03 audi a4 1.8t ecm relay location and starting issues
Vložit
- čas přidán 23. 08. 2024
- Edit: a new relay fixed the problem and the car started right up. Finally found my ecm relay location. It's 3 layers deep under the tcm, under the ecm in the ecm box just below the windshield on the drivers side.
![VW Passat 2008 1.8TSI слабый наддув, ошибка Р0299. Финал. [Перезалив]](http://i.ytimg.com/vi/4rE_SfSoiDU/mqdefault.jpg)
Great video bro, very informative. I had my car recoded at after a transmission swap at a local car tech. Everything worked fine until i decided to wash the car one day and seen my drivers side footwell full of water. I freaked out when I saw the water was coming down from under the steering wheel along some cables. When I looked at mu ecu box I realized it had some screws missing and I assumed the water came from there. I ended up spending the whole day drying the footwell. The guy even left the windshield wiper screw cap in the engine bay which clogged up one of the draining holes which created a pool of water around the battery and brake booster. The day after I was so scared to start the car up but I did and it started but ran kinda rough with the rpms dropping. I plan on getting it diagnosed and I want to take the whole box apart to see what the deal is.
Good video directly to the point without blah blah BS
Thanks this video did help me with the problem with my car happppppy🤗🤗😁😁😁
I had the electric draw problem. The electric fans run through one of those relays. I can't remember which relay but it stay closed and kept my fan running with car off and drained my battery. After I wire brushed the sockets and put in new relays, the fans turned off and the electrical draw issue was solved. Also, the SAI began working lol. I still need to replace my cover but at least one per year I open the box to make sure it isn't accumulating moister and rust.
Is there a part number for the relay box under ecm?? Mine is completely rusted out and is in dire need of replacing. Please help :/
@russellp73 Question - did you do anything to try to clean up the relay socket, other than spraying with contact cleaner? I pulled my relays to find the same corroded mess.
Tip to others - if you haven't already replaced them, check all the relays under here. My Audi's been in sunny Southern California for all but the first 2 years of it's life, and my relays were just as bad as this one. Knowing this area is prone to corrosion, while you're checking the relays, apply a smear of dielectric grease to all the terminals as a preventative measure
No, upon looking at it, the socket wasn't that bad. Just sprayed it clean
Back of the relay looks like... complete ass. Lol! Well, hope this shit is what is goin on with my car runnin like a moldy turd. Thanks for the vid bro
Was getting Code P0688 and this was the fix even though I had just replaced this relay last year and my ecu box is sealed tight. The code also lead me to check the wires going to coil packs and fuel injectors, you may have to cut the rubber at the point of the connection to find the wires underneath are all bare and touching each other which may be blowing fuses.
I replaced that relay still no start I noticed relay 369 is corroded cud that one cause no start? Or how cud I tell if ecu is fried
@@javiangray944 I would need more info about your problem, but yes I would replace that relay too. If you have any codes it would be helpful. You can use any code reader for basic troubleshooting codes. Without anymore info I would say rent a fuel pressure tester from Autozone and get a spark tester. Testing for fuel and spark is where you wanna start. Also check your engine management fuses inside the car.
2007 Audi A4 Quattro - Same terrible design. Water in the compartment. First Round killed relay that always starter to engage based on the transmission being in Park... took a long time to find the issue. (thought it was the start at first, did not waste time and money on that). So replaced the first relay. Worked fine for 4 months then ... cranked over and no start. Traced it to No power to fuel pump. The fuel pump relay was operational but still no fuel. So disassembled that compartment as far as It can be taken apart. The ground wire Rotted from the water. So after another long process fixed the connection on the Fuel pump relay. Also inspected all other wires in that area. WHAT a TERRIBLE design. Hard to get to you many Break the covers as they do not take off the windshield wipers and remove that plastic cowling. If you Audi does start one day, it could be water in the ECM BOX. Dont start with the expensive starter.
the pne i had in the garage was diesel model (RHD) and literally three relays were swimming there, fuel pump, ecm and glow plug relays. no starting , at the try moment lost communication with everything, fault only on glow plug ciruit :D
You are the fuckin man!!!! Magilla kept saying the relays that end with the ECM, and I'm like bullshit I just opened it up and nothing thank you for showing me
Daniel S. My socket wasn't rusted but I'd get one from a junkyard car and take care to solder and protect the wire joints when you put the new one in.
russellp73 thanks!
