John Deere / Brinly 42" Lawn Sweeper 2 Year Review & Gear Cleaning
Vložit
- čas přidán 11. 06. 2022
- 2 year in depth look at how the John Deere LPSTS-42JD / Brinly STS-426LXH Lawn Sweeper is holding up.
Forgive the sniffling, hard core allergy season during this.
**DISCLAIMER: THE CONTENT IN THIS VIDEO IS NOT BEING INSTALLED BY A JOHN DEERE TECHNICIAN AND I AM IN NO WAY GUARANTEEING THAT THE INSTALLATION OF EQUIPMENT AS DEPICTED WILL BE COVERED UNDER ANY WARRANTY IN THE EVENT OF FAILURE. I WILL ALSO NOT BE HELD LIABLE FOR ANY DAMAGE OR INJURY TO YOURSELF , OTHERS, OR EQUIPMENT DUE TO THE USE OF THIS CONTENT. THIS VIDEO IS FOR ENTERTAINMENT/IDEA PURPOSES AND SHOULD ONLY BE USED AS REFERENCE AND NOT AS A REPLACEMENT TO ACTUAL TECHNICAL DATA.**
***NEW!!! JGG on Facebook here:
www.facebook.c...
Follow for updates on builds and to see what’s going on!***
**Now you can reach me by email @ joshsgreengarage@outlook.com**
If you have any in depth questions, need to send a picture or video of a problem you are having, or want more info on something you saw me do or make, feel free to send a message! - Auta a dopravní prostředky
I have had the Brinley branded version for about 5 years. Have an acre lot with lots of trees and mainly just use it in the fall. I have a mulching deck on the mower with the discharge covered so can use the sweeper while mowing. I run the mower when picking up leaves so it mulches them and the sweeper picks them up quite nicely. The mulched leaves take less space in the hopper so don't have to empty it as often.
The hopper gets heavier filled with mulched leaves, so I mounted a pulley where the rope attaches to the hopper. Run the rope through the pulley and run both ends of the rope to the mower. With one end tied to the mower, gives a 2-1 advantage in dumping the hopper.
Good honest review. Thanks for sharing
Good informative video Josh , keep this item in mind
That keyway on the back of the small gear, and the small gear itself can be wear items that I see in other videos. 👍
👍🏻 🙋🏻♂️ 3-25-2023 🇺🇸
As for the edges where it’s beginning to become unsown, you can fix it with black zip ties. I believe all of these sweepers , you have to get off to adjust the height. I have a craftsman model that has the adjustment next to the right wheel with a lever.
I had a C-Clip come off on the inside of one of my wheel pins. Hopefully this isn't recurring.
As far as storage does it collapse ?
Yes, the hopper can be collapsed, and then you can lower the lift lever, and tilt the hopper all the way up. It saves some space, but this is still a large tool… nature of the beast!
Thank you, Josh! I'm trying to decide between the 42" and the 44". Besides the obvious 2", what are the differences and why is the 42" more expensive? Thanks!
I’m not too sure of other major differences, the only real one would be the hitch setup, much simpler on the 42, and I’d go with that one regardless of price. Cost difference could be just manufacture, 44 is agri-fab, 42 is Brinly.
Do you have a part number for that mesh cover on top ?
R2420. It is the whole hamper too.
I never hear anyone fabricating a PVC slider and attaching it under the bag frame... Several lengths of small diameter PVC pipe (1/2 inch) under the bag would eliminate the wear and tare from dragging! First thing I would do with mine.
I definitely like mine but I tow mine with a zero turn
Time to get out the Duct Tape.
TMI😂