Just a quick update about these Belted 2.8s 👀. After only 2 bashes I found one of the plastic wheel hexs was badly cracked with a horrible wheel wobble 😬. I chose to upgrade to the pricey aluminum hex option only to realize they're 22 grams each 😱. In a nutshell, I'm a bit disappointed. At this point, I simply can't consider these a good value for the cost 😝. Hopefully, Proline will offer a belted option with their lighter traditional molded rims priced more reasonably. 🤔
@@zoomzoomtoys131 sorry just saw this 👀. They've held up fine, but they're so heavy they heat up my electronics. The tires are bouncy and handle crappy on choppier terrain. I had pressed Proline for a belted option for awhile. It seemed lots of their other wheel options suddenly weren't available once these went available. Marketing tactic 🤔.... perhaps. Either way, I'm not a fan of bolts and added gram weight with this design. I can't recommend this option because I really don't like it. 🚀🚀
@@richduperbash2966 As far as it goes with the Trenchers and your feelings, I want to try the new 2.8" Belted Trenchers HP. You feel they heard your voice for improvements over this review...I like the wider look of the tire since the belted MX28 2.8" and smaller in width over the non-belted.
Rich I just noticed you’re up to 7k subscribers! Congrats bro! I remember when you were just a little bitty guy. Hahaha! It’s your personality, RC knowledge and awesome videos! Keep them coming brother!
Thanks so much Brother 😊!!!! To me it's still about sharing ideas with each other and just having fun in the hobby 🤗. Appreciate the support my friend 👊👊😎💪👊👊
YESSS! Finally belted tires from Pro-Line. Very good and very interesting to see how they perform on your rig! Thanks for showing us. Yes, may be a Little bit on the bounzy side but for my high Speed rigs worth a try. For pure basher I might stick to the regular once because the ballowning is part of the trick. Awesome Bashing with your Buddy, nice jumps.
Excellent bashing Rich! 😎🤘 Loved seeing the Truggified Typhon back. It’ll be exciting to see what P-L does in the future with belted tires. You put them through some insane testing in this video, it’s great to see they held up and performed well for ya! 👌
Thanks so much Garrett 😜!!!! I always look forward to getting the Truggified out 😍. Haven't ran the red body in ages. Been pleading with Proline to give us belted options for awhile 👀. I'm excited to see what else they come out with. 🍻👍👍😎💪👊👊
Thanks so much Scott 😁!!!! I'm really hoping these wheels hold up overtime. So far I'm digging them. Just a bit stiff right now but that's better than the alternative. 🍻👍👍😎💪👊👊
The dynamic duo is back in action baby!! Awesome awesome bash Rich. Love seeing your Orange darling getting some action. Love how you're really squeezing more life out of that Body LOL 😂. Putting belted trenchers the test. I've been curious about those tires. Glad you got your hands on them. Appreciate the great info brother. I'm holding out for possible mx28 and 3.8 belted Badlands. Awesome bash brother always enjoyed it very much.
Tht hit at 6:56 looked like you were going to keep going up n up n up SHEESH!!! Thanks for the 411 on the new 2.8 belt's I had read so much about just after buying/firt run with SRC Road Crushers it was pretty intense road crushers intest driving the V4 kraton on one of those Amazon/Yoowoo Graphene 6200 4 cell that I pulled the trigger on recently. I mean I had an opportunity To do some basic tuning before hand but I it was still intense. Cant wait for some something belted that's better on the harder landings for sure but well see... great bash with the O.D. the TT is a def beast even with the track down for maintenance and all on your end but thanks again. Be good Rich
Your like CZcams's, CZcamsr. Always see some big channels chatting down here. For some reason I thought you had 100,000 plus subs. We need to get you numbers up Rich, love your content.
Ramps on the jump, love it! That little darling is a drone man! Fantastic air control sir, wondered if the belted tires would stop the flipping but you just proved that wrong 😀 Thanks for keeping me up a little longer, get to go to bed with truggified typhons jumping through my head, cheers!
Thanks so much Rich 🤗!!!! These belted Trenchers fly pretty good 👍. They have the size and mass for good air control and land nicely for being so firm. They seem like a solid option for 6s speed bashing. Hopefully they'll break in nicely and soften up just a bit more. 🍻👍👍😎💪👊👊
Awesome Rich! Glad you made this video, I have been looking at these and the low profile LP for a couple different trucks 👍 Honestly undecided now 🤔 They might just need to wear in a bit... The floaters you had at the end were friggin killer 😱🤯😀👍👍
Thanks so much Aaron 😊!!!! The Backflip LP's are absolutely perfect bash wheels on 6s power with the bigger rigs. These belted Trenchers should soften up hopefully. Both are nice wheels IMO. Felt good to do some senders 😍. Next time I'll have my suspension dialed. 🍻🤘🤘😎💪👊👊
I own em bro. Perfect timing for this vid in many ways!! Excellent show! Proline didn't offer the plastic 17mm when they released the sale (out of stock.) Only had on offer the *quite expensive aluminum kit that takes $80 to fit the truck. I hit up my regular Ebay guy mr-retro for the plastic 17mm for $8 to fit the truck. Other than that I haven't put em on anything yet. 🤔 I have a truggied typhon that deserves a shot but scared on the speed pinion because I ruin tires too often. Easy switch though and worth it ....now that you showed some big potential, I'm motivated. Initial plan was for brcc and/or granite but they can share. 😊👍👍🍻🍻
What an awesome Orange Darling/Truggified vid brother Rich!! All dedicated to her!😍Some killer running and launches especially with the ramps on the berm!😱👌Hate to see the retirement of the Orange C10..You gotta bring a new one back!!😂Nice demonstration of the Belted tires!..I was going to order a set a while back but was just too hesitant knowing how bad the Truggified handled with strapped 2.8's..Especially in more rocky areas..They seemed to have done pretty good though! I noticed a little traction roll and bounciness though in the beginning. Maybe after they loosen up a little and get some wear they'll be just right!👌My Truggified V4 is kind of on the backburner..Too many other things going on and boats too😂. Anyway, great vid once again bro!!!😎👍👊👊🤘🍻😂
Thanks so much Eric 😜!!!! Yeah I thought my braided MX28s were too stiff and bouncy at first too. Back end was always getting loose 👀. After multiple runs, they started feeling better with really fast driving. Hopefully these will soften up some 🤔. My shock setup is a bit stiff right now. I later found my front lower hinge pin block was cracked at the mounting hole in addition to loose steering components 🤣🤣. No wonder I was zig zagging everywhere with OD. It's bone dry powdery/rock hard dirt right now too. I felt very compelled to get these cuz I've been plying Proline to give us a strapped option for probably over a year 😁. Felt Killer to get the Typhon back out Brother 😍. Still my favorite 👌. Should have my new truck body cut out after vacation 😁🤘🤘😎💪👊👊
Well am glad you got your money's worth, the wheels performed well , Rich I Think your Channel is my all time favourite bro, Just love your enthusiasm and Knowledge of this hobby, you always seem to have fun like me, hopefully one day if I win the lottery I'll pop over the pond and meet up with you 😁 yet another fantastic amazing bashing video brother , looking forward to the next one 👍😁👍
Thanks so much Tony 😊!!!! That would AWESOME if you ever hit the jackpot 😱😱🙀. I'd build a world class Bash Ranch if I ever win the lottery 😍. Truly appreciate the kind words as always Brother!!!! 🍻🤘🤘😎💪👊👊
Thanks so much Bro😜!!!! It was Killer to finally do some running again 🤗. Bummer the track was closed, but still had a Blast 👊. Talion was looking good too 👌. See you soon Bro. 🤘🤘😎💪👊👊
Thanks so much Brother 👊!!!! Not sure why it took them so long 😝. They're pricey, but I'd been asking them for a belted option for awhile. I'm stoked the option is finally available. They're definitely fast wheels. 🍻👍👍😎💪👊👊
Good test and review in the field ! People been wanting these 0 ballooning tires for a long time, maybe not everyone will like 'em though. What you're saying reminds me a lot of the MX43's (no, i'm not using them on any arrma) which is a great tire/wheel you really never have to worry about, however it's not the perfect bash tire imo just 'cause of that stiffness, a bit bouncy and a bit harder on the suspension.
