SHINY SOLID HK22+?! | Radical Breakaway
Vložit
- čas přidán 15. 01. 2024
- A benchmark ball is typically one you can control on a lot of different lane conditions. There is one very important metric you need to pay attention to when looking at the SPECTO data when considering a benchmark ball and that is the Impact Angle vs. the Entry Angle. When the Impact Angle is very close to or lower than the Entry Angle, the ball is very smooth on the backend and is rolling forward as it enters the pocket. This is a control ball and exactly what you want in a benchmark bowling ball.
🚨🚨🚨BRAND NEW BRUNSNICK MERCH!🚨🚨🚨
I have collaborated with Inside Bowling to design some t-shirts and here they are! Sport some OG BrunsNick gear, check out the link!
www.insidebowling.com/collect...
With the help of SPECTO data, it'll help tell the story about reaction shape, overall hook and continuation through the pins. Here are the SPECTO data points used and definition of each term:
Launch Speed - Speed measured off the hand.
Entry Speed - Speed measured at the pins. (What you'd see on your home center MPH screens)
Rev Rate - Revolutions Per Minute (RPM)
Launch Angle - The angle the ball traveled the first 10 feet.
Break Point Position - Board at which the ball was at its outermost position.
Total Hook - Total number of boards the ball crosses on the way to the pins.
Hook Power - Number of boards the ball hooked based on the True Breakpoint.
Entry Angle - The angle of the ball between 51 and 55 feet.
Impact Angle - The angle of the ball between 57 and 59.5 feet.
Pin Deck Exit - Ball position at the end of the pin deck.
Questions? Comments? Did you order one after seeing this video? Let me know! I read all the comments and respond to many!
#RadicalBowling #RadicalBreakaway #BowlingTips - Sport
Damn…first shot out the gate, and Nick gets the Randy Pedersen treatment…😂🤣
On a more serious note, that Break Away looks sick. Radical coming out with that _heat!_
Another great review, and an awesome looking bowling ball.
Loved this core in the Payback!! Just ordered one of these for my Dad, so he can stop using my Payback 🤣🤣🤣
That’s a dynamite plan 😁
Radical Breakaway! Looks like another good ball.
Very entertaining and informative, BrunsNick!
wish you could do cross brand comparisons. Would enjoy seeing this vs the Radioactive Vibe.
it being a solid it makes me wonder how much of that angle it would retain with 2 or 3k applied .. Great review and some good shooting.
Not sure if you want to do a comparison with this ball, but the radioactive vibe has similar core numbers, and is also a solid with hk22 and compound finish, just like this ball
opposite of the Payback
Payback: Dull, Pearl, pre-HK22
Break away: Shiny, solid, HK22
I’m liking the look of this ball. I’m currently using a GB4 hybrid a lot and liking it. How does the ball compare with the Pandemonium Pearl or Intel Pearl? Both are in my collection and have been used often. I could definitely have some success with this one.
Mitch Hupe made the Break Away look insane during his review on the JR Pro Shop channel.
The shot just past four minutes in was insane!!
Pre-ordered the break away and BW 3.0. My first HK22 experience was with Tundra Fire and since then my arsenal is nothing but HK22. Happy to be back to Brunswick. Nick, is there anyway you can convince them to remake the OG Melee Jab with HK22 and/or NeXXus f(P+R)/ Nexus f(P) with HK22? 😆😆😆
I can surely try!
@@brunsnickI’d like to see the Total Inferno with HK22
Hi! I think you mentioned in a previous video that all coverstocks/base (Solid, Hybrid, Pearl) are the same and the difference between them is determined by the amount of powdered Pearl additive? And that ball manufacturers used to use a liquid pearl additive but the manufacturers of the liquid pearl additive raised the price of the additive so much that ball manufacturers went back to using the older powdered pearl additive. If there's a source/document of that information, I'd enjoy reading it. Thanks for all that you do for us with your ball and bowling accessories reviews!
I don’t recall saying that.
I agree with taking the shine off thia ball. Personally as a high rev guy im probably going up to a 3000 wet sand
Just need an HK22 GB2 Hybrid now!
