KRISS MagEx2 Extended Magazines with Glock 30SF and Glock 21SF (.45ACP)
Vložit
- čas přidán 1. 04. 2023
- GoPro Target Practice (9 Yards)
These KRISS MagEx2 extension kits extend the standard 13-round .45ACP Glock 21 magazines to 30 rounds with their +17 extended base plates. They are intended for use with the KRISS Vector carbine rifles which are produced by KRISS USA.
See more of these guns:
- Glock 21SF - • Glock 21SF (.45ACP)
- Glock 30SF - • Glock 30SF (.45ACP)
- Glock 21SF vs Glock 30SF - • Glock 21SF vs Glock 30...
Blazer Brass .45ACP 230 Grain FMJ Ammunition - Sport
The sight of you holding up both pistols with the mags seals the deal … can’t get anymore beautiful than that!
God I’m glad I was born before this new generation you don’t know anything about good firearms getting the 1911’s Beretta’s hammer fired. Pistols you’ll never wanna Glock again. Trust me I’ve been there Ione three of them and I want to get rid of all of them.
Yea f a glock...
@@cd-kd8mb if your a hater just say that bro 😅
@@drakewhisenant4831 not a hater per say had many glocks and always had problems. when to hnk pistols n never looked back....
Just the sight of these two alone is a wonderful thing 🫡 👑
I own a gen 4 Glock 10mm I made sure that I got the best extended mag. Spits awesome at the range. ❤💪🏽💪🏽
I'm sure it doesnt.....f ..a glock
@@cd-kd8mbdude shoot a tarus😂
You just motivated the fuck outta me. I have a fairly new Glock 30s that I've been practicing with. This is type of accuracy is what I'm aiming for. Good shit!
All it takes is a lot of practice, ammo, and motivation and you seem to have the motivation 😄 Congrats on your new G30, it's a fantastic shooter. Good luck!
F..a glock
Such a good video, dude has have good control over the recoil 💯 and the fact that i can see where his rounds are hitting is good too.. i can see hes a pretty accurate shot 💪🏻
I can smell the gunpowder thru this video...
I love that smell 😄
China has a 30 round extension,
Korea has a 30 round extension and
the Kriss 32 round extension - Glock 45acp
Very nice! Hug from Brazil! 🇧🇷
My love for the .45 glocks has increased
Glocks =pos
“Glock 2 1 feel like it dribble it got mad bounce” - Mo P.
The accuracy though 🤯🤝🏼 i love my glock 21 the frame might be fat 😂 but shes reliable
Nice shootin!
Insane fire power 🔥🔥
Amazing
Nice
The shots on the ceiling 😂
Most of the damage to the ceiling panels isn't from people hitting them directly. It comes from lead and jacket fragments that break off when people hit the metal target hangers which happens all day long.
@@GigatonsGunworks I figured some ricochets but dang daily that’s scary to think about
@@smokeone4427 It's not a big deal. People do it all the time, sometimes every few minutes or many times in a row. The part that gets shot is the clip that holds the target which also happens to be right above the "head" of smaller silhouette targets. People go for head shots and if their shot lands a few inches too high, it hits the metal target clip. The clips are designed like triangles so the fragments go toward the end of the range and not back toward the shooters, but the fragments that spray upward do bits of damage to the ceiling panels which is why this range changes out the panels once in awhile.
you never experienced jam issues with the 30sf using the kriss vector? I have a 30sf also and so that means you’re using the 21magazine for the KV?
No I haven't had any problems with either gun while using the KRISS MagEx2 extensions. Yes, I am using a G21 magazine in the 30SF in this recording.
That is sweet reminds me of robo cop I wish you let it unleash
Damn I thought you was gonna dual wield it lol
I've seen a couple similar comments like this so perhaps I'll make a dual wield recording of these in the future. I do have some other dual wield videos on my channel so I'm not sure why I didn't really think to do it with these. Thanks for watching!
Vectors tend to jam
buen tiro bro
Is the vec mag reliable for mag dumps
They should work fine. I haven't had any malfunctions with them.
Did you use a Glock 21 magazine for the Glock 30sf
Yes, that's why the extension doesn't sit flush against the grip like it does with the Glock 21. The Kriss extension kits are only for Glock 21 magazines.
Have you done any rapid fire with them@@GigatonsGunworks
@@brianditto7678 Not really. I've shot quicker than in this recording but nothing that would really be considered rapid fire because the ranges I go to don't allow it.
What are those things that are on the magazines called
They are MagEx2 extension kits produced by KRISS USA.
@@GigatonsGunworksHow does it fit flush ?
