How to Fix a Printer Copier that Won't Feed Paper - Brother MFC-L6800DW Paper Feed DIY with Rubber
Vložit
- čas přidán 4. 06. 2022
- My printer stopped feeding paper into the copier/scanner paper feed. It turns out that a small rubber piece fell off the paper roller assembly of my Brother MFC L-6800DW. Rather than replacing the roller assembly, I attempted a fix using rubber band material glued to the roller assembly. The rubber material provided the grip needed to allow the printer to function once again. Should the problem occur again, I can always order a new assembly. This DIY fix, though, required only 10 minutes, one rubber band, and a few dabs of super glue. I fully expect this fix will outlast the remaining life of the printer.
Amazon rubber bands:
amzn.to/49psZ7Z
Amazon super glue:
amzn.to/4bPowNk
Attach phone holder to windshield with magnet (NEOS):
amzn.to/3yMJfCs - Auta a dopravní prostředky
Thank you it wasn’t the rubber piece, there was a staple stuck in it. But thanks for giving me the confidence to dig in.
Just saved me $659 dollars and a happy staff. Thank you
We fixed the office printer. Thank you very much
😁
Fixed the office printer in a jiffy. Thanks!
Awesome. Fixed my fax. Kudos to you.
Good Job Brather
thank you very much for this advice I did exact your way and my machine work excellent thank you again.
This video saved me 100s of dollars on a replacement printer. Thank you!
Thank you! Fixed my machine!! 🎉
Glad it helped!
This worked!!!
I have a different issue. My rollers have come off on one side. The paper gets hung up on left side only. I need help pleasre!
Where can you buy the assembly?
I pulled my assembly out and my rubber piece was still good. Put back and ADF still jams. Any suggestions?
I noticed a small lip on that plastic assembly. Maybe your rubber piece is not thick enough to allow the paper to move over that lip? If so, you may still need to replace the rubber with a thicker piece.
I from Aceh Indonesia