So I just bought a 2004 Audi A4 Quattro 1.8t and there’s no crank or start. I did pop the clutch because it’s a manual six speed it ran for a few seconds then died if you have any clue let me know I’m trying an idea that I seen on CZcams to hook a hot wire from the hot terminal of your battery to the starter and seeing if it’ll start.
How many of you think he sounds like Robert Downey jr😂.more at the beginning of the video. Great video though.
Hello. What codes were you getting? What symptoms you had? What codes were you getting? DId you have immobilizer issues? Thanks.
No codes, crank, no fuel, no spark, I think. It was years ago and I don't own the car anymore.
Hello. I have a problem with my Audi a4 b7 1.6 petrol. Sometimes the car starts and sometimes it doesn't, either hot or cold. Without any logical reason, it won't work and then it works and everything is ok. advice please. Thanks a lot in advance.
With this blown was it not starting the vehicle a lot? I've looking into picking up an a4 1.8t and a few of them are saying they have fuel pump issues. I'm now wondering how common this issue is and if it's actually this and not the fuel pump. Any thoughts?
I bought it not starting. It started once and ran shitty. Then it never started again until I found this. I'd say take some engine starting fluid with you. If it's only the fuel pump, it should start on some spray. If it never even attempts to start on spray, then the ignition is out for some reason and the relay could be one of them.
My comfort control module got wet I replaced it and Horan windshield wipers turn signals windows convertible top all don’t work Fuses are still good what could be the issue
SOLVED AUDI A4 QUATRO 2.0 I WAS ABOUT TO BUY A ECM, UNIT,, BUT TRIED THIS,,, REMOVED COVER OF ECM, LIFTED IT,, REMOVED RELAY IN THE MIDDLE OF THE 3,, CLEANED IT, , THEN CHECKED THE 5 FUSES THERE,, ONE WAS BURNT 15 AMPS, I PUT NEW ONE,, AND TRIED ENGINE,, CAR STARTED NICE,, LIGHT ECM OFF,, AND ALL POWER IN ENGINE AGAIN.
How do i clean it i have a 2002 audi a4 1.8t but the transmission jerks and has a small hesitation untill the transmission is engaged im getting tired of it because it died on me a few times on the highway
Good video, good commentary
So did it end up starting after replacing this relay? I keep reading that relay just controlled the fand
Worked perfect after that relay.
Awesome!!! Ordered my relay Saturday. Just waiting for it to get here
Thank you for sharing one day maybe useful to know
Respect
Nice diagnoses
I have the same car like your. my ABS light on. i change on the left front. i change the sensor clean the connection. still sometime light still on sometimes off. what you think is the problem on it. any idea? please help.
What lead you to believe it was the left front sensor? Did you re scan after for more bad sensors? It could be a bad or dirty sensor, or a bad abs pump. Not sure without doing diagnostics. I have an abs light on right now on my 02 all road because I was swapping ecu's with power on. I'm pretty sure I just have to reset it.
Hi, thanks for useful videos.
l have a question
While I was driving my Audi A4 2001 has lost elecric power that means no power at all. alternator is ok and the battery has enough power. what could be the issue.-''
Thanks
Do you mean electrical power to the interior of the vehicle.
@@russellp73 yes i do
Has to be a main battery cable going into the fuse box that feeds into the interior. Try testing all the fuses under the hood. Look for burnt wires. I don't have the car anymore but I fdi have a 00 A6. I just don't have the wires memorized right now. From the positive post there should be 2 cables. 1 goes to the alternator / starter. The other goes to the main fuse panel under the hood, then to the interior
@@russellp73 Thanks 4 replies. I did check t he fuses were OK, but when took off the cable of the battery then I saw the terminals of cable very old and rusted, after cleaning it the problem has been solved.
I'm waiting 4 more videos of u.
Thank you for helping me.
Quick question, I have an 08 Audi A4 O realize it is a little different than your vehicle in the video. My "ECM" light turned on and is having starting issues and losing power, the relay "219" in your video says its a fan relay when i research 219 relay... My question is if I purchase an ECM relay would it be in the same location? I'm guessing thats the issue because upon researching on forums it seems to be that ECM relay.
I don't know if it will be in the same location. Never heard of an ecm light. Do you mean check engine light? What kind of starting issues? Describe them. Not starting? Running rough? Extended cranking time?
russellp73 im sorry i got thrown off cause the ECM relay i was talking about. its the "EPC" light. It's hesitant to start up, feels sluggish, loss of power, it wont exceed 20 mph.