@@ICEDT3AOG It fits flush on the Glock 21 because it uses the Glock 21 magazine as the base of the extension. It won't fit flush on the Glock 30 because the handle is too short for the Glock 21 magazines so there will always be a gap between where the G30 handle ends, and the Kriss extension begins. The extension kits are designed to use the G21 magazines as a base.
good aim baby girl yoohooo
Where can I get one shipped to nj
You can order them from any website that sells magazines and has them in stock, or you can just order the extension kits if you already have your own 13-Round Glock 21 magazines that you want to upgrade. This may not be easy if you live in a state with magazine restrictions and can't get a hold of standard cap G21 mags (to my knowledge, the extension kit will not work in mags that are limited to a lower capacity). Good luck to you.
what country is this
This is in the USA.
Been thinking about some of these for my G21. Any issues with yours? I get mixed reviews on these when I research them...
Nope, they go bang every time and the installation is super quick. I'm half considering getting a couple of the version for my 10mm Glock mags but I don't know if it's worth the space because they are rather bulky and I don't shoot 10mm half as much as I shoot .45. If you're interested, I would totally recommend them.
@@GigatonsGunworks have u had any jams? I want a g21 but I need a extended mag an kriss vector gets a good an bad name
@@Glockbaby244 These are the first KRISS products I've purchased but I haven't had any issues with these magazine extensions so far and they worked as I expected them to. I haven't had any problems loading them up and they feed fine in both my G21 and G30 as you can see in this recording. I've run several boxes of ammo through both mags now for fun and no malfunctions yet. Good luck to you.
@@Glockbaby244 they work bought 2
@@snowfall1771 did u get the ex 2? Or the regular
❤
What kind of mag is that
They are standard Glock 21 magazines with the KRISS MagEx2 extension kit installed.
Mine gets stuck like half way thru then spit all the bullets out anyone know why
Unfortunately I don't know why this could be occurring as I haven't encountered this problem. Sorry to hear you've been having issues. Good luck, and hope you can figure out what's causing your malfunctions.
Another npc bot comment wasting its time
woww😮👍
🤔 What VR game is this.. looks awesome..😅
This is the public beta for the shooting range update that's a part of the next Pavlov DLC.
@@GigatonsGunworksbro real ones know pavlov
This needs a switch
its like you are inspecting your guns in a video game
Or maybe it's that in video games, it's like you are inspecting your guns in real life 🤔
Glock makes the best. 45 cal if you want quantity over quality
It’s a mix of quality and quantity glocks are great guns ‼️
Nah Springfield does
No hnk makes best 45..period
Glock Anderson
Push your right thumb against slide so it’s parallel with the slide.
Couldn't do the trigger reset when he sped up, so what's the point?
0:32
Bro can I fit one of these in my g22?
KRISS only produces the MagEx2 extension kits for .45ACP, 10mm, and 9mm Glock magazines. For .40S&W, you'd probably be best off buying the official 22-round big stick magazine that Glock produces from the factory. There are some other brands of large capacity aftermarket magazines that you can get as well such as ETS. Good luck.
The 9mm whole feed it I have a Glock 22
Would*
My kriss mag jammed on me repeatedly
Sorry to hear yours didn't work out for you. I haven't had any problems on mine with either the G30 or G21. You might want to consider an exchange if the one you got is defective, or contact KRISS for support. You could also just open it up and try to troubleshoot it and see if it's an issue with needing dry lubrication, and check for burrs in the material that could be interfering with your spring. Good luck to you.
@@GigatonsGunworks yes I will be able to fix it. Just need to open it up and mess around with it. I have a glock 41. I just bought 2 kci korean 26 rd mags. I hurt my fingers loading the new ones. The kriss mag was fairly easy to load. It must be the spring. I was getting double feeds with the kriss
@@GigatonsGunworks thanks for your reply
@@AlexMartinez-gl2lm It's no problem! Yeah it's usually something to do with the spring. I would look for burrs that might need to be filed off around where the top of the magazine and the extension meet, and make sure there's some dry lubrication powder on the spring to allow it to move smoothly. Also maybe just double check that the follower doesn't have any weird plastic burrs or anything like that. Hope you are able to get to the bottom of it quickly.
@@GigatonsGunworks good info. I appreciate the advice
Can you sund nambar
Note ✍️ 💥🎯💥GUN RANGE 💥 SAFETY FIRST 💥💯......
De oro te voy a mostrar ijo treinta
this range is probably as old as you are
👴
Thats great send me an glock?
😂
Rafagaso
🥱😴💤💤
no auto
yeah.if i see such a magazines i expect full auto.
Full auto is completely useless in a pistol unless you're literally standing over your target on the ground and even then a lot would miss. The barrel is way too short for the type of kick you get from an auto. At 10 yards your bullet spread is likely 30 to 70 feet if not more. 😂 Only dumb@$$ hoods think a switch on a pistol is good. And that's because they can't hit s#!t to start with. It's always spray and pray with them even when firing a semi-auto 😂
He shoot to slow, on to the next video.
Shoot you a 1911 a 2011 or a good HK USP, Beretta hammer fire you will never want to shoot a Glock again unless you change the trigger the grip frame, the sights Glocks suck