y cerrado...como se escape la cadena le va a costar un disgusto.te lo dice un motoserrista experimentado!
*Как вам функция болгарки? Не ожидали?*
Класс!
Полезная штука
Ничего нового
На этот раз неплохо, это еще б куда нешло, только болгарку и помощнее можно использовать, пусть и с оборотами будет чуть меньше, нестрашно, к примеру хотябы взять ту, которая используется под 180-ый диск.
Поменяй пожалуйста музыку ,аж до бливоты .... Каждое видео с одной и той же 🤢
У болгарки одна функция - вращение с большой скоростью. А всё, что на неё навешивается это приспособления. Кстати не всегда безопасные!
Руки правильно растут, но если они лишние, то как раз это чудо болгарка для этого...😂👍👍👍
Согласен на 1000%
Смазка офигенная 😀. Бестолковая идея
Бред полный
Точно((
Лишнее все это.каждая вещь имеет свое прямое назначение.дебилизм полный..на ишаках землю почему-то не пашут
Love the title.(Few people know about this function of the ANGLE GRINDER). It is not a function at all for the grinder, you modified it beyond any practical limits and are operating the saw part well beyond any safe speed a real chainsaw works at, those grinders work at around 10000 rpm's or more. I won't feel bad for this guy or anyone else who attempts this mindless modification and loses his hand, fingers and any other bodily part when the chain comes flying off.
I'm no fan of this either, however, speed is not an issue. Grinders work in the 10-12000 rpm range. Chainsaws work in the exact same range. MS250 has a top speed of 13,000 rpm. No kickback safety, no super secure way to hold it. An electric chainsaw that'd match this in power is not that expensive I wouldn't think, and you'll be safer when you use it, and have a greater chance of sleeping in your bed, not a hospital bed or grave. Worst part of the grave is that if you're not found in the righteousness of Christ, you'll end up in hell. Repent and believe the Gospel.
@@joev2223 👍 зачёт
Guaranteed to keep emergency rooms busy.
I have used this attachment. The chain becomes loose and comes of often. But can tell you it is safe if used properly after seeing demo videos. Unlike circular saw blade attachment for grinders this won't lock up or kick badly. Good for light works.
You are 1,000 % correct
As a builder of chainsaws, I must say that I'm no fan of turning RA grinders, or any other tool for that matter into a chainsaw. The modern chainsaw, either in electric or gas engine versions, is a very carefully engineered tool delivering great cutting speed, safety, low vibration, safety, light weight, safety and ergonmics that can NEVER be matched by a DIY device. Even the cheapest consumer grade chainsaw will be better in every category (ESPECIALLY SAFETY) than this contraption, IMHO.
Yo pienso lo mismo un peligro
Да, инструменты, особенно режущие требуют жесткого соблюдения правил безопасности, конечности у человека не вырастают, поэтому лучше работать с техничнски заводскими инструментами, безопасность прежде всего ☝️☝️☝️
I totally agree
❤❤❤🎉
Stupid
Parabéns,q top! Muito criativa essa idéia!👍🏾
Просто автору некуда девать талант, как монетизация ролика огонь, стало скучно, потратил время с пользой, хорошо когда воображение развито отлично и руки золотые! Красавица!
Проще купить электро пилу! Сохранишь здоровье!
Идеальная смазка цепи. Просто гениально. Автор так и до 100 лет не доживёт
Про 100 лет лишнее, а смазка просто гениальная хорошо, что не я один заметил.
A few years back, I was walking through Rural King noticed on the clearance rack there was a 16" Remington electric chainsaw (I guess someone bought it and then took it back). I think I paid $35 or so for it about half the price of a new one ( I checked before I bought it). It works great and is great for those little around the house projects and it easier than getting my gas saws out. The point is I gave you a thumbs up for building that saw, but, least for me, I think it better just to go buy one if you want one.
Also it has no kick back safety cut out. Scary.
Слабо из дрели сделать экскаватор?
Ис пулисоса уже сделали, вот.