I haven't had an epc light problem yet, however a friend of mine did, and it turned out that he needed a new throttle body position sensor. Google epc light causes. It could be other issues too but his bad throttle body gave him low power symptoms too.
russellp73 Okay cool, thanks a lot
Sound like a sailor bro lol nice vid
😂 Just a mechanic.
Hi I have an 2003 a4 won’t turn over and has no spark tried starter fluid before I knew I had no spark from my coils could this be the problem
It could be because it Powers a computer and a few other systems on the car
Having same problem after engine swap. No spark. Real headache
where do i buy the fuses that isnt online i dont want to wait a week unless amazon prime sells them & ships them in 2 days. maybe advanced auto parts or autozone??
Fuses? Any auto parts store. Relay? Audi dealer or junkyard, possibly an auto parts store might carry them
I have a question that relay .. how does it work in the vehicle? Ecm..???? my problem is .. my car does not start fast .. the engine has no power .. I have the code p1338 camshaft pos. sensor .. replace it .. but still does not turn on instate
I'm not sure. I insisted that it was for the ecm. Others insisted that it was for the fans. I know that my car didn't run and my fans ran on high non stop. As far as your problem, did the code go away? Did you run it long to see if the code came back?
www.theturboforums.com/threads/any-audi-vw-guys-p1338-is-kicking-my-rear.385113/
Have you done research on this code where others have solved their problem? Basically, in the link I sent, the guy was having problems with this code that weren't going away. Found the pin on the crankshaft pulley was sheared. I'd check all mechanical items and confirm your timing belt alignment.
let me check this link you sent me!!!
Hi, for the medium and brigh lamps not working what is the relay? Thanks.
Idk. This is about wipers
my car starts and runs horrible got water in ecu box fan turns on wen i touch the relay have tried several ecu could these be my problem
Yes. If touching the relay changes something like turning the fan on, I would change the relay. Also, do you have the original ecu? How is it starting on another ecu? Is immobilizer disabled?
immobilizer is off on the tuned ecu but stock ecu is in now and doing the same
thing
Do you have codes? A vagcom? Dig into other stuff. Do all the coils have spark. Do all the injectors have pulse.?
I had the same issue, I end up using contact cleaner, tooth brush, air compressor and nothing. So I found a relay in a junk yard and fixed.
What other options have you looked at that could be source of the problem other than the relay
Ash Arias well it needs power to the ecm which is the relay. It needs spark from the ecm so check the wiring at each ignition coil. I hear the wire insulation rots off. Google no start issues and read some articles. There's too much to put here. Also you need fuel. So spray it with starting fluid and crank. If it runs for a few seconds and shuts off, you know 2 things. 1 you have spark, 2 you don't have fuel. If you spray it and it won't start, you don't have spark. That's either a coil issue or the ecm doesn't have power which is the relay in this vid.
russellp73 is the ecm rely the same as the fuel pump relay?
Hi ...i ve same car ....but hot color don t work...please can you tell me wich relay have i to change ....thanks
I don't know what you're trying to say. You're going to have to Google some solutions
Did the car start at all or did it not start at all? Trying to figure out why my 1.8turbo wont run as it should. Starts some times and then dies... changed cam sensor and air mass sensor
It would rarely start and run good. If it started it would mostly run like crap or not start at all
Do you have a check engine light or a scanner? Maybe Advance Auto or AutoZone can pull the codes for you and give you a direction to go
russellp73 i have scanned all the codes but im not getting any codes that would cause this problem (i think). I got one fault on cooling fan (short to ground) and a fault on throttle valve but that moves as it should. I am starting to think that its the crank shaft sensor that is bad even tho there is no fault present
My cooling fan would not shut off when that relay was bad. Something in it controls the ecu and the coolonig fan. Or the ecu controls the fan and because the ecu was getting iraddic or low voltage, the fan would run. Will it start on spray start? You need, 1-spark, 2- good fuel. I stress good fuel because I've had a recent bad fuel problem and I've heard of diesel contamination from others. And 3- timing. If spray start starts it, then you have spark and no fuel. Check to see if you have spark and also see if the injectors are pulsing. Most auto parts stores rent noid lights kits.