Old Brunswick anvil lanes and they hook a lot
Hey Nick, i was wondering how you might compare this to the Raw Hammer Hybrid. Truthfully, i have no need for a new ball, but i can’t help myself in at least experiencing as many as possible. (my shop is hosting a bowl fest including this and many others including the ultimate defender.) I guess my question is- would either of those, if it all, have a similar motion to the raw hammer hybrid? Thanks, love your content!
This was quite a lot stronger than the RAW Hammer Hybrid thanks to the coverstock strength.
Man, Radical made a huge "breakaway" with this ball.
Never really wanted radical equipment. But after this release I WANT one I think I need it 🙂
Never had Radical bowling balls in my bag, but now I can’t decide between this, the Zigzag, and the Katana Strike.
The Katana Strike for sure.
Cool video talk tech bowling ball radical breakaway with dynamic core technology in the bowling ball more strike and spares hitting power at time brunsnick
Cool video talk tech bowling ball
Love the videos
Most informative out there
How does this compare to the Crypto
The numbers are a bit different but hk22+ might make a bigger difference than a couple of points in Diff and RG
Be good to hear your thoughts
This is cleaner and more angular than crypto. That was much smoother for me.
Curious how this matches up the the Hammer Radioactive, very similar shot shape from what I have seen.
I see it smoother. The Radioactive is crazy strong off the spot.
Forgot to mention, I have a #14 Break Away on order.
Bro you 8 pin on command lol. It’s impressive actually!
I’m getting shirts made lol
Hello nick I’m a slower ball speed 15 miles per hour and 450 revolutions do you think it would be a good ball for me
If you’re 15mph at the pins absolutely it’ll be good.
Might be a good one for me I have the payback and shot 299-815 with it
Awesome! Maybe it’ll be 300/816 this time
Nick I have the solid rattler and seeing this ball looks like they compliment each other. Thinking of short pin rattler, pin up break away. I'm a low speed/low rev player. Appreciate any comments , Mahalo MJ
Could work, the Breakaway will be quite bit stronger most likely.
@brunsnick thank you for the reply Nick. Can't wait for the break.
At 1:29 you left an 8 pin because you came into the pocket late and high.
That looks like a Fireball replacement!!!!!! Ya think lol?
No not really. Quite a bit stronger cover.
Is the Entry Speed the same as the speed at the monitors on the bowling center?
No. My house has the speed at the sweep so it's closer to entry speed. Other places I'm about 1.5 miles fast due to them being by the cameras. I wish we had a speedometer near the arrows. It would be the most consistent.
Joe, yes. Entry speed is what you would see at the pins on your scoring screens at home.
Do people ever say this ball sucks….. no every ball is great
While not every ball will be good for everyone, I can relate what I see and communicate that in my reviews. Some balls are better for me playing straight, other better playing in.
How does this compare to the Track Sensor Solid, which I just ordered?
Cleaner than that, more backend.
Is there any rules to understand how the post drilling numbers change from smaller to larger pin to pap lengths and val angles?
A lot of variables there but it all comes down to where the mass is being taken out of a given core to how it affects after drilling numbers.
@brunsnick that makes sense. The more you take away from a given part of the core you increase rg or diff and creat intermediate. So post drilling number really are as much about core shape as it is layout. Got it!
Absolutely. Sometimes just a 30° shift in PSA can mean .010-.015 points in intermediate differential because you could either hit the dense moment arm or miss it entirely.
@brunsnick last question. So wouldn't didn't PAPs with same layout strike the core different thus changing after drilling numbers? Which in turn changes the motion? Or is accounting for pap with a layout suppose to allow for the holes to hit the core the same?
@airammitchell682 very minor influence. We addressed this on Perception vs Reality Podcast Episode 43. The numbers were only a few points off after drilling.
Similar to the Bonus but with HK22??
Stronger.
Coulda called it The Payback Solid. 😊
Not sure about that 4 pin. Haha
How? I don't understand.......8 pin is now a mandatory part of your videos? ...🤣
It’s like a recurring character now. I can’t help it.
Nick call me Crazy i keep hearing Intel but it’s the payback core. I checked it looks nothing like intel.
Hearing Intel where?
I think some misunderstood what Phil was saying. I had several people say intel. I was talking to you because I knew you would know for sure. Thanks your my information guy. Oh I know I asked before but please do a show on your aiming. I’m working on what you said getting better using your targeting if I’m right. Show please. Lol
oh my oh my damm 88888888888888888888888