OD..Od...o...d....omOD 😍😍😍😍, i agree..best ever..looks good dear brother Rich, im happy they can offer belt and non belted tires ❤. T🐕 on the Talion, awsm 2. Happy bashing when ya coming back brother ❤❤❤..now work 🤪
Thanks so much dear Brother 😍!!!! Was so AWESOME to see Tristen running the Talion 👀. Been way too long since we ran together 😝. Truly appreciate your gift Thomas 😍🤗🤗🤗. Hope these tires soften up with time. Getting on the plane now 😱😱😎💪👊👊
Sick bash as aways mate. 😎 Great to see you test these tyres. I use Trenchers for everyday bashing on my 6s Slash and hate the ballooning. These might be ok but the extra weight bothers me. Currently I strap them with braided line RC Bashing the Kraton style. Can't run Badlands because the rocks where I play rip knobs off or tear the tyre. 😨 Keen to see if you sought out the handing. Really need a tough tyre with grip. Bash on bro. 👍
Thanks so much Trent 👊!!!! Hopefully these will break in and soften some 🤔. Think they weighed in around 240gm with hexs installed. Definitely not light, but my temps were acceptable and they have decent air control 👌. I think I like MX28's a bit more, but gotta use what fits your terrain. Braid works excellent too. We'll see how these hold up and perform over time. 🍻🤘🤘😎💪👊👊
Thanks Brother 👊!!!! The stock V3-V4 shocks have worked Killer for me 👌. The chassis absorbs most of the bigger hits. Running slightly longer Turnigy Trackstar 1/8 buggy/truggy springs on this rig. Usually only break the stock rod ends and swap them out for either Tekno or ARRMA Nero HD ones. 🍻🤘🤘😎💪👊👊
My concern would be loss of air control but it looks like you weren't adversely affected. For the type of bashing I do, ballooning isn't enough of a concern to warrant $100+ tires. I'm definitely going to pass on these. Great video showing everyone what these new tires are all about 😎👍 Awesome driving as usual 👊
Put em on the Infraction 😆 Nice pick up Rich !! They look great. No more tapping for u bro 👍🏼 If they had any brains 🧠 they would send you a pair to review lol !! You’d sell thousands for them 😜 Cheers Bro ! The truggified is looking the goods with all the gear ⚙️ 😁😁🤙🏼
Thanks so much Cam🤗!!!! It pained me to see the Fusion release with the same flaws as the ProMT 4x4👀. Hopefully these belted wheels hold up at this price. The Truggified 😍 takes such a pummelling 🤣🤣💪. Big thanks to M2C, Voltage Hobbies...etc👌. Bash on my good Brother 👊. Looking forward to your next upload 👀🤘🤘😎💪👊👊
Great video as always bro!!! 😎👍 I'm very curious to try the new PL belted tires but I've some concerns about the extra weight and I don't know if they are also too stiff for big landing on concrete!!! 🤔😁
Thanks Brother 👊!!!! They work very nicely on concrete 👌. Don't think it'll be an issue. Just need a bit more throttle for multiflips without the ballooning.🍻 👍👍😎💪👊👊
Sir Duperbash, do you use 1 remote for multiple rides or a separate one for each ride? On your new Arrma v4 rigs are you upgrading your remote from stx2 or staying stock? Awesome bash spot btw. It looks hot out there I wonder how hot 🔥 that hobbywing motor gets?
Just bought the m2c emulsion caps today. Is there a video how to install them ? Also where did u get that truck body. The only after market body I could find is a Vw beetle
I would love to have a typhon. The only thing that's stopping me is that voltage won't make those towers anymore. I really wish they would bring them back.
How many battery packs do you typically run through for a bash session? Curious to know how long are your bash sessions. Thinking of components longevity. Thanks - I really enjoy your content.
Thanks John 🤗. I typically go through 2-4 packs per session. Just depends on how much time I have. Sometimes I'll go through more during a group bash. 😎💪👊👊
Hey Rich good vid like always. I m talking from Portugal and i would like some advice if you could .I have a Granite 4x4 blx that does not want to go staight every time i run on road altought i adjust on the radio. Do you think it has to be with the toe or camber angle. I would must apreciate your opinion. Thanks in advance.
Hey Joao 🤗. My wife is Portuguese 👀. Steering issues can be several things. The toe and camber is always a possibility, but so are the ball links, tires, bearings, servo, and sometimes the diffs 🤔. I'd go through it slowly and systematically. It helps to replace the steering bushings with bearings. Make sure to join the Arrma 3&4s Facebook Forum. Lots of solid tips on improving the steering, suspension, you name it. 🍻🤘🤘😎💪👊👊
A awesome video rich I really needed some information from somebody I trusted on these new belted tires. Do you think these will work good for my kraton?
Thanks so much Brother 👊!!!! I'm thinking these would be a bit small on both the 6 and 4s Kraton 🤔. May be doable on the 4s just sit a bit lower and need to be geared up. I'd test fit them but out of town for several days.🍻😎💪👊👊
If you want to run a truck body, Senton 6s towers and body mounts is the easiest way to clear the towers. I was last running Senton front setup and Voltage rear tower with Kraton mounts with my Orange Darling body. It waa set on truggy style 😎💪👊👊
Amazing huge jumps!! You are awesome at landing those. I have the new belted trenchers hp and i know they dont balloon. So why did you vent yours? I thought venting was for tires that balloon.🤔
Thanks so much Brother 👊!!! Venting is to help with ballooning and also to keep stuff (dirt, water, sand) from getting trapped in the wheel and making them unbalanced and screwing up the foams. 🍻😎💪👊👊
Another duper bash man. You are definitely my favorite to watch.when i first heard about these tires i was curious about if they could be vented. I just put backflips on my kraton about a day and a half ago and i still spent nearly $100 on them( just under). So not too bad price wise comparatively. Are they heavier n harder on it when its diffing out?