You can also open the fuel pump relay and see if it moves when you crank the engine. Then you know it's getting signal to supply fuel. If it doesn't move, you can activate it by pressing the terminals and listening for the fuel pump to run, then you know the pump is actually running also.
water got into that box and caused a short
How can I fix that please I’m anxious as fuck because my car literally did this yesterday water got in
Just get an OBD scanner took me 2 min to diagnose - still looking for the relay though
polla2256 except that it didn't set a code because there was lack of power to the ecm. It couldn't diagnose itself.
russellp73 ah interesting, mine managed a scan with the fault present but it was just a dry joint on one contact. Quick solder and job done.
What code did you get?
What is that light at the gear shifter that looks like a foot? Mine keeps blinking i have the same car same year. My car want turn over at all and hazards keep blinking even tho ive tried to cut them off they blink faster when on
It's a foot. It means press on the brake to shift out of park.
I don't have the car anymore. I'd Google or CZcams your hazard symptoms. Somebody can help out. I don't know what it is.
@@russellp73 okay thanks buddy
@@stevenclark848 did you fix the issues causing your hazards to keep blinking? I am having the same issue but can’t figure out what’s causing it.
Hello I have same problem I replaced the 219 relay still no start old one was corroded an ecu box had water in it I noticed relay 369 sounded as if something is loose inside it an it’s corroded also could that be problem wat is relay 369 used for? I tried starting fluid still nothing just cranks but what start how to tell if ecu is fried?
If the ecu is not wet then it's probably OK. The rattle inside the relay means it's probably bad. One relay runs the secondary air injection motor (Google audi Sai relay) and the other relay runs the ecu and fans
, how corroded was the relay and socket? Maybe your socket terminals are so bad that the new relay still won't work in it. Check that or try wiggling it around while someone else tries to start it
If starting fluid doesn't work then you have an ignition problem. Do you have a scanner to read codes?
Ecu box isn’t wet but there is a lot of corrosion on the inside we’re I put the relays I’m going to replace relay 369 tomorrow cud that relay cause a no start because I opened it an it’s broken in the inside
Had this problem before but I just replaced 219 an it started right up now after replacing 219 it still does the same
I would like to know did your lights on your dash work , my A4 when I turn the key there is no light or door dinging at all
Yes, they worked
So you have no power at all? No dome light? Headlights?
So I have headlights, interior lights, and mileage and date and time, nothing in the center
@@omniwholesale4483 Hello! Did you managed to find the solution for this issue?
@@claudiugurita5005 Same here, would appreciate it you share! My car starts then dies one second later, no lights in dashboard but all other electronics working. Can't be a coincidence...
Isn't that the fan relay? I have a 3.0 and mine cranks but wont start. Fuel at the rail but no spark, no injection.
Teegan Paulin no. It's the ecu relay
russellp73 I keep finding different information on this. While I was trying to remove it, the fans kicked on. Any way it controls both?
Teegan Paulin possibly. My fans would run when it was messed up. They worked right when I put a good relay in
russellp73 I installed the new relay, fired right up! Good advice!
Teegan Paulin awesome. Love it.
I'm having problems after I changed my timing belt on my 1997 3.7L A8 it cranks but won't start it has fuel and compression it's not getting any spark all transmission lights are lit up and my fan was coming on with the ignition do you think there are relays like this under it's ecu its in the same spot
Hard to say. Did you just do timing, as in not disturb anything else? Is the timing right and not disturbed while doing the job. Maybe a cam sensor was not plugged in? But it should still start. I've never worked on the 3.7. Not sure where all the components are. Are there any codes stored now? Crank sensor should be plugged into the rest of the harness at the firewall. If it's undone, the engine will not start.
@@russellp73 yes we did timing belt and water pump as the seal on the old water pump was leaking coolant. We used the proper audi tools in the back of the engine to hold timing and set it perfectly and it returns to the same spot after turning the engine over. Cam sensor and crank sensor resistance all check out ok all ignition coils test ok. My father and I are at a loss with what to do.
@@MarshallSambell which engine? Are you working on a 1-8 turbo? How have you confirmed no spark? The fastest way to see if you have spark is spray some starting fluid into the air filter and if it is a turbo remember it's going to take some time to get that starting fluid through the turbo ducting the intercooler and up to the engine before it will fire
I forgot which conversation I was in. I see you were working on a 3.7. You met inbox me to have a more detailed conversation if needed
www.audipages.com/Tech_Articles/enginemechanical/tbreplace0.html
Try reading this and make sure you didn't miss anything. I don't know what to tell you, except confirm timing marks. The tools you used locate the cams so they are in time. There are no timing marks on them. The crank should be held in time with a crank locking bolt. Other than that, check all plugs that may have been undone. Also, what do you mean all the trans lights are lit. PRNDL? GEAR Indicator lights?