Да! И назвать: Невиданные, неизведанные,засекреченные функции дрели, сука.............)
Или из шуруповерта авианосец сделать
Show de bola. Parabéns 👏👏👏👏👏👏
Show!!! top demais!!!! Excelente ideia e adaptação. Parabéns!!!
Essa gambiarra fez meu amigo perder dois dedos e parte do movimento da mão.
Crazy ,,, When that thing kicks back ,, someones going to the hospital ..
That's why he wears Kevlar Gloves.
@@KermitFrazierdotcom Ahh yes those gloves that protect your whole body.
@Guy in Colorado, Greetings! Guys! let's not joke!! its less costs to buy a chainsaw.And it's most safer! Greeting at all from Italy!!!!!!!!
I went to Colorado once on a skiing holiday, they do have a lot chainsaws there, I have never seen so many one armed people in all my life, from garage attendants to receptionist. Using a chainsaw is a skill and everyone who intends to use one should take a safety course and use all the protective gear every time they fire the thing up. They are very unforgiving.
@Guy in Colorado, Greetings! , I agree, 100%.. There's no substitute for paying attention.. It seems to be a lost art, for too many people.. . People like to blame a product instead..
Есть подходящая пословица. Дурная голова рукам....
А ещё из шуруповёрта можно сделать миксер. А если к микроволновке приспособить компрессор, можно сделать мини-холодильник. Автор, жду воплощения моих идей
Я, тоже недавно думал, а что если приспособить к шуруповерту миксер. Люблю гоголь-моголь. Как раз подойдёт шуруповерт😂😊😊😊
I'm gonna go out on a limb here and say if you own all of those other high dollar tools, chances are you already own a chainsaw.
That was punny
Or could afford one at the very least
Let's see, $140 at the least for a welder and $40 for a ready made elect chainsaw with all the safety features. You're probably right. If I can afford to buy a $140 welder I can probably afford to get a $40 chainsaw that the only labor I need to put into it is taking it out of the packaging.
Есть для этого бензопилы, у которых есть защита.
ОКЕЙ
Без тебя не знают.
А еще существует пила дружба 2!
Правельно, бензопила разчитана на такие работы
Muchas gracias por comprtir sus conocimientos, y su creatividad,es de mucho valor,ese invento,le saludo desde Tuluá Colombia.
Fantástico! Adorei a ideia!
Клёво, чо!! Особенно понравилась идея, что масло до цепи не успевает долететь. Его опилками прямо из носика и сдувает :)
Чё😄
Well there’s 8 mins of my life I’ll never get back
We are all searching for that needle in the haystack, aren't we?
С таким же успехом на турбинку диск по дереву поставь, а если честно с таким же успехом можно холодильник в лодку переделать🤭😂
Felicitaciones y gracias por compartir tus conocimientos 😘
Wait til next week when you find out that you didn't know your pogo stick functioned as a refrigerator.
Есть уже готовые приспособы продаются. Ну а за творчество зачёт, руки правильно растут
С такими "изобретениями" и кому он их сделает, скоро останутся без рук и голов!
Se del manejo de motosierras. Y la verdad muy buena tu Idea y gracias por compartirlo. Esta muy practico para podar los arboles del hogar o hacer unas leña. Saludos desde Vilmer Santiago del Estero Argentina
Que ingenioso invento y practico gracias por compartir.
Bonus Feature: Your body now doubles as the kickback brake.
Specifically, the face.
I was about to comment that same thing.
Хорошая текстура у вишни на рукояти ножей хорошо пойдет)))
Выписал приставку за 600 и пилю😂
У меня дома есть немка, англичанка и американка и они умеют тоже самое. Так что это умеет не только твоя болгарка но и другие иностранки. И даже русские. Русская у меня раньше была.
And after this you can be the best paralympic champion of all time.
Ya i showed this to my son... Son, dont do stupid sh#t you see on YT.
This guy got a grinder for Christmas when he wanted a chainsaw.