Thanks so much Nick😜!!!! So far these wheels feel pretty solid 👊. They are a bit heavier than regular Trenchers, but not ridiculous. I can't see them causing an issue with the diffs personally. 👍👍😎💪👊👊
@@richduperbash2966 thats good . i have taken your advice on shimming diffs and they have have been awesome.im sure if i get a set they will hold up.have you ever done a video on your truggified slash?im honna be giving my dad a 4x4 slash n i know hed have more fun with it trugged.
@@nickteele169 I did some footage of my Slash awhile back 🤔. Actually got lots of ideas from my LHS guys and the Traxxas forums. Was running MIP Xduty driveshafts along with HR 12-17mm hex adapters. They come in 6 and 10mm offsets. This allows for bigger 2.8 MT wheels like Trenchers. The 17mm wheel hexes can handle 4s plus power without stripping too. 🤘🤘 www.towerhobbies.com/cgi-bin/wti0001p?&I=HRAC1217&P=FR&gclid=CjwKCAjw98rpBRAuEiwALmo-yrUhZj21DKeSPKNxh5PR5c87CsZ7Cl3SYazL2C9EEd6A7aQlW049cBoCTLMQAvD_BwE
Question about the venting you did on these tires: First, I assume you meant you put a hole in the tire and not the rims. If that is correct, did you vent through the belted area or somewhere on the sidewall? I assume cutting a hole through the belt isn't a big deal as long as it isn't a huge hole, but don't really know if that is true or not.
I did 2 holes per tire like I vent all my bash tires. Used 1/8" sharpened aluminum tubing. It keeps from pulling crap into the wheels and making them off balance. czcams.com/video/SJOYjbP8qT0/video.html
Hey Rich. I see you run bigger 6s packs or 4s instead of 2×3s... what chargers will be powerful enough to charge those big packs and be good quality and maybe not cost an arm and a leg? I'm having trouble finding info about how to work on my 6s Kraton and only ran nitro in the past. Also, only 1/10 scale. Sorry about asking, especially in the comments but I don't know what else to do. The only shop near me won't help me because people pay them to work on their RC's. Can't be taking it to a garage lol. It's just part of it as you know well. Thanks either way whether you can help or not because your video's are great and I've learned much so I'm grateful! Keep bashin' bro!
Thanks Cole👊!!!! I'm using a Spectrum S2100 Smart Charger primarily now. It's a small, powerful, very simple and efficient unit 👍. Any dual or quad channel 2-6s capable charger will work. Best to shop for one with balance storage charge feature. These rigs aren't difficult to wrench on, just takes some familiarization. Go to tpparts-rcxtreme. Thomas P was instrumental in putting a library of how to vids together specific to ARRMA. 🍻🤘🤘😎💪👊👊
These have good foams to absorb impacts atleast 👍. I never bashed my SRC Terrain Crushers. Pretty much used them on road and lighter mixed terrain. 🍻😎💪👊👊
Hey Rich iv just built a trugified typhon. What's your secret to such smooth air control your an amazing driver with them thats for sure. Did you run on 4s or 6s in this video? Mine does like triple flips its uncontrollable 😂 I'm on the standard trenchers.
Thanks so much Brother 👊!!!! I can't say I have any secret, just make mostly smooth throttle adjustments as needed. I'm always on 6s with normally a 16T pinion at punch 7-9 with stock electronics anyways. The standard Trenchers flip like Crazy with the ballooning I've found. It's fun, but can make control more challenging and on 6s forget it 👀. I normally prefer MX28's that are taped or braided and vented to stay balanced. Hope this helps. 🍻😎💪👊👊
Thanks for the reply buddy appreciate you taking the time. I think il wrap some 50 weight fishing line around them iv seen a few guys do this. Also I should probably vent the tyres and lower the punch on the esc to tame it dowm. I also run a 16t pinion 😁
Hi Rich love your truggified buggy 😍😍 would you say this is like an outcast size with smaller tires or completely different things ? any details .? 🤘🇹🇭🏎
Thanks Brother 👊!!!! The only similarity between the Truggified Typhon and Outcast is the chassis/wheelbase. It's definitely a lot smaller in stance and width but screams like Mad and is crazy FUN 🤗🤘🤘😎💪😍👊
Thanks Marvin👊!!!! I generally air compress and clean/service as needed. For heavy cleaning, I spray 50/50 Simple Green and water, rinse off, air compress again, run lightly, and hit my bearings with WD-40 Silicone spray. I'll use bearing oil with disassembly jobs. Usually wipe or toothbrush the metals and A arms with regular WD-40. The main thing is never putting these rigs away wet. 👀🤘🤘😎💪👊👊
@@richduperbash2966 Um thank you so much for your information because I am fairly new at this and was just wondering how to clean it properly thank you so much rich you've been a big help
Hey bud! I know this video is a little old but I just got a Typhon 3s and absolutely love it! I'm a basher so I never really gave the Typhon any thought...until I saw your vids, and boy I'm glad I did. So do you think these tires would be OK on the 3s or just too big and heavy? Can you suggest another "basher" type truggy tire for the 3s? Thanks man, I love the content, keep on bashin'!
Thanks so much Brother 👊. I too LOVE the Typhon 3s. These belted 2.8's are too heavy for even the 6s in my honest opinion. They're super bouncy as well. The best set up I've found for the 3s is the original Badlands 2.8's glued on Proline F11 2.8 17mm hex rims. Killer wide stance and doesn't strain the driveshafts or electronics. I've ran them in several Typhon 3s vids. 🍻😎💪👊👊
@@richduperbash2966 I too just picked up a typhon 6s, u mentioned super wide stance but also mentioned original tire set up being the best, sorry got being a lil confused, but I’d definitely like ur advice on your favorite tire set up on the typhon, I will occasionally be running on 4s as well, so nothing to heavy,I’m also in need of tires for my notorious, thought I was gunna go with src terrain’s but o think there too low a profile.also what cheeper batteries do u recommend, there’s so many to choose from, I do have a pair of spectral 3s 50c 5000 that are awesome, but like 80$ a piece, Man I ask a lot of questions..lol Thx and awesome trucks and videos!!
