i got this ALARM; A1m000: Fail Safe, after they inserted the net-metering meter by my electrical subscriber, what should I do, please step by step procedure. thanks
How toset minimum output voltage in all 3 phases.as in afternoon one of the phase goes up to 181 voltage.and what is minimum requirements of voltage of grid in all 3 phases to run inverter uninterrupted? Sir
We had our Solis inverter installed last November. We have had problems ever since. The lights are flickering constantly every night. Installer also asked us to install 2 different lights but the flickering continues. When I bypass the Solis system, and go directly to the grid, I have no flickering at all. The installer already replaced the inverter once and the flicking continued. Also, the Soluna battery doesn't kick in, sometimes at all, and we are in the dark during a power outage. It happened twice last night. I want to believe that our installer means well but this has been going for over 8 months now. Is it the system or the installer? Any input or advice is very much appreciated
The installation is not right, if you have a Hybrid inverter then the inverter should be in bypass operations as long there's power from the grid, as soon the grid goes out, then the battery kicks in, do you have a split phase system 120v per phase? or is it 240 phase, If it is split phase then the Neutral should be attach to the neutral of the inverter, and mostly make sure the grid standard is set right in the inverter for your region
Hola estimado primero que todo excelente vídeo, una pregunta me imagino que para usted sera fácil responderla.. tengo un Solis de 3 kw .. y me ha dado ya tres alarmas OV-G-V1:....lo tengo ya de hace un mes.. Tengo un medidor de voltaje instalado para rieldin en mi tablero testea amperes watts voltaje y siempre esta constante 230 a 235 volts y no tengo transformadores cerca a mi casa tengo una red publica muy normal. ..Nunca he movido parametros como para dejar un voltaje de corte en caso de picos de corriente y tampoco en menos voltaje ..Te comento cuando lo compre me dijeron que no moviera ningún parametro llegar e instalar!!!.. Lo compre e instale de fabrica.. Tengo entendido que hay que entrar a configuración avanzada y buscar acá en mi pais CHILE por los ciclo osea los Hz acá somos 50... Este inversor de fabrica viene en otra norma mas americana, busco información y muchos dicen que hay que entrar a configuración avanzada luego usuario definido y dejarlo en CHILE ya que hay varias opciones regiones paises !!!.. gracias y quedo atento , saludos
As long as its the same voltage on panels you can. If the only difference is what the wattage the panels can generate and they use the same voltage then you can
hello can you teach us how to limit the power ? not to feed extra power to the grid..i have purchase 1kw of 4g and its burden to me set the export control.. pls make a video training sir🙏
Please, how to set up export control, on grid solis inverter? To prevent overflow energy to back to grid?
Hi. Great video. So always must set off gird if you want change voltage standards?
Hello sir how to start inverter with 410V
How to configure if used as ac couple in tbb inverter via frequency derating?
i got this ALARM; A1m000: Fail Safe, after they inserted the net-metering meter by my electrical subscriber, what should I do, please step by step procedure. thanks
Hi we live in the mountain we do not have any electricity is solis 4G three phase inverter can works thanks
I have my inverter some time saying LimByvg how to fix it
Hi. I have the S5. should I be able to power it up from mains only in order to access menus?
How to modify reactive setting ,
How toset minimum output voltage in all 3 phases.as in afternoon one of the phase goes up to 181 voltage.and what is minimum requirements of voltage of grid in all 3 phases to run inverter uninterrupted? Sir
Why doesn’t your mobile app work properly on apple phone ios10 and above? Can’t see the top of the data..thus cannot choose bar graphs etc.
Good Explain 👍👍
Can you connect a smart meter to the solis inverter? Which one?
smart meter for what purpose?
Hello can make technical support on 50kw 3phase tie grid addition devices protection. Thank you.
Sir where will be the option of export to Grid on/off
How do I test or check to see if my system is working correctly
We had our Solis inverter installed last November. We have had problems ever since. The lights are flickering constantly every night. Installer also asked us to install 2 different lights but the flickering continues. When I bypass the Solis system, and go directly to the grid, I have no flickering at all. The installer already replaced the inverter once and the flicking continued. Also, the Soluna battery doesn't kick in, sometimes at all, and we are in the dark during a power outage. It happened twice last night. I want to believe that our installer means well but this has been going for over 8 months now. Is it the system or the installer? Any input or advice is very much appreciated
The installation is not right, if you have a Hybrid inverter then the inverter should be in bypass operations as long there's power from the grid, as soon the grid goes out, then the battery kicks in, do you have a split phase system 120v per phase? or is it 240 phase, If it is split phase then the Neutral should be attach to the neutral of the inverter, and mostly make sure the grid standard is set right in the inverter for your region
hi all. please help me with some information. If the greed stops in the house, do I still have electricity? thank you !
Sir, what is the meaning of Export_P negative watts or positive watts on solis display screen?
ive got an error operation unfinished anyone have ever experianced this?
Hi. Which standard is for Poland in Europe ?
What means power shows on lcd screen?
How to status USB bus solved problems
My new 5kw solar inverter have a password.. when i enter the default password that is given in the manual, it was error.. what shoud i do?? Thanks
After i save and exit theres is another option to set. Not like this its automaticaly dobe
Hola estimado primero que todo excelente vídeo, una pregunta me imagino que para usted sera fácil responderla.. tengo un Solis de 3 kw .. y me ha dado ya tres alarmas OV-G-V1:....lo tengo ya de hace un mes.. Tengo un medidor de voltaje instalado para rieldin en mi tablero testea amperes watts voltaje y siempre esta constante 230 a 235 volts y no tengo transformadores cerca a mi casa tengo una red publica muy normal. ..Nunca he movido parametros como para dejar un voltaje de corte en caso de picos de corriente y tampoco en menos voltaje ..Te comento cuando lo compre me dijeron que no moviera ningún parametro llegar e instalar!!!.. Lo compre e instale de fabrica.. Tengo entendido que hay que entrar a configuración avanzada y buscar acá en mi pais CHILE por los ciclo osea los Hz acá somos 50... Este inversor de fabrica viene en otra norma mas americana, busco información y muchos dicen que hay que entrar a configuración avanzada luego usuario definido y dejarlo en CHILE ya que hay varias opciones regiones paises !!!.. gracias y quedo atento , saludos
Hi you need to set your Inverter manually by your countries standard electric settings don't rely on the preinstalled versions
Can you pls make video for uk also
Can i connect 6 /320watt panels and 6/380 watt panels at the same time
As long as its the same voltage on panels you can.
If the only difference is what the wattage the panels can generate and they use the same voltage then you can
Hi! What can be the fault on the inverter that doesn’t start automatically in the morning?
1:29. You're welcome
hello can you teach us how to limit the power ? not to feed extra power to the grid..i have purchase 1kw of 4g and its burden to me set the export control..
pls
make a video training sir🙏
no limiter for 1k inverter for solis.. only 3k to 5k inverters
@@MrNgongoy How To Stop Backflow Power To Grid, Please Explain
@@MrNgongoy which export limiter?
Xin chào bạn ! Biến tần của tôi liên tục báo lưới trên tần số ! Xin cho biết cách xử lý . Thansk
Inveto của tôi 5kw