Спасибо..респект...from Tajikistan
Gostei da ideia, parabéns.
or you could get a chainsaw, they have all the necessary safety features to keep you safe.
and some for a very little price....
Absolute waste of time and energy to make a very dangerous tool...
@Jonh Ham yeah, the thing don't even have the proper sprocket to drive the chain.
Ещё можно перфоратор с болгарки сделать!
Yes not everyone has money laying around to do it the right way LOL. The "that's dangerous" thinking doesn't come until someone or something gets destroyed LOL.
Excelente invento hermano, usted es un genio, bendiciones.
У болгарки свои функции. А это просто кто во что горазд. Придумал - молодец
Que ideia linda!
Parabéns!
Essa gambiarra fez meu amigo perder dois dedos e parte do movimento da mão.
Когда не@уй делать- можно из велосипеда собрать санки!
Lourim aventura
Это точно
Ради подписоты
5 баллов ! :-)
Слов нет руки растут откуда нада но это .............! Столько прекрасных инструментов продаются. Ты прав когда не ху..........)!
There's bravery, there's knowledge, there's understanding.
Then there's you tube..
You should make that a bumper sticker or T shirts. Laughed till I had an asthma attack 😊
I was waiting to see the word stupidity show up in this sentence.
Thank you - that made me laugh properly!
I agree with Big Joe - you should have bumper stickers made up :)
I half expect him to weld a car together around a washing machine next and call it a 'New' Function of...either of them.
Muito bom. Parabéns.
Из болгарки можно и велосипед сделать и возить с собой трансформатор, чтоб питать её от 220в,как вам идея для следующего выпуска?
Ну,да. Тезнически, но, может быть и толковый, но...................короче)
Ждём видео приготовления борща в бачке унитаза.Название готово:"Мало кто знает об этой функции унитаза".И разливать удобно-тарелку подставил,кнопку нажал и..."Кушать подано,садитесь жрать,пожалуйста!"
Кушать подано. Садитесь срать.
😂😂😂
Ха хаааа
Попил квасу из бачка и блины потом будут(прапорщик задов)
A: why does Google translate Borsch with a T at the end. B: I'm sure it's been done.
Clever method to remove those pesky fingers that always get in the way...
Or that anoying head...
Rest assured that could never happen to American master craftspersons with their oh so superior tools and skills necer
one false move and then you would need someone elses fingers to count to ten.
@@edsnotgod thats true.
@@edsnotgod I personally don't think that americans make better tools. But this particular craft lacks of the basic security, the chainbreak. If this person has a method to include that, would be awesome.
Я бы не стал этого делать. Нет хорошего хвата, может вырвать при заклинивании цепи. Вот на турбине с большими дисками и большей задней рукояткой может и сойдёт. За рацуху - респект!
Espectacular maestro felicitaciones.
I used the function where it gives you the option to put your hand in your pocket and actually buy a chainsaw that is fit for the job. Amazing! 🤦♂️
:-) Yes, while you still have a hand to put in your pocket. You might not if you used this reckless invention.
Nice "function". Almost as cool as the function of my car where I remove the entire front, start it up, and use the fan to cool myself off!
Best answer!
Ha Haaaaaaaaaaaa! 😆
LOL!!!!
Now drive it through your wall and it’s a window fan!
@@soopahjj11 "New LIFE HACK for in-home A/C!"
Boa.noite meu amigo parabéns pêlo seu trabalho
Это не функция болгарки, это инструкция как покалечить себя. Жду видео как из пилы сделать болгарку
Хорошая идея. Нужно себе такую сделать. У нас в лесу под каждым кустом резетка 220В.
Во 👍 разсмешил... Ржал
Для дома сойдёт!
И даже 127 вольт
Эта задумка не для леса, большенстао люду, дома пилят.
У тебя в лесу и интернета нет ! И телевизора тоже . Да и диваны под кустами не стоят ... Тоже мне аргумент ! Для леса придумали бензопилы и другой бензоинструмент . А там где есть цивилизация проще и удобнее пользоваться электроинструментом !
Супер респект.
Доктор Дью был уже здесь?? Позовите его пожалуйста!