Yes indeed Brother 👊. I vented them after the first bash. Seemed to make them a bit more pliable with better performance. Hopefully they'll break in nicely over time. 😎💪👊👊
I got into RC as a teen with a Tamiya Frog kit 😍. Raced for a while with my brother locally. Took a 20+ year hiatus and got back into it. I've done BMX, motocross, and Mt biking my whole life and just love the dirt. 🍻😎💪👊👊
I love my Trenchers. I have the 2&1/2's and the 3&1/2's as well. They were a 140.00 Bucks far the Big ones that I run on my Talion and and the 2&1/2's are on my Kraton 4S at the moment. pretty sure I'm going to put the 2's on my Talion and see how well it Bashes when Winter finally breaks here in Iowa. My wife was not happy that I spent right at 300.00 with tax on the Tires but I ripped up the DBoots Qatars on my Talion the fist time I ran it. I'm not fond of the DBoots at all. They have held up on my Granite BLX but I Drive the Talion more. What's your take on 6S Batteries Rich? I just bought my first one didn't realize the Balance plug would need a larger charger. I have time to get one, we're in crazy season here in Iowa Weather wise so I'm still bouncing back from my Ankle Break. I just wanna run it in my Talion. Rich I have had no problems with my Trenchers, they have held up very well and I'm very happy with them. Great Video.
Thanks Harry 🤗!!!! Glad you're liking the Trenchers 👍. I run single compact 6s hard packs mostly. Usually run Hobbystar 4800mah 50c packs from RCJuice cuz they're light yet durable and priced reasonably. They have higher mAh options for longer run times of course. Also lots of 75-120c discharge options. 🍻😎💪👊👊
Rich Duperbash I just got my first 6S the thing I didn’t think about was the Balance Plug. My chargers stop at 5 for my 4S Batteries so I’m looking for a new larger charger to use. Battery is heavy compared to my 4S ones. I run 3 s pairs in my Talion now and they run very well so I’m excited to see how the 6S works out. Thanks
That's just a standard ARRMA HD mount that comes on the Kraton and Outcast. ARRMA went with a low profile mount on the V3 Talion and later the Typhon 6s. 🍻😎💪👊👊
I'm running 16T with my Max8 2200kv combo. It's plenty fast with buggy wheels too. It's pushing temps to the upper limits of ideal with hard running in 90+ F outside temps and these heavier MT wheels. 🍻😎💪👊👊
Badlands 3.8's are like driving on rails 👀. Just need to gear up for the smaller diameter. My new personal favorite are the Backflip LP's. Slightly bigger than the Badlands, but easier midair control and flips. The regular Backflips are great too, just don't handle as nicely. 🍻😎💪👊👊
Just a quick update about these Belted 2.8s 👀. After only 2 bashes I found one of the plastic wheel hexs was badly cracked with a horrible wheel wobble 😬. I chose to upgrade to the pricey aluminum hex option only to realize they're 22 grams each 😱. In a nutshell, I'm a bit disappointed. At this point, I simply can't consider these a good value for the cost 😝. Hopefully, Proline will offer a belted option with their lighter traditional molded rims priced more reasonably. 🤔
What is your experience with the alu hexes? Have the rims held up?
@@zoomzoomtoys131 sorry just saw this 👀. They've held up fine, but they're so heavy they heat up my electronics. The tires are bouncy and handle crappy on choppier terrain. I had pressed Proline for a belted option for awhile. It seemed lots of their other wheel options suddenly weren't available once these went available. Marketing tactic 🤔.... perhaps. Either way, I'm not a fan of bolts and added gram weight with this design. I can't recommend this option because I really don't like it. 🚀🚀
@@richduperbash2966 As far as it goes with the Trenchers and your feelings, I want to try the new 2.8" Belted Trenchers HP. You feel they heard your voice for improvements over this review...I like the wider look of the tire since the belted MX28 2.8" and smaller in width over the non-belted.
Rich I just noticed you’re up to 7k subscribers! Congrats bro! I remember when you were just a little bitty guy. Hahaha! It’s your personality, RC knowledge and awesome videos! Keep them coming brother!
Thanks so much Brother 😊!!!! To me it's still about sharing ideas with each other and just having fun in the hobby 🤗. Appreciate the support my friend 👊👊😎💪👊👊
@@richduperbash2966 I think it's cos every RC vid i watch you've already commented on ;) ur a legend bro, keep at it!
YESSS! Finally belted tires from Pro-Line. Very good and very interesting to see how they perform on your rig! Thanks for showing us. Yes, may be a Little bit on the bounzy side but for my high Speed rigs worth a try. For pure basher I might stick to the regular once because the ballowning is part of the trick. Awesome Bashing with your Buddy, nice jumps.
Sick video as always, Rich. And thanks for all the insight. Another great video to watch over spaghetti.
Excellent bashing Rich! 😎🤘 Loved seeing the Truggified Typhon back. It’ll be exciting to see what P-L does in the future with belted tires. You put them through some insane testing in this video, it’s great to see they held up and performed well for ya! 👌
Thanks so much Garrett 😜!!!! I always look forward to getting the Truggified out 😍. Haven't ran the red body in ages. Been pleading with Proline to give us belted options for awhile 👀. I'm excited to see what else they come out with. 🍻👍👍😎💪👊👊
Man that thing is FAST! Another awesome video!
Thanks for posting it!
Killer run brother the tires and rig handled great despite the linkage issues. Sweet rip. Bash on 😎😎
Thanks for sharing your experience with these tires 👍 Great bashing as usual my friend 😎👍
Thanks so much Scott 😁!!!! I'm really hoping these wheels hold up overtime. So far I'm digging them. Just a bit stiff right now but that's better than the alternative. 🍻👍👍😎💪👊👊
The dynamic duo is back in action baby!! Awesome awesome bash Rich. Love seeing your Orange darling getting some action. Love how you're really squeezing more life out of that Body LOL 😂. Putting belted trenchers the test. I've been curious about those tires. Glad you got your hands on them. Appreciate the great info brother. I'm holding out for possible mx28 and 3.8 belted Badlands. Awesome bash brother always enjoyed it very much.
Thanks... Been wanting to see these tires in action
Nice run Rich. Looks good ripping around with no ballooning! (My 2yr old Daughter also enjoyed the video... ooooooo big jumpin!...) lol. 🤘
Great bash man👍👍 those belted pro line's are looking promising👍👍😁 great to see🍻
Tht hit at 6:56 looked like you were going to keep going up n up n up SHEESH!!! Thanks for the 411 on the new 2.8 belt's I had read so much about just after buying/firt run with SRC Road Crushers it was pretty intense road crushers intest driving the V4 kraton on one of those Amazon/Yoowoo Graphene 6200 4 cell that I pulled the trigger on recently. I mean I had an opportunity
To do some basic tuning before hand but I it was still intense. Cant wait for some something belted that's better on the harder landings for sure but well see... great bash with the O.D. the TT is a def beast even with the track down for maintenance and all on your end but thanks again. Be good Rich
Your like CZcams's, CZcamsr. Always see some big channels chatting down here. For some reason I thought you had 100,000 plus subs. We need to get you numbers up Rich, love your content.
Great vid Rich. I could watch these videos all day!!!
Ramps on the jump, love it! That little darling is a drone man! Fantastic air control sir, wondered if the belted tires would stop the flipping but you just proved that wrong 😀
Thanks for keeping me up a little longer, get to go to bed with truggified typhons jumping through my head, cheers!
