Classic Mini Oil Pressure Build with
Vložit
- čas přidán 2. 01. 2024
- How we carry out the oil pressure build procedure on a fresh build, using The Ac Dodd "0" Tolerance Oil Pumps
Loom out for our following video series showing the procedures involved in building one of our fast road A-Series Short Engine Assemblies, for the Classic Mini.
Classic Mini, Mini Cooper, DIY, Repair, maintenance, Mini Classic, Automotive, Mini, Morris, Austin, Upgrade, Modification, Engine Assembly, A-series, Classic Mini Engine, Assembly, Start to Finish, Timing, Pistons, Gearbox, Engine Block, Fast, Fast Road Engine, Rebuild, Restoration, Camshaft, Timing , Crankshaft, Endfloat , Video, CZcams, Sharing, Tutorial
Would be good to have a closer look at this test bed in the future.
Next one we get on there we will try and show it in more detail 👍
What would be, or has it change with a modified pump, the cam end float measurement? Thanks. Jon in Ohio, on an A35 1275 swap.
Camshaft end float is not affected with the use of a modified pump. No extra allowances needed. 3-7 thou is standard. Lower the better for timing scatter and chain wear