Hi cam just a quick question, what tip do you use to cut your ceilings and walls in? Also what pressure? Could you do a speed test on cutting rooms in for us?
no probs , I actually spray my walls and ceilings to a finish but I can do a speed test on just cutting in . I would be using a graco Ltx 517 spray tip and the pressure will be around 2200 psi. I'll do a vid this week
cam decorations thanks mate, I have learnt a lot from your videos I currently use a Graco ultra but you have convinced me to buy something bigger Iv gone for the q tech qp019 to see how I get on. A cutting in video would help a lot, could you show us how you would do the kitchens an bathrooms??
Hi colin can i ask with the reveals that weren't mist coated i notice you gave them a light spray was that paint watered down or is it the same consistency that you use for finish coat?. Thanks so much love the videos
Kid do what I do for the kraft shield holder down to tescos or any other big store and get a load big boxes for nowt of them and carve them up using one of the trimaco cardboards as a template.
You could spay it again with in an hour if you've got the heating on. Me personally I would give it a day because you've still got to do your prep work on walls and ceilings.
Hi Colin do you ever run oil base through your sprayer if so what do you then clean it with, secondly do you always use pump armour or is there a cheaper alternative. Thanks buddy
Yes there is a cheaper version I use , it's called q tector it's about £14 a litre and that litre should last you about a year you can buy that from www.airlesspro.com. I don't run oilbase through my sprayer but if your going to do that you just use white spirit to clean everything up with unless your using some kind of shellac paint or cellulose paint then you would use the correct thinners to clean it down with
Down to the local deals or poundshop and buy a bottle of premixed anti freeze it's 70% glycol it's what Gracos pump armour is basically made up from. Being using it for years works like a dream.
@@camdecorations9779 I found with meths, white spirit you want to be careful with it evaporating I went to use some of my machines and when flushed fuck all of it was left.
Yeah there really handy things to have I'm always trying to find things that will increase my speed or better protection or improving my technique , you never stop learning in this game
@@chadpayne2472 your new in the uk to spraying, we had shields 15 years ago no one uses them now, you to will learn why... its the owner that's paying for materials anyway...
I just watched your video. Thank you very much it was very helpful. thank you for taking the time to help.
Thanks terry
Great info, thanks for the help 👍
Hi mate,where do you get the trim coat shield from?
Which can I use to cut the lines on my wall close to the ceilimg
great info man ive subbed
Used the Trimaco ones, there not bad , got an old metal one as well
Marvellous x
👍👍👍👌❤️
Hi cam just a quick question, what tip do you use to cut your ceilings and walls in? Also what pressure? Could you do a speed test on cutting rooms in for us?
no probs , I actually spray my walls and ceilings to a finish but I can do a speed test on just cutting in . I would be using a graco Ltx 517 spray tip and the pressure will be around 2200 psi. I'll do a vid this week
cam decorations thanks mate, I have learnt a lot from your videos I currently use a Graco ultra but you have convinced me to buy something bigger Iv gone for the q tech qp019 to see how I get on. A cutting in video would help a lot, could you show us how you would do the kitchens an bathrooms??
Hi colin can i ask with the reveals that weren't mist coated i notice you gave them a light spray was that paint watered down or is it the same consistency that you use for finish coat?. Thanks so much love the videos
Hello mick its the same consistency as the final coat . Thanks for watching
@@camdecorations3502 thanks colin 👍
6 inch wienie roller to roll off excess paint and use it also to cut in window to keep from over loading shield with paint.
Use 1 shield per reveal , stay at the right distance and angle you won't need to use a roller for excessive paint
Kid do what I do for the kraft shield holder down to tescos or any other big store and get a load big boxes for nowt of them and carve them up using one of the trimaco cardboards as a template.
Colin how quick can you top coat new plaster after I’ve mist coated it
You could spay it again with in an hour if you've got the heating on. Me personally I would give it a day because you've still got to do your prep work on walls and ceilings.
Why are you mist coating. There's no reason for it ...
Hi Colin do you ever run oil base through your sprayer if so what do you then clean it with, secondly do you always use pump armour or is there a cheaper alternative. Thanks buddy
Yes there is a cheaper version I use , it's called q tector it's about £14 a litre and that litre should last you about a year you can buy that from www.airlesspro.com.
I don't run oilbase through my sprayer but if your going to do that you just use white spirit to clean everything up with unless your using some kind of shellac paint or cellulose paint then you would use the correct thinners to clean it down with
Down to the local deals or poundshop and buy a bottle of premixed anti freeze it's 70% glycol it's what Gracos pump armour is basically made up from. Being using it for years works like a dream.
@@johnmcmorrow1104 yeah I've heard that I've also heard that mineral spirit works really good as well
@@camdecorations9779 I found with meths, white spirit you want to be careful with it evaporating I went to use some of my machines and when flushed fuck all of it was left.
@@johnmcmorrow1104 snap I’ve been using antifreeze in my GRACO 390 for years, Cheaper and works great 👍
Funny I was just looking at the stair protection yesterday mate 🕯☕️🚬🎥
Comes in handy , that's all I use for reveals now and it's free 👌
Can I use this to cut lines on my wall/ ceiling
No you have to do it the old fashion way by brush , there's nothing out there that can beat the accuracy of a brush for cutting in
Hi, where can I buy these from?
www.mypaintbush.co.uk good paint store
@@camdecorations9779 thanks Cam
I don't use them but I should
Yeah there really handy things to have I'm always trying to find things that will increase my speed or better protection or improving my technique , you never stop learning in this game
Yeah. I'm the same way when it comes to condoms.
19 doors WTF not 20, nineteen.
Now do it with color.
OK 👍
Just mask the fucking window mate!
You should add "English" closed captioning for people in the states Governor!
🤣🤣🤣 cool will do 👍
Absolutely not necessary. His English is just fine.
Amateurs use them professionals use a masking machine.
😂😂😂😂 thanks jono3679
Tape and paper costs double than 0.50 cent peice of cardboard
@@chadpayne2472 your new in the uk to spraying, we had shields 15 years ago no one uses them now, you to will learn why... its the owner that's paying for materials anyway...
Great info Cam. I like those stairtread guards. Apart from on sites do you know where to get them? Cheers
@@camdecorations9779 you still useing the shields
so make up your mind, mate; do you want to be white or do you want to be black??
jk!
😐
How about I'll just be me 🤔