Thanks so much Rich 🤗!!!! These belted Trenchers fly pretty good 👍. They have the size and mass for good air control and land nicely for being so firm. They seem like a solid option for 6s speed bashing. Hopefully they'll break in nicely and soften up just a bit more. 🍻👍👍😎💪👊👊
Epic bash every time buddy 🙌 Uncanny timing brotha 🏆
Ya I need a few sets of those.
Nice builds bro. And as always those jumps.
Man ohhh man am I ever going to half this good.
Awesome Rich! Glad you made this video, I have been looking at these and the low profile LP for a couple different trucks 👍 Honestly undecided now 🤔 They might just need to wear in a bit... The floaters you had at the end were friggin killer 😱🤯😀👍👍
Thanks so much Aaron 😊!!!! The Backflip LP's are absolutely perfect bash wheels on 6s power with the bigger rigs. These belted Trenchers should soften up hopefully. Both are nice wheels IMO. Felt good to do some senders 😍. Next time I'll have my suspension dialed. 🍻🤘🤘😎💪👊👊
I own em bro. Perfect timing for this vid in many ways!! Excellent show!
Proline didn't offer the plastic 17mm when they released the sale (out of stock.) Only had on offer the *quite expensive aluminum kit that takes $80 to fit the truck. I hit up my regular Ebay guy mr-retro for the plastic 17mm for $8 to fit the truck. Other than that I haven't put em on anything yet. 🤔 I have a truggied typhon that deserves a shot but scared on the speed pinion because I ruin tires too often. Easy switch though and worth it ....now that you showed some big potential, I'm motivated. Initial plan was for brcc and/or granite but they can share. 😊👍👍🍻🍻
I have been waiting to see these new proline belted tires in real world action!
That pretty nice can't wait for the full report
Nice control and nice landings man. The new PL 3.8 belted Trenchers are sick. I'm hoping the MX38 Badlands are next to receive the belt treatment.
What an awesome Orange Darling/Truggified vid brother Rich!! All dedicated to her!😍Some killer running and launches especially with the ramps on the berm!😱👌Hate to see the retirement of the Orange C10..You gotta bring a new one back!!😂Nice demonstration of the Belted tires!..I was going to order a set a while back but was just too hesitant knowing how bad the Truggified handled with strapped 2.8's..Especially in more rocky areas..They seemed to have done pretty good though! I noticed a little traction roll and bounciness though in the beginning. Maybe after they loosen up a little and get some wear they'll be just right!👌My Truggified V4 is kind of on the backburner..Too many other things going on and boats too😂. Anyway, great vid once again bro!!!😎👍👊👊🤘🍻😂
Thanks so much Eric 😜!!!! Yeah I thought my braided MX28s were too stiff and bouncy at first too. Back end was always getting loose 👀. After multiple runs, they started feeling better with really fast driving. Hopefully these will soften up some 🤔. My shock setup is a bit stiff right now. I later found my front lower hinge pin block was cracked at the mounting hole in addition to loose steering components 🤣🤣. No wonder I was zig zagging everywhere with OD. It's bone dry powdery/rock hard dirt right now too. I felt very compelled to get these cuz I've been plying Proline to give us a strapped option for probably over a year 😁. Felt Killer to get the Typhon back out Brother 😍. Still my favorite 👌. Should have my new truck body cut out after vacation 😁🤘🤘😎💪👊👊
Good step forward by Pro-Line, their tires have always been extremely reliable and belting is another step in the right direction.
Ripping bro,, Awesome stuff like Always brother
Well am glad you got your money's worth, the wheels performed well , Rich I Think your Channel is my all time favourite bro, Just love your enthusiasm and Knowledge of this hobby, you always seem to have fun like me, hopefully one day if I win the lottery I'll pop over the pond and meet up with you 😁 yet another fantastic amazing bashing video brother , looking forward to the next one 👍😁👍
Thanks so much Tony 😊!!!! That would AWESOME if you ever hit the jackpot 😱😱🙀. I'd build a world class Bash Ranch if I ever win the lottery 😍. Truly appreciate the kind words as always Brother!!!! 🍻🤘🤘😎💪👊👊
Omg that would be awesome bro, I've made a playlist just for you bro, 👍😁👍 have a great weekend 👍
Sweet bash bro love your videos
Awesome brother. I need some of those. Nice testing. Keep up the awesome vids👍👍👊👊
Thanks so much Kenny 😊!!!! Hope all is well and you're getting some RC time in 🤘🤘😎💪👊👊
Everytime I watch one of your videos I immediately go look at new rc’s to buy. You’re a bad influence 😂🤘🏻Keeps me in the hobby tho! 😁
I feel your pain :)
Awesome run👍👍
Looks like it perform pretty good. Awesome bashing time
love watching your videos bro ... just fitted my m2c chassis and hr braces in the Kraton ,hopefully I can get out this weekend! :)
Thanks so much Brother 😊!!!! Congrats on the M2C chassis 👀🤘🤘😎💪💪💪👊👊
Blowing up as per usual
Sick video as all ways bro can't wait to get back out there again with you bro 💯💯💯
Thanks so much Bro😜!!!! It was Killer to finally do some running again 🤗. Bummer the track was closed, but still had a Blast 👊. Talion was looking good too 👌. See you soon Bro. 🤘🤘😎💪👊👊
Holy cow, how high were those jumps?! Great video Rich! 👌👌👍🏼👍🏼👍🏼👏🏼👏🏼😊
Ten cows high at least and I love the grunts. 💪💪👍👍🍻🍻♥
great bash brother, tires seem good.
Thanks Philip 😉!!!! So far I'm digging them. We'll see how they hold up. 🍻👍👍😎💪👊👊
Its about time they made a belted basher tire...have to get set ....Nice dusty bash...
Thanks so much Brother 👊!!!! Not sure why it took them so long 😝. They're pricey, but I'd been asking them for a belted option for awhile. I'm stoked the option is finally available. They're definitely fast wheels. 🍻👍👍😎💪👊👊
Just ordered these for my truggified Typhon 6s. Thanks.
Good test and review in the field ! People been wanting these 0 ballooning tires for a long time, maybe not everyone will like 'em though. What you're saying reminds me a lot of the MX43's (no, i'm not using them on any arrma) which is a great tire/wheel you really never have to worry about, however it's not the perfect bash tire imo just 'cause of that stiffness, a bit bouncy and a bit harder on the suspension.
