MG FREEDOM GUNDAM 2.0 Ver. Fast Build Up (MG 프리덤 건담 2.0 버전 빠른 조립 리뷰, MG フリーダムガンダム Ver.2.0 1/100)
Vložit
- čas přidán 13. 09. 2024
- Buy▶ amzn.to/2xp4Wbf
구매하기▶ amzn.to/2xp4Wbf
Fast Build Up Video for MG FREEDOM GUNDAM 2.0 Ver. (MG 프리덤 건담 2.0 버전의 빠른 조립 영상)
Facebook: / builderstv
Subscribe: czcams.com/users/sub...
One of ZAFT's ZGMF-X series of Gundam units build in CE 71 using technology derived from the four captured Alliance's Gundam, the Freedom Gundam has Phase Shift Armor and is primarily armed with powerful ranged weapons. Its armaments includes CIWS guns, beam sabers, shield, plasma beam cannons, rail cannons, and a beam rifle; when the latter three weapons are used at once, the Freedom is said to be in 'Full Burst Mode'. The suit has full flight capabilities in the atmosphere and the back-mounted wings can be deployed in "High Mobility Aerial Tactics (HiMAT) Mode" to enhance its mobility in the atmosphere or in space. It also has an advanced targeting system, the Multi Lock-On System, that allows it to target and fire at multiple enemy units simultaneously. Furthermore, the suit can dock with a support unit, the METEOR unit, for heavier firepower and greater speed. The Freedom Gundam is designed to be operated alongside the ZGMF-X09A Justice Gundam and for this purpose, the warship Eternal is designed specifically to maintain both suits. (Ref. wiki)
본디 자프트에서 개발하고있던 핵엔진 탑재 모빌슈트중 하나로, 초기 GAT-X 5기에 플랜트 수뇌부가 자극받은뒤 강경파인 패트릭 자라를 필두로 내츄럴과의 전쟁의 판도를 바꾸고자 준비한 원 오프 타입의 결전형 모빌슈트.
개발을 위해 플랜트 마이우스에 위치한 3개의 주요 모빌슈트 설계국인 하인라인 설계국과 아시모프 설계국, 클라크 설계국을 끌어들여 사실상 하나의 설계국으로 통합시켰다.[1] 그리고 게이츠의 개발과 각종 빔 병기의 실용화를 주도했던 마이우스 밀리터리 인더스트리社와 병기제조 전문 기업인 마티우스 아세나리社, 우주함선을 전문으로 개발해온 베른 설계국까지 동원했다. 이렇듯 자프트의 기술진들이 총동원되었음은 물론 개발비용도 고려치 않을 정도로 총력을 기울여 제작된 기체다.
GAT-X 시리즈로부터 얻은 기술력을 전격 도입하는 한편, 신기술들의 도입으로 기존 모빌슈트 동력으로는 제대로 충당되지않자 N 재머 캔슬러까지 도입해 금기시되고있던 핵동력까지 탑재하는 등, 개발당시로서는 그야말로 최강의 성능을 지니고 있었다. 뉴트론 재머에 의해 죽어버린 핵동력의 부활과 뉴트론 재머 캔슬러의 탑재, 고출력의 핵 에너지를 바탕으로, 다수의 빔 병기를 통한 최강의 공격력과 페이즈 시프트 장갑으로 대표되는 최강의 방어력을 동시에 가졌으면서 우주와 지상, 공중 모든 지형에서 운용할 수 있는 전천후 만능기(출처: 위키)
BGM list
Vanishing_Horizon_Audionautix의 Vanishing Horizon
Get_A_Move_On_아티스트_httpaudionautix.com Forever_Believe_Audionautix의 Forever Believe
How's this video? Please, leave your opinion about the video ^^
best video yet. great filming and posing. pre-ordered this kit. so excited. the model looks sturdy
Fantastic video :D You are a great model builder!
its good man its good i should say
and funny
+Sample Text really thanks
+김시윤 MG 풀아머 썬더볼트 버전을 비롯해서 추후에 나오는 MG는 모두 갑니다. 걱정하지않으셔도 좋습니다 ㅋㅋ
이번 영상도 재밌었나요? 어떤 부분이 재밌었는지 의견 남겨주세요 ^^
꾸루잼꾸루잼
먹선 넣으실때 뭐 넣고 하고 멀로 지우나요?