Why should I buy a safe and powerful chainsaw when I can buy a grinder and, with only 3 days of work, transform it in a dangerous and weak chainsaw?
AND that chain adjustment is so tite yo
and so FEW know about it! lol
Because it’s dangerous and that is how we we like it. It is our nature to be attracted to dangerous things .
⚰️👀😂
AND they make ones that run on electricity ................AND batteries too. When in Russia......Safety Second .
That's a bit like converting a Forest master wood chipper into a Kenwood chef food processor and letting your wife use it to make cookies.
Thanks for the great idea... my next project
Молодец ты супер. Восхищаюс такими людми как ты нет слов. УРрррраааа.
Excelente, una maravilla 😲😲😲👍👍👍👍👍👏👏👏👏👏
"Мало кто знает об этой функции БОЛГАРКИ !!!" - это приблуда, а не функция! Называй вещи своими именами.
ЭТО БЛУД А НЕ ПРИБЛУДА !!!! МОЩНОСТИ ЭТОЙ БОЛГАРКИ НЕДОСТАТОЧНО ДЛЯ ПИЛА И ОБОРОТЫ НЕПОДХОДЯЩИЕ !!! ЭТО ФЕЙК , ЛАЖА , ЗАЛИПУХА !!!!
На самом деле'что за название ролика!??
посмотрите мой канал если нравиться подпишитесь пожалуйста czcams.com/channels/6mvqw0k3A2EbIGiB3I99UA.html впереди ещё много интересного.
А мало кто знает про неё видимо потому что ,мало кто после повторения сея шедевра выживает 🤣🤣🤣🤣🤣
Пойду из велосипеда мотоцикл делать.
Realmente me sorprendiste, felicitaciones, un abrazo enorme desde Argentina 🇦🇷
Buena creatividad,pero ya los chinos la venden,aquí en chile yo compré esa pieza y por 17 dólares,la acople a mi amoladora,y funciona muy bien
Vc e um gênio mestre Parabéns.
Супер!
Never seen someting more dangerous! 😱
Haven't been around much have you?
oh ya my wife on pms would make this look safe,navy seals and brit sas run for their lives
Could be worse: Replace the 4-inch grinding disk with 10 inch circular saw disk. You have to, of course, remove the protector and the handle. I did it, just for the picture. But I would never turn it on. At 10,500 rpm...
@@west_park7993 it scares me to death!
@@west_park7993 My father used a 10 inch circular saw on a big grinder. He almos open his stomach using it. When the grinder went to his belly, he let the trigger go, and the disc cought the cable. He was lucky that time.
"which branch should i cut, ohh this one right next to this power cable" lol
Just buy them chainsaw
Походу мало кто знает про настоящую пилу,без сверла и сварки.😂
Muito bom parabéns 👏👏👏
А из электропилы будет шлифмашинка ,гениально.
Спасибо за идею
Блин я тоже самое хотел написать!!🤣🤣
Well, there went the last 10 minutes of my dinner break! 🥺
Раньше телепередача была «очумелые ручки»😂😂😂
Well done, future one-armed man!!!
Это как велосипед с квадратными колесами,а чё - можно по шпалам ездить😆😆😆
Это из разряда - в клубе исторической реконструкции: Одевай латы средневекового рыцаря и вперед, лес пилить!
Nice job but i'm trying to figure out what keeps the chain drive gear from slipping on the drive bolt of the grinder??
ECONOMICO E FUNCIONAL PARA SERVIÇOS DOMESTICO. PARABÉNS!!
Muito criativo .mas pergunto ,será que a rotação e a potência é compatível com uma motosserra .pois se não for .pode limitar a durabilidade da ferramenta
Oh that’s what my angle grinder does! Silly me! All this time I thought a chainsaw did this!
FANTASTICA IDEA. GRACIAS POR COMPARTIR,TAN EXCELENTE VIDEO. SIGUE COSECHANDO EXITO.ATTE.MOY.