Awesome video an information as per normal mate 👍🤙🤘
OD..Od...o...d....omOD 😍😍😍😍, i agree..best ever..looks good dear brother Rich, im happy they can offer belt and non belted tires ❤. T🐕 on the Talion, awsm 2. Happy bashing when ya coming back brother ❤❤❤..now work 🤪
Thats awesome t dog got the talion
@@rcplayer7581 yes, was a gift from me. Well deserved. ❤
@@TpPartsRcXtreme and thanks a lot again brother 👊🏾👊🏾🤝🤝👍👍👍
@@TpPartsRcXtreme and I stopped a video for you last week bro 👊🏼👊🏼
Thanks so much dear Brother 😍!!!! Was so AWESOME to see Tristen running the Talion 👀. Been way too long since we ran together 😝. Truly appreciate your gift Thomas 😍🤗🤗🤗. Hope these tires soften up with time. Getting on the plane now 😱😱😎💪👊👊
Sick bash as aways mate. 😎
Great to see you test these tyres. I use Trenchers for everyday bashing on my 6s Slash and hate the ballooning. These might be ok but the extra weight bothers me. Currently I strap them with braided line RC Bashing the Kraton style. Can't run Badlands because the rocks where I play rip knobs off or tear the tyre. 😨
Keen to see if you sought out the handing. Really need a tough tyre with grip.
Bash on bro. 👍
Thanks so much Trent 👊!!!! Hopefully these will break in and soften some 🤔. Think they weighed in around 240gm with hexs installed. Definitely not light, but my temps were acceptable and they have decent air control 👌. I think I like MX28's a bit more, but gotta use what fits your terrain. Braid works excellent too. We'll see how these hold up and perform over time. 🍻🤘🤘😎💪👊👊
Nice video rich!!!!!!
Great vid bro , thanks for the part #
I want to try these new shoes !
👍🏼👍🏼👍🏼💪🏾👈
You bet Stephane 😊!!!! Happy bashing as always Brother 😜👍👍😎💪👊👊
Wow, I just happened to log on as Rich uploaded......Sweet!
You GOT Old faithful out 👍💪💪👍rich listen 2 this my neighbor mad bc he looks out his yard and sees flying rcs .
Rich Duperbash=Best laugh on CZcams 😎And great content bro, thanks for your valued info brother….
Thank you Brother 🤗. Happy bashing as always 🍻😎💪👊👊
Sick vid Rich! Just not sure how you all dont bust your shocks on this EPIC Airs!
Thanks Brother 👊!!!! The stock V3-V4 shocks have worked Killer for me 👌. The chassis absorbs most of the bigger hits. Running slightly longer Turnigy Trackstar 1/8 buggy/truggy springs on this rig. Usually only break the stock rod ends and swap them out for either Tekno or ARRMA Nero HD ones. 🍻🤘🤘😎💪👊👊
My concern would be loss of air control but it looks like you weren't adversely affected. For the type of bashing I do, ballooning isn't enough of a concern to warrant $100+ tires. I'm definitely going to pass on these. Great video showing everyone what these new tires are all about 😎👍 Awesome driving as usual 👊
Put em on the Infraction 😆 Nice pick up Rich !! They look great. No more tapping for u bro 👍🏼 If they had any brains 🧠 they would send you a pair to review lol !! You’d sell thousands for them 😜 Cheers Bro ! The truggified is looking the goods with all the gear ⚙️ 😁😁🤙🏼
Thanks so much Cam🤗!!!! It pained me to see the Fusion release with the same flaws as the ProMT 4x4👀. Hopefully these belted wheels hold up at this price. The Truggified 😍 takes such a pummelling 🤣🤣💪. Big thanks to M2C, Voltage Hobbies...etc👌. Bash on my good Brother 👊. Looking forward to your next upload 👀🤘🤘😎💪👊👊
Got a few close calls brother much respect RcFam4Life 🤜🏾🤛🏾💯🤝😎💪🏾✊🏾 nice bashing
Thanks so much Brother 👊!!!! Hopefully hook up with Tdogg again soon. 🍻👍👍😎💪👊👊
@@richduperbash2966 your welcome big bro I know that's right much respect RcFam4Life 🤜🏾🤛🏾💯💪🏾✊🏾🤘🏾🤙🏾👊🏾🤝😎
25 seconds in, SUBSCRIBED.
Those dirt trails! Lol. So dope.
Know doubt Brother 😍!!!! I love watching them smoke it up. Bone dry Sacramento summer dirt. 🤘🤘😎💪👊👊
@@richduperbash2966 literally everyones "yard' in California. Haha
Sick ass driver u have skills
Thanks Tony 👊!!! Much appreciated Bro. 🍻🤘🤘😎💪👊👊
Great video as always bro!!! 😎👍 I'm very curious to try the new PL belted tires but I've some concerns about the extra weight and I don't know if they are also too stiff for big landing on concrete!!! 🤔😁
Thanks Brother 👊!!!! They work very nicely on concrete 👌. Don't think it'll be an issue. Just need a bit more throttle for multiflips without the ballooning.🍻 👍👍😎💪👊👊
Trenchers are awesomr
Sir Duperbash, do you use 1 remote for multiple rides or a separate one for each ride? On your new Arrma v4 rigs are you upgrading your remote from stx2 or staying stock? Awesome bash spot btw. It looks hot out there I wonder how hot 🔥 that hobbywing motor gets?
Sweet!
Gtta adjust the shocks when running these
Sick bash like always, those tires look good im gonna have to check them out
You vented em? Same way as non belted tires? This is a top 5 video for me! I watched it like 10 times by now rofl
Thanks Gabe 🤗!!!! Yes...I vent them all the same way. 🍻😎💪👊👊
Were did jou vent them in the middle of the Tyre true the belt?
Amazing Bashing and Air Stunts...Those Belts Are Friggin Gettin it Done.. Fun Video Brother.. ✌😎👍 HFLPRCing
Just bought the m2c emulsion caps today. Is there a video how to install them ? Also where did u get that truck body. The only after market body I could find is a Vw beetle
I would love to have a typhon. The only thing that's stopping me is that voltage won't make those towers anymore. I really wish they would bring them back.
How many battery packs do you typically run through for a bash session? Curious to know how long are your bash sessions. Thinking of components longevity. Thanks - I really enjoy your content.
Thanks John 🤗. I typically go through 2-4 packs per session. Just depends on how much time I have. Sometimes I'll go through more during a group bash. 😎💪👊👊
Hey Rich good vid like always. I m talking from Portugal and i would like some advice if you could .I have a Granite 4x4 blx that does not want to go staight every time i run on road altought i adjust on the radio. Do you think it has to be with the toe or camber angle. I would must apreciate your opinion. Thanks in advance.
Hey Joao 🤗. My wife is Portuguese 👀. Steering issues can be several things. The toe and camber is always a possibility, but so are the ball links, tires, bearings, servo, and sometimes the diffs 🤔. I'd go through it slowly and systematically. It helps to replace the steering bushings with bearings. Make sure to join the Arrma 3&4s Facebook Forum. Lots of solid tips on improving the steering, suspension, you name it. 🍻🤘🤘😎💪👊👊
Sweet.
Nice vid and details although U can have fun without trying to kill your rc ya know. 👍
Love the vids man! What’re you using to run the truck bodies?
Thanks Matt 🤗. The easiest set up is running Senton towers and body mounts. Was running just a Senton front tower/mount in this vid. 🍻😎💪👊👊
Awesome! I’m in the process of truggifying mine as well, and the truck bodies just set em off! I sure appreciate it man!