머리 조립 들어갈때 배트맨 가면 쓰고 머리 조립 하는곳 표현 하는데 가 가장 웃김ㅋㅋ
+황선빈 대신 답변
죄송 에나멜먹선 지우는건 에나멜 신러? 맞나?
+장장민제 소중한 의견 감사합니다. ㅎ
This ended up being my first master grade and my second gunpla build overall. Haven’t panel lined or apply decals yet, but I’m very happy at how wonderful it was after snapping it together
Does it come with the base/stand?
@@wack2904 yeah it does actually
@@wack2904 yeah
How long has the leg pegs and the waist peg held up brother?
@@thomasdeen2099 mines is holding up well
I'm brand new to Gunpla, and I'm waiting on this kit to show up so I can start building. At first when you opened that box and there were soooo many parts trays I'll admit I was feeling overwhelmed. But watching you piece it all together got me super excited to get to working on mine once it gets here.
You probably should have started with a simpler kit such as a hg, but this is a fun build
Jesus!....It even has cannons on the wings....
10/10 would rate
스트라이크 프리덤 rg건담도 만들어주세요^^
as a gunpla builder, i gotta say that the fact that he had all his pieces cut out before he started putting them together, helped his speed. cutting the pieces out, and cleaning them up takes the longest.
For me it's always been eye stickers. I have a slight case of OCD so it gets really annoying to line up the eye stickers with the eye piece
Steven Tarsitano For me it's the decals. I recently got a RX-93 gundam MG, and it had a water slide decal so big, I said fuck it, I'm too lazy.
because of this video I want to build gunpla again.
Josh Panton Why don't you find a cheap good HG? I recommend Barbatos Lupus or the Gusion rebake HG.
King Midas try the astaroth origin
Josh Panton GUNPLA IS FOR EVERYONE
@CasperMelchiorBalthasar Maybe because the ones you listed are way too complicated for beginners?
@CasperMelchiorBalthasar Mine too, but others may have other skill levels.
(P.S. it was the MG 00 Raiser)
It's very entertaining and a very interesting gunpla. Do you by any chance have the water slides decal?
I have this kit and it is AMAZING! Nice articulation and strong joints and Super fun to pose because you have so much freedom in articulation with this kit and it's shelf presence is amazing as well. One of my favorite gunpla kits in my collection.
혹시 베이스 부속 되어있나요?
Can’t wait to build this got the last one in stock on amazon!!!! Lovely build
형 영상보고 프리덤2.0 샀습니다. 새로운 영상이 많이 올라왔으면 좋겠지만 지금 있는 영상들 여러번 보는것도 재미있네요. 편집도 너무 잘하시고 영상 찍어주셔서 감사합니다.
It so beautiful
Do you have tallgeese?
Very impressive! I like how good you are in putting in the decals! Subbed!
Oh wow, MG building looks like fun!
Lewis Hammond it dose but it’s a pain
I took 1 day to built MG or 1/100 scale gunpla during school holiday.
animefan 1979 During holiday ?
ilove frreeddoomm gundammm
i want to you build gundam MG aile Strike LOL just want watch.. and this video nice. i like it. :)
Will you review the mg infinite justice gundam?
+Harambe The Filthy One no I'm focusing on new released products.
Oh okay, but will review the hyaku shiki and astaroth origin?
가동률이요 그게 최고에요
I can't decide on which Gunpla set to get, I want the Justice and Freedom but I can only get one.. :((
I bought all the hundan build able collectables thnx 2 u. Now I am Fascinated by the Gundam series.
Cant wait to build this. I love the freedom gundam
잘봤습니다!그런데 고관절 부위는 특별한 작업을 하신건가요?
자주 부러진다는 말을 듣고 작업하기가 조심스러워서 박싱상태로 두고 있네요 ㅠㅠ
So satisfied watching this so details this gundm
There are some things in this world that I will never understand. The identity of BUILDERs TV is one of them.
Hope to see MG strike freedom..
쓰리덤 살려다가 프리덤 샀습니다^^ 퀄리티 넘 차이나서 프리덤 ㅎㅎ 최고
I am new to building gundams and will build my first after it arrives. What were those liquids that he applied to the Gundam? and do I have to?