No thanks, i want my hands safe 🤣🤣🤣
Fully agree with you, Mauricio, you might just loose your hand or hands then you can't use your other safety made equipment or tools. 🖐️
@@karelgericke3858 I'm agree with you guys!!!!!
Few people know about this "function" of the angle grinder because most of the ones who knew are already dead.
Hahahahh that made me laugh
..... deaths with atrocious suffering.....
Caramba piá, uma ideia genial 👏👏👏👏
Gostei , muito proveitoso. Onde posso comprar a corrente com a guia da corrente?????
Não sei falar essa língua, mas o que eu tenho a dizer: Simplesmente magníiiifico, parabéns, gênio!!! 👏👏👏☺👍
Essa gambiarra fez meu amigo perder dois dedos e parte do movimento da mão.
Wow! A home made leg/arm/head remover! Wow I gotta make one...
Yep , how cool is that ???
Покупаем электро пилу, снимаем с неё мотор, делаем приблуду на болгарку и вуаля. Особенно понравилась масленка для смазки полотна😂
ЕЕЕЕЕ, Браво, браво, страхотни идей, много хубав канал, отличен майстор, супер продукти, пак браво и респект от стара БГ.
EEEEEE, Well done, well done, great ideas, very nice channel, excellent master, great products, again well done and respect from old BG.
"Few people know about this function of the angle grinder" Good thing!!!
top sanks
! ! !
Indeed.
Just silly and dangerous.
Right... While cool if you desperately need a chainsaw and in a major pinch. 1 it won't last and 2 probly gonna take him out when it details at 10k rpm
Title should have been "Of the people who know about this function of the angle grinder, few are still alive"
Damn, I just turned my chainsaw into a grinder.
Now that is funny ......
Did you play the video backwards?
BawhhhHahahah
😂😂😂L O f$cking L
Покажи еще как из плойки сделать фен,из велосипеда самокат,из машины мотоцикл.Очень полезно!!!
А блендером можно траву между цветов подстригать....
Excelente trabajo lo felicito 👍👌
Да это бред черер час шина сгорит. Масло 🛢 в нутри шины заходит. А эту каплю здует нахер.
после "бред" -запятая....череЗ , а не "череР"...
Не сгорит шина, потому что час работы с этой приблудой болгарка не выдержит
@@user-oi2gh2yr7v Молодец, поднял свою самооценку.
Few people know about that function you sure got me there smart guy
lol, its more like "no people" know that function....
So good adaptation...!!
Thank you for show us...
La meule , le matos et le temps passer !!!! Vas t'acheter une tronçonneuse électrique !!!! 😂 😂 😂 😂
The small tab on the bottom of the housing is a forehead depth gauge.When it kicks back this tab stops the chain from going too deep into your forehead.
Thanks for the wonderful joke. Glad I wasn't drinking something. In fact I'm going to engrave " do not use while reading leo kudej remarks" on all my cups and drinking glasses.
OH Leo don't be too Rough on the GUY Too FUNNY !!!
Yup, everybody has a few chainsaw drive sprockets just laying.
With a 5/8" arbor hole in it, and an oiler that might drip on the odd tooth, not in the bar channel where it belongs. If my wife were to catch me doing something like this, she'd call the men in the white coats. And I'd deserve it.
Ese invento esta super me gusto lo voy a intentar saludos desde Venezuela 🇻🇪
Buen invento, puedes patentarlo y ponerle de nombre motosierra, seguro que no se le ocurrió inventarlo a nadie eres un maquina
I could probably make one, but I don't think I could bring myself to actually use it.
Ya está inventada y más segura ... se llama una “moto sierra”
Por lo menos lo podía haber hecho con una amoladora grande y el guarda cadenas más ancho y cerrado...como se escape la cadena le va a costar un disgusto.te lo dice un motoserrista experimentado!
Camicase el señor yo lo pensaría 3 veces.. en fin..y no es una función de la amoladora es un "invento" suyo
Larga de ser fresco
jajajajaajajajajajajajajaja
9 minutos de mi vida perdidos en este video