Hello...the fan of a/c dont starter when tur on my a/c ...cant you help me thenks. ..
Is a audi a4 1.8 2007 thenks
Awesome thx u
What is that cover called. I'm missing mine and looking to buy one
www.ebay.com/itm/174577433441
Ecu box cover. I just went to the junkyard and got mine.
Check your year!
I have same model but sometimes start sometime no... do u thing that's the problem on my car too?
I have an A4, 2007, 2.0T and my wiper cowl is broken. The car reacts the same. It starts sometimes and then when it get's wet, it wont.. Long cranks and it refuses to start..
Hi, did you manage to solve the problem? I have a Passat B 5.5 1.8 T and I have the same problem, five days it turns, and then it won't
Where's the engine control relay located?
That's it. Unless you need something else, idk. I don't own the car any more.
I have this problem in my screen audi A4 2021 The screen didn’t respond to anything at all for about 15 days I go to the service center they take the car for 3 hours and they cant solve it then they take the car and said that it will take about 30 days to solve the problem my car is brand new I bought it for only 4 months why should i wait a month to solve this problem please i need a help
What screen? No clue what you are talking about. It should be under warranty.
and was on my fan but after my fan won't turn on.... Idk why...
Did that issue display an EPC issue by any chance?
No. The ecu was losing power and couldn't diagnose itself
I had a friend with an epc one time and it wound up being his throttle body. There are a few causes for epc. I would suggest Google epc with your symptoms
russellp73 thanks for the reply. My starter relay is jacked up but imma have to wait a couple of days I had to order relay from the dealership. It won’t start and it has the EPC Brakes and check engine.🤞🏽
Where do you buy it?
Got it from Harry's u-pull-it in Hazleton PA. It's a junkyard
www.partsgeek.com/gbproducts/SC/7480-08059699.html
This looks like the "219 audi relay"
Some sites call it a fan relay, which my car had symptoms of. But it would also not start. This fixed both issues
Bro, I changed that relay because the fan wasn't turn off but now the car won't to start, idk what happen :(.
Immediately after change the relay the car started, obviously, but now after 3 days don't start anymore
Was the relay new? Try another one
@@russellp73 I founded the issue. It was on the Switch of the Gearbox, and started on neutral.
What switch on gearbox ? Im having a problem to
@@thcarr5053 yea what switch on the gear box
sorry to bring up old thread but does any1 know where the ecu is located on an 04 a8l
Usually at bottom of windshield on driver side
I wanna 2 know where is the relay on audi A4 ..2005 ...
Will this cause the injectors not to pulse?
Not sure. It is a good possibility. Try starting spray first. If the ignition system is working, then the injectors should too. Unless you have a bad cam or crank sensor. If you have a scanner or tach, see if you get rpms when you crank.
@@russellp73 i changed both, the rpms go up when it cranks. I'll try to get it started again. Thanks man
Changed both what? Did you get it started? You'll have to use alot of spray to get through all the turbo piping. Have an assistant pulse spray while you're cranking. If the ignition system is working properly, it will start. If it starts, then you have a fuel issue.
@@russellp73 relays, might be a fried ecm. Rpm works
Any part number for the relay?
All I can see from the vid is a 219 on the back. I don't own the car any more. Vemo muliti purpose relay on fcp euro # 443951253AA on a quick Google search of "audi 219 relay". It's not the OE #, but it's a lead.
@@russellp73 thank you 🙏🏽
It's under the ecm
my fuse under ecu blowing 25a of Audi b7 2005 what can be the cause guys plz help
Elizabeth Bamm that fuse powers the secondary air injection pump. The pump could be jammed or shorted. They are known for it. Check the pump motor. It's a motor with a fan on it. It will sound like a vacuum cleaner if it runs right.
I have a question it's the the GPS from the car right
Matias Arrieta I have no idea what you're asking
theres a drain plug under ur battery make sure its clear so water can drain if not thats what happens when it fills with water........ left my hood open 1 day heavy rain yea came back to a pool were the battery is located a4 b5 and a4 b6
I have a 1998 Audi 1.8t automatic and I have no relays in that box does anybody know where it would be any help would be much appreciated?!