你能说中文吗?
Ill tell you this. You have gotten me through time and time again inbetween gunpla builds. Got no money got gunpla.
첫mg군요.ㅎ mg라 그런지 영상도 볼륨이 더 풍성해진거 같아요 잘보고 갑니다!
+momo ㅋㅋㅋ 앞으로도 MG는 쭉쭉갑니다 ㅋㅋ
Thank for you sharing. I have no experience of building up a figure. And I really like design of the freedom… just like a bird frying in a sky without any bounds!😁
Bird frying?
프리덤!!!!~~ 뱃맨 가면 너무 잘어울리시네요 ㅎㅎ
+채소골렘(vegetable Golem) ㅋㅋㅋㅋ 감사합니다. ㅋㅋ
+BUILDERs TV 프리덤 2.0 손이 잘빠지나요?? 그리고 손 엄지 손가락만 가동 하잖아요. 그럼 끼우는 부분이 잘빠지나요????
+우현승 제 경험상으론 그리 잘 빠진다는 느낌 못 느꼈습니다 ㅋ
빌더즈님의 최애건(최고로 애정하는 건담)은 건담seed MG프리덤 인가요 ㅋㅋㅋ 저도 꼭 사야겠어요^^~~ 조립 영상 감사합니다. 수고 많으셨어요 ㅎㅎ
당연히 포즈 잡을때가 가장 좋져 ㅎㅎ. 그나저나 이거 만드시느라 한동안 영상을 못 올리셨던 거군요!
+하이루 하하 알아주시니 감사합니다 ㅋㅋ
역시2.0
처음 만든 MG 비록 도색도 안하고 데칼 작업도 안했지만 장식장에서 멋진 포즈를 빛내는 프리덤!!! 보여 드리고 싶네요 ㅎㅎ 건담은 포즈인듯 ㅋㅋ
맞아요. 아무리 멋진 건담이라도 포즈를 엉성하게 진열하면 화가 날려고함.
역시 실력 짱~!
+나초승달 별말씀을 ㅋㅋ
amazing... very high quality kit even straight out of the box built
+SrykerJlt Thanks!! It'll be great joy for you!!
Did you even looked at the instruction manual? Man, you're good!
Arman Zakariah he probably did just not during when he showed assembling it
great vid! subscribed!
멋지네요 저 이거살건데 공부 많이 됫습니다 감사합니다^^
+김정우 도움이 됐다니 다행이네요 ㅋ
awwwww yussssss. best kit ever. thanks for your build made everything look even better
i love your style . keep it up mate, you will get 500k subs one day .you can and u will do it
+Jeremy Dias Really thanks for your cheering!!
OMG finally FREEDOOOMMMM!
+Madara Uchiha Yes, it is!!! Thanks to watch!!
+BUILDERs TV do you recommend this kit for beginner?
Best way to review Gunpla yet :D Subscribed!
+benny lee Thank you bro!!
builders tv are very cool...i like your videos
I WANT ONE!!! :) nice vids!!
i want to see the box art that would be awesome
what scars me about this kit when i got it was the new joint in the leg it was not that tight and it might break like soke reviews said
Someone told me to sand it so it will not be too tight
We have to be careful on that J4 parts
Buy the metal part or order entire metal frame.
@@harryharold1049 i dont think there is an entire metal framr of thid considering because of the build it had no full inner frame and i think there will be metal parts for the hip joints
I miss these kind of uploads from you, these are still my favorite channel for gunpla video’s
I love your video~
역시 프리덤 2.0 20분동안 시간가는줄도 모르고 열심히봤네요
어서 코팅판이 도착했으면 좋겠다 ㅠㅠ
+Jhon Doe 즐겁게 손맛 즐기시길 바래요 ㅋ
Fantastic!! I gonna start to make my own soon...
i swear the wings on the RG version of the freedom alone drove me crazy but its such a great model
What's the brand of your tweezers?
justice gundam mg!!!!
님제발 빌드스트라이크 풀팩키지 mg해주세요..
great video, loved the thigh slap before you built the legs lol
+langlest lol thanks ^^
TBH the only thing that I like the most is those skirts that turn into guns, that's dope.