How did you replace the stock 3 body posts for the Typhon? I want to have 4 traditional body posts with adjustment so i can run a monster truck body.
There's different ways to do it. The easiest is to swap for Senton 6s towers and body mounts. 🍻😎💪👊👊
Thats a awsome rc plane lol
A awesome video rich I really needed some information from somebody I trusted on these new belted tires. Do you think these will work good for my kraton?
Thanks so much Brother 👊!!!! I'm thinking these would be a bit small on both the 6 and 4s Kraton 🤔. May be doable on the 4s just sit a bit lower and need to be geared up. I'd test fit them but out of town for several days.🍻😎💪👊👊
One more ? King
What towers you running and body mounts?? Thanks for all your help and feedback means the world 👍💯👍
If you want to run a truck body, Senton 6s towers and body mounts is the easiest way to clear the towers. I was last running Senton front setup and Voltage rear tower with Kraton mounts with my Orange Darling body. It waa set on truggy style 😎💪👊👊
Amazing huge jumps!! You are awesome at landing those. I have the new belted trenchers hp and i know they dont balloon. So why did you vent yours? I thought venting was for tires that balloon.🤔
Thanks so much Brother 👊!!! Venting is to help with ballooning and also to keep stuff (dirt, water, sand) from getting trapped in the wheel and making them unbalanced and screwing up the foams. 🍻😎💪👊👊
@@richduperbash2966 oh ok thx!😁
Another duper bash man. You are definitely my favorite to watch.when i first heard about these tires i was curious about if they could be vented. I just put backflips on my kraton about a day and a half ago and i still spent nearly $100 on them( just under). So not too bad price wise comparatively. Are they heavier n harder on it when its diffing out?
Thanks so much Nick😜!!!! So far these wheels feel pretty solid 👊. They are a bit heavier than regular Trenchers, but not ridiculous. I can't see them causing an issue with the diffs personally. 👍👍😎💪👊👊
@@richduperbash2966 thats good . i have taken your advice on shimming diffs and they have have been awesome.im sure if i get a set they will hold up.have you ever done a video on your truggified slash?im honna be giving my dad a 4x4 slash n i know hed have more fun with it trugged.
@@nickteele169 I did some footage of my Slash awhile back 🤔. Actually got lots of ideas from my LHS guys and the Traxxas forums. Was running MIP Xduty driveshafts along with HR 12-17mm hex adapters. They come in 6 and 10mm offsets. This allows for bigger 2.8 MT wheels like Trenchers. The 17mm wheel hexes can handle 4s plus power without stripping too. 🤘🤘 www.towerhobbies.com/cgi-bin/wti0001p?&I=HRAC1217&P=FR&gclid=CjwKCAjw98rpBRAuEiwALmo-yrUhZj21DKeSPKNxh5PR5c87CsZ7Cl3SYazL2C9EEd6A7aQlW049cBoCTLMQAvD_BwE
Question about the venting you did on these tires: First, I assume you meant you put a hole in the tire and not the rims. If that is correct, did you vent through the belted area or somewhere on the sidewall? I assume cutting a hole through the belt isn't a big deal as long as it isn't a huge hole, but don't really know if that is true or not.
I did 2 holes per tire like I vent all my bash tires. Used 1/8" sharpened aluminum tubing. It keeps from pulling crap into the wheels and making them off balance. czcams.com/video/SJOYjbP8qT0/video.html
Hey Rich. I see you run bigger 6s packs or 4s instead of 2×3s... what chargers will be powerful enough to charge those big packs and be good quality and maybe not cost an arm and a leg? I'm having trouble finding info about how to work on my 6s Kraton and only ran nitro in the past. Also, only 1/10 scale. Sorry about asking, especially in the comments but I don't know what else to do. The only shop near me won't help me because people pay them to work on their RC's. Can't be taking it to a garage lol. It's just part of it as you know well. Thanks either way whether you can help or not because your video's are great and I've learned much so I'm grateful! Keep bashin' bro!
Thanks Cole👊!!!! I'm using a Spectrum S2100 Smart Charger primarily now. It's a small, powerful, very simple and efficient unit 👍. Any dual or quad channel 2-6s capable charger will work. Best to shop for one with balance storage charge feature. These rigs aren't difficult to wrench on, just takes some familiarization. Go to tpparts-rcxtreme. Thomas P was instrumental in putting a library of how to vids together specific to ARRMA. 🍻🤘🤘😎💪👊👊
Those look a lot like the src's. I've had several sets and busted several wheels doing big jumps. Lol 🤘🤘💯
These have good foams to absorb impacts atleast 👍. I never bashed my SRC Terrain Crushers. Pretty much used them on road and lighter mixed terrain. 🍻😎💪👊👊
I'm confused lol tread, size or rim looks nothing like a Src?
@@codenamethecleaner7519 they really are nothing like the belted SRC's👍
Hey Rich iv just built a trugified typhon. What's your secret to such smooth air control your an amazing driver with them thats for sure. Did you run on 4s or 6s in this video? Mine does like triple flips its uncontrollable 😂 I'm on the standard trenchers.
Thanks so much Brother 👊!!!! I can't say I have any secret, just make mostly smooth throttle adjustments as needed. I'm always on 6s with normally a 16T pinion at punch 7-9 with stock electronics anyways. The standard Trenchers flip like Crazy with the ballooning I've found. It's fun, but can make control more challenging and on 6s forget it 👀. I normally prefer MX28's that are taped or braided and vented to stay balanced. Hope this helps. 🍻😎💪👊👊
Thanks for the reply buddy appreciate you taking the time. I think il wrap some 50 weight fishing line around them iv seen a few guys do this. Also I should probably vent the tyres and lower the punch on the esc to tame it dowm. I also run a 16t pinion 😁
Your laugh is the same volume and tone every single time it's almost like it's a audio clip that you just add in
I have those wheels with 17mm adapters on a truggified Senton 6s. Hubs break pretty easy I split 4-5 of them.
This concerns me. I dont want to have to buy the aluminum for $80 from ProLine or countless spares.
Hopefully I'll have better luck 🤔. Guess that might explain the aluminum upgrade option 😝🤘🤘😎💪👊👊
Yea i feel ya. I'm selling mine. I felt the same way 180 for a set of tires is crazy.@@crimsonfancy
Hi Rich love your truggified buggy 😍😍 would you say this is like an outcast size with smaller tires or completely different things ? any details .? 🤘🇹🇭🏎
Thanks Brother 👊!!!! The only similarity between the Truggified Typhon and Outcast is the chassis/wheelbase. It's definitely a lot smaller in stance and width but screams like Mad and is crazy FUN 🤗🤘🤘😎💪😍👊
Damn! U abused that typhon until it ran out of juice
I'm digging the look of your Typhon man. Could you let me know what that body is?
