Fiat 500 and FCA Brake Light Switch Replacement
Vložit
- čas přidán 23. 08. 2024
- This video shows how to change the brake light switch on FCA vehicles like the Fiat 500 and Alfa 4C. It is also similar to other FCA vehicles. It twists from the 11 O clock to the 2 o clock to lock into position. Then pop the connector on.
Sorry that this video may appear 90' off.
Thank you sir
Thank you! This is the 3rd video I watched & helped us to change this part!
Thanks, helped me loads with my Punto Evo!
Sadly, it did not fix my Hill Holder / ABS / ESP / Intermittent Light not working warning (despite of it working fine).
On to the next possible fix. Dad suggested ABS ring of sorts - and that it should be a cheaper fix if so. Also read that it might be the power steering - which has cut out twice in the last two years or so (at low speed).
Suggestions are most welcome though, should you happen to read this comment :)
Hi, did you solve the ESC, hill holder etc. Issue and how ? Have the same problem.
Great video! 👍 Very helpful
Will the lights turn off instantly?
Thanks a lot! Does does it need a laptop or software to activate The new switch?
Are those tiny black tabs on the switch supposed to brake when installed?
Did that twice, didnt work.😢