Watching you build has made me want to go back and build all the kits I stockpiled can you tell me the brand for the enamel you use and where I can get the tamiya panel liner ?
이거역시 몰드가 대박이죠 저도 조립했습니다
+류준식 역시!
이거 다리가 파손 위험이 있다는데 괜찮을까요?
I very like your video that build a gundam
와.....멋있어요
+띤떠 유튜브 감사합니다. ㅋㅋ
역시 키라보살님기체는 멋잇어ㅋㅋ
+앙코르 ㅋㅋㅋ
do u use cement?
먹선을 다크그레이로 해도 괜찮을까요
Love the video just wondering I a fan of freedom gundam said and would this be a good gun as my first one or should I try a different freedom gundam
Ops didn't mean gun I meant gundam
프리덤 2.0 건식이 없고 테트론씰만 있는 건가요??
좋아요!
So this takes how long in real-time?
Nice!
what top coat did you use?semi gloss or matte?
Great job. Iam buying this one. Yeah
where do you get that stuff for the panel lines?
hobby market or online i think
편집하시기 겁나 힘드실듯 ㅋㅋㅋㅋ 영상 재밌어요 앞으로도 계속 올려주세요 ㅎㅎ
ㅋㅋㅋㅋ 항상 배트맨가면 쓰고 해주시는부분이 재밌네요~ 저번에 구매하러 가신것 보여주신것도 정말 특이하고 재밌었는데 ㅎㅎ 항상 즐겁게 잘보고있습니다! 프리덤건담도 멋지네요!
+부리의취미생활 하하 좀더 재밌게 만들게요 ㅋㅋ 감사합니다.
BUILDERs TV ㅋㅋㅋㅋ 지금도 충분히 많이 재밌게 잘보고있는대요~ 항상 잠들기전 조립실황영상 보면서 잠듭니다 ㅎㅎ 암유발 조립영상 ㅋㅋㅋ 항상 응원합니다! 좋은영상 올려주시는것 감사하구요~
U just use your nail to made the dry transfer.... I will follow ur step...... Good video bro...
Damn....definitely need to get this kit 👍
10/10 The best MG there is :D
와우! 조립이나 데칼 붙이는거나 정말 넘 완벽 하네요. 완전히 환상적이네요. ^^ 근데 조립 하시는 분 한국사람 맞나요?
+박성천 네 ㅎ 맞습니다 ㅋㅋ
Very amazing!
Hi, thank you for the video! It taught me a lot about gunpla building. May I know is there any tips on when should I use the Tamiya Panel Line Accent & when should I use the Gundam Markers? I saw that you used both in this video and only the Panel Line Accent on some other videos. Thanks first for the tips!
Have you had any troubles with the hip joints so far? I have the mg Providence and the hip joints aren’t the strongest
very impressive work with this one =) mine is not near this good looking that yours are =)
what tape are you using?
Please Review MG WING PROTO ZERO
I really like these fast build-ups--plus the music is COOL! This video helped me to decide to get this kit. I have a 1/60 sacle 1.0 from 5 or 6 years ago. All the new details are amazing. Thanks for the post!
프리덤 2.0 고관절 파손율이 높다고 하던데 어떤가요???
thanks buildersTV,you have any tips on building this gundam?and this is a great video
A bit late but watch out for the variable hips. They can break if you're too rough with the posing
만들부위를 자신의 몸으로 표현한게 웃기고 재밋네요 앞으로도 멎진건담 많이 만들어주세요
The connections from the shoulder to the bicep looks very similar to the HG setup (my HG kits arms broke at that peg) are those pegs fragile? If so are there any ways to strengthen them or replace them.
다멋있다
안녕하세여 스트라이크 프리덤 만드셧네요 저는 스트라이크 프리덤 mg살거에욬ㅋㅋ
Do you use gloss topcoat?
Great kit, job and video! Thanks!!!
+Bratishkavideo Thank you!! ^^
제미있게잘봤습니다
What kind of top coat did you used bro? I just bought my own Freedom 2.0 too wkwkw
How long do i have to wait to use the enamel thinner after applying the tamiya accent panel paint?
Hour maybe less
Ooooh, I want that RG Raiser....