Thanks Kyle 🤗. That's a Proline 72' Chevy C-10 #3201-00
Great bash what do you use to clean your rigs with safely Love the tires it's a cool cool typhon
Thanks Marvin👊!!!! I generally air compress and clean/service as needed. For heavy cleaning, I spray 50/50 Simple Green and water, rinse off, air compress again, run lightly, and hit my bearings with WD-40 Silicone spray. I'll use bearing oil with disassembly jobs. Usually wipe or toothbrush the metals and A arms with regular WD-40. The main thing is never putting these rigs away wet. 👀🤘🤘😎💪👊👊
@@richduperbash2966 Um thank you so much for your information because I am fairly new at this and was just wondering how to clean it properly thank you so much rich you've been a big help
@@moneyhouser5190 you bet Brother 👊
Hey bud! I know this video is a little old but I just got a Typhon 3s and absolutely love it! I'm a basher so I never really gave the Typhon any thought...until I saw your vids, and boy I'm glad I did. So do you think these tires would be OK on the 3s or just too big and heavy? Can you suggest another "basher" type truggy tire for the 3s? Thanks man, I love the content, keep on bashin'!
Thanks so much Brother 👊. I too LOVE the Typhon 3s. These belted 2.8's are too heavy for even the 6s in my honest opinion. They're super bouncy as well. The best set up I've found for the 3s is the original Badlands 2.8's glued on Proline F11 2.8 17mm hex rims. Killer wide stance and doesn't strain the driveshafts or electronics. I've ran them in several Typhon 3s vids. 🍻😎💪👊👊
@@richduperbash2966 awesome, thanks for the reply man, I'm definitely gonna try out that setup 👍
@@richduperbash2966 I too just picked up a typhon 6s, u mentioned super wide stance but also mentioned original tire set up being the best, sorry got being a lil confused, but I’d definitely like ur advice on your favorite tire set up on the typhon, I will occasionally be running on 4s as well, so nothing to heavy,I’m also in need of tires for my notorious, thought I was gunna go with src terrain’s but o think there too low a profile.also what cheeper batteries do u recommend, there’s so many to choose from, I do have a pair of spectral 3s 50c 5000 that are awesome, but like 80$ a piece,
Man I ask a lot of questions..lol
Thx and awesome trucks and videos!!
Rich you vented them right they. Get deadned after break them in ? I found my copper 2 better now after some wear
Yes indeed Brother 👊. I vented them after the first bash. Seemed to make them a bit more pliable with better performance. Hopefully they'll break in nicely over time. 😎💪👊👊
Just out of curiosity what got you into rcs and what was your first rc ever?
I got into RC as a teen with a Tamiya Frog kit 😍. Raced for a while with my brother locally. Took a 20+ year hiatus and got back into it. I've done BMX, motocross, and Mt biking my whole life and just love the dirt. 🍻😎💪👊👊
Hey Rich, have you found another wheel to run these tires on yet. Mine are still shelved...
I'm planning on mounting mine on the F11 2.8 17mm hex soon. 😎💪👊👊
Fits good on Maxx 4S? I think the 3.8 is too big.
I see the 3.8's are coming. Would these 2.8s be a good size for the 4s kraton and outcast?
I think they'll look a little small but be easier on the drivetrain. Those new dBoots LP tires are perfect size imo for the 4s models.
2.8 will be a bit small. I still think the original Badlands 3.8 is absolutely perfect for the 4s line 👌👌😎💪👊👊
I want try lps on 6s model
@@rcplayer7581 I do too. Bought the belted trenchers but kinda wish I had the lp backflips.
@@rcplayer7581 the Backflip LP's are AWESOME 👀😍😍😍 on the Kraton, Talion, and Outcast 👌
I wonder how long are this big air time jump? 50-60foot?
I love my Trenchers. I have the 2&1/2's and the 3&1/2's as well. They were a 140.00 Bucks far the Big ones that I run on my Talion and and the 2&1/2's are on my Kraton 4S at the moment. pretty sure I'm going to put the 2's on my Talion and see how well it Bashes when Winter finally breaks here in Iowa. My wife was not happy that I spent right at 300.00 with tax on the Tires but I ripped up the DBoots Qatars on my Talion the fist time I ran it. I'm not fond of the DBoots at all. They have held up on my Granite BLX but I Drive the Talion more. What's your take on 6S Batteries Rich? I just bought my first one didn't realize the Balance plug would need a larger charger. I have time to get one, we're in crazy season here in Iowa Weather wise so I'm still bouncing back from my Ankle Break. I just wanna run it in my Talion. Rich I have had no problems with my Trenchers, they have held up very well and I'm very happy with them. Great Video.
Thanks Harry 🤗!!!! Glad you're liking the Trenchers 👍. I run single compact 6s hard packs mostly. Usually run Hobbystar 4800mah 50c packs from RCJuice cuz they're light yet durable and priced reasonably. They have higher mAh options for longer run times of course. Also lots of 75-120c discharge options. 🍻😎💪👊👊
Rich Duperbash I just got my first 6S the thing I didn’t think about was the Balance Plug. My chargers stop at 5 for my 4S Batteries so I’m looking for a new larger charger to use. Battery is heavy compared to my 4S ones. I run 3 s pairs in my Talion now and they run very well so I’m excited to see how the 6S works out. Thanks
🔝
Mr rich how did you lift your wing up higher if you did cuz it just looks higher then mine
That's just a standard ARRMA HD mount that comes on the Kraton and Outcast. ARRMA went with a low profile mount on the V3 Talion and later the Typhon 6s. 🍻😎💪👊👊
Hey Rich
What pinion size you running
Thanks for your time bro 👍🇺🇸🤘🏻
I'm running 16T with my Max8 2200kv combo. It's plenty fast with buggy wheels too. It's pushing temps to the upper limits of ideal with hard running in 90+ F outside temps and these heavier MT wheels. 🍻😎💪👊👊
Do they hook up in dirt as well as the regular 3.8 badlands ? thanks
Not really John. If the ground is tacky maybe 🤔. These wheels are stiff and kinda bouncy. I'm not very happy with them Brother. 😎💪👊👊
Morning bro. Steller bash as always. So did you end up venting those?
Morning Brad😊!!! Yes, I vented them after the first bash using sharpened 1/8" aluminum tube in a high speed drill. 🍻😎💪👊👊
Just wasnt sure. Didn't know if it would mess with the integrity of the belts. Thanks for videos as always. Stay💪 #BashOn
Rich🤑 just curious what body is on this rig really like this body, putting it on my on typhon thanks rich 💪🏻💪🏻👍🏻👍🏻🙌🏻
That's a Proline 1972 Chevy C-10 #3201-00. 🍻😎💪👊👊
what tire would you recommend for the arrm karton 6s v4 not stock
Badlands 3.8's are like driving on rails 👀. Just need to gear up for the smaller diameter. My new personal favorite are the Backflip LP's. Slightly bigger than the Badlands, but easier midair control and flips. The regular Backflips are great too, just don't handle as nicely. 🍻😎💪👊👊