Hmm. That's odd. I had a 98 2.8. I don't remember what was in there. Google the relay # for that year.
Under the steering wheel
@@enokapoi2985 witch one ?
No started Right up.!!!
I havr clicking sound my car won't start is it the starter because I can power up thr car with cables from batterie to batterie no problem idk now
If you can jump it with another battery, but it won't start on its own, then it's not the starter. The starter starts the car. The battery seems weak and with an additional battery and cables, it starts. Sounds like a battery unless you have a bad alternator. Is the battery light on when it's running? Do you have a voltmeter on the dash? What does it read? Running voltage should be at minimum 13.5 volts.
@@russellp73 I can't see anything on voltmeter I have an Audi a4 2010 ultra edition , My lights are flickering when I put the key in and the dashboard goes light and shuts down , the power just goes on and off on everything and it makes a clicking sound when trying to power the engine , I hope it's a batterie issue because that's a cheap thing to fix I will have to check the batterie tomorrow at a shop
@@drlu3823 sound like battery or maybe a dirty terminal. Do they look clean or nasty? Are the terminals tight?
@@russellp73 The terminals are really good because they are on the back of the car it's like brand new , they are tight btw
@@drlu3823 what's the voltage on the battery, not running. Good batteries are 12.4 v min.
Can ecu relay cause no spark no fuel condition.
bruce kangwa yes. The ecu controls both of them, and the fuel pump
Hello my name is Edwin I got a 03 Audi 1.8 turbo I got the same problem you used to have on your car I don't got most Park the fuel pump is not working do you think is that relay can you please help me thank you I appreciate
Ed Rivera. Spray it with spray start and see if it starts or tries to start. Then you know you at least have spark. If you have spark, then test for voltage at the fuel pump. There's an access panel in the trunk. If there's voltage there, it's the pump. If no voltage, then you are missing power to that system which could be the ecu, ecu relay, fuel pump relay, various fuses.
russellp73. Hello this is Edwin the Audi don't got Spark I try everything my question is do you think about relaying maybe cuz the problem I don't got no spark and the fuel pump don't work thank you I appreciate any help
Bonjour il faut remplacer tout les relais viens de l'eau de pluie trou tablier bouché eau ne s'évacue plus relais inondé débouché le trou
I'm having the same problem on my 03 a4 1.8t , watched this video.over and over again , only thing is relay 219 is engine coolant pump module , replaced it still no power to fuel pump relay, I have power at fuse 29 which is connected to coilpacks but fuse 28 and 34 no power unless I jump it
tarks dazz www.passatworld.com/forums/b5-garage/512914-2003-passat-1-8t-crank-no-start-no-power-fuse-28-29-33-34-ecu-pin-3-a.html
tarks dazz check all your fuses especially #7 for the abs. It feeds other fuses. Also spray some starting fluid in it and see if it will run for a second. If it does run then the ecu is doing what it's supposed to and the problem is in the fuel system. Checking for voltage at the fuel pump will confirm a bad fuel pump.
Computer
thats the fan relay not starter relay
But it messed up alot of things, including starting. When I replaced it, everything worked.
Complete ass took me out 😂😂😂😂😂😂
Wher did you buy new relay
got a used one at the local junkyard.
russellp73
Thank you very much
That relay doesn’t look like any ass I’ve ever eaten.
I’m having the same issue right now with my 2012 S5. Not getting power through the ECM. Checked power and grounds and everything is good up to the ECM. Scanner communicates with every other module but the ECM.
enx i get it
Iron man??
4
They dont open easy at all
That is a Fan Relay
It's the ecu relay. I don't care what it looks like.
Lol bro im an audi technician relay 219 is a fan relay you have been misinformed.
K. Car won't run without it. So.... Been driving and working on audis since 1996. No professional audi training but was a mechanic for 8 years. Most of my audi experience has been on my personal cars since I did fleet maintenance on American cars mostly.
82 coupe GT
86 Coupe GT
88 audi 80
93 audi 100
94 audi 90
96 audi a6
98 audi a4
00 audi a6
02 allroad
03 audi a4
All I'm saying is that my car didn't run without it and when I replaced it, it ran fine. Whatever it is, it runs more than just the fan.
rudeboy8g7 ECU relay 😒😒😒
Please urgent
Comment here all you want. I'll try to help.