MoYu Weilong WRM v10 Detailed Unboxing (All Versions)
Vložit
- čas přidán 11. 09. 2024
- In this video I unbox all 4 versions of the new Weilong WRM10. The feel is quite unique depending on which version you get, so make sure to pay extra attention to this!
In particular the regular core versions are reminiscent of RS3, and the ball core versions are more similar to the v9/Super Weilong combined.
They also implemented a new tensioning system which left me clueless in the video. Upon further inspection it seems similar to that used in the Tornado in which one direction adjusts the tension and the would be the magnet strength.
Yes! Finally Moyu implemented the tensioning system that allows you to have perfectly equal tensions on each side without spending hours on tensioning your cube properly. Major improvement over the previous versions, screw the screws! Turning the white circle right makes the cube tighter, turning it left changes the compression. The other round ending on the tool is for removing the blue nut and thus taking the center off. The system is similar to the one in 356XS and Tornado v2-v3 and it's pretty intuitive.
I've never once had a moyu cube take me hours to tension.
But like, what part of the tool reaches the actual tensions?
@@FriskyPotat0 If you're talking about the "cog-like" wheel at the bottom it's just to indicate the tension you set. You adjust it by turning the white part as Antoine did. Turning counterclockwise adjusts compression( just like in previous moyu systems), turning clockwise adjusts tension.
@@Mati1242 ohhh ok… hope there’s some specific info on those pamphlets in terms of how to know what tension you’re at (as if the bottom cogs stay still and the top circular thing with the two notches is moving left for one thing and right for the other, how you’ll know what number tension and compression you’re at)
@@FriskyPotat0 If you look closely at 14:33 you can see that there are two little, pointy notches on the center itself pointing inwards. The cog wheel turns when you change the tension and whatever number on the cog aligns with these notches is the tension you're on. Super easy, I'm surprised Antoine hasn't been able to figure it out :D
RIP to the GTS3M Dual Adjustment System.
Press F to Respect
F
F
F
F
F
by my observation, if you turn the new adjustment setting :
1. Clockwise, it will change the magnet/spring strength settings (rotating the bottom part of the mechanism, pushing the "floor" up like the old mechanism)
2. Counter-clockwise, it will change the "screw depth" settings (rotating the top part of the mechanism, controlling the "screw limit" like if you tightening the screw of the old mechanism)
yeah! i can see when he turned the thing counter clockwise it turned the sprocket! an adjustment like the v3s
Everyone is complaining about the adjustment system
The fact that everyone has also been complaining about moyu not updating their adjustment system
Personally I'm fine with any adjustment system as long as I can figure it out intuitively
at first glance it looked like a copy gan system thats why i personally complained about it
after know what it was like i think its fine, i kinda prefer the old one tho
@@inseminggd9435 i do think screw and compression system is much simpler too lol
@@inseminggd9435Yeah but even if it was a copy, so what? That just means they wanted to replicate a good thing. And that, is an improvement. I hate the fact that I need to count the threads on each screw when I reassemble my RS3M V5 to make sure everything is adjusted evenly, and it never is 😑🙄
@@fohrum4757 yeah it would be an improvement but you know what else ir would be? plagiarism
moyu has copied many things from gan these past few years. they copied the uv coating, the edge repelling magnets, even the magnet adjustment system, which already is pretty sketchy but sure. but if this was the same as well, that would be the last straw imo
@@fohrum4757exactly, like these companies are literally copied original Rubik's Cubes, idk why people complain when other companies copy other innovations.
MoYu made the first MagLev cube by releasing 2021 versions of the RS3M 2020 and WRM 2020. This makes GAN and other company a bunch of copycats.
I'm pretty sure 3:15 is the screw depth/tension setting. So there are 8 settings for tension and 8 settings for spring/maglev compression
The way it works is like the tornado adjustment. Clockwise is one adjustment and anti-clockwise is the other. You can see at around 15 minutes sometimes the orange dile moves
Seems interesting. But I'm too in love with the V5 for two handed and YS3M for OH to switch mains any time soon.
Ain’t no way bro uses v5 for 2h but not oh lol
Haha. I like the smaller size of YS3M for OH and the lack of UV coating. UV coating feels so slippery when I do OH for some reason.
@@Anthony_JiangI actually like the V5 for 2H a lot more than for OH as well
@@Cubinginatree fair enough, i dont agree but i see your point there
I have ys3m and v5, I currently just main ys3m but I ordered a wrm v10 (bc no maglev) because it was only 23 bucks so I guess I'll see what it's like soon-ish. can't wait.
I thought MoYu was going out of business, they havent released a 3x3 in an entire week!
That mechanism is VERY AoLong to me.
dude i love moyu im so excited to buy the wrm v10
"flagship puzzle for 2014" 💀
Bro lives 10 years in the past 💀💀💀💀
I really wish they would do like GAN and offer every version in frosted or UV. I like frosted better and ended up getting a regular frosted V9 and swapped the pieces out so I could have a frosted V9 ball core. This looks super exciting and I hope it is not like the Super Weilong, I just don't really like the feel of the Super Weilong, no matter what lube I use it gets really gummy after a day or two.
Im really excited for this cube
Bro, how do you get these cubes before EVERYONE? It was also the same with the Meilong V2
he is a moyu employee
@@StevenWintringham oh, that makes sense
Basically because I'm sponsored by MoYu, but also get next day domestic shipping instead of having to wait for longer international shipping like most on CZcams
How could they have changed the already perfect dual adjustment system????
Fr
There's no reason for using a system that's been used for *5 years* since the GTS3M. Of course, if your still prefer older Moyu cubes, that's completly fine on your part. But I prefer to buy the newer ones.
Literally how was it perfect? Now you can actually get the same tensions on all sides without trying for ages
@@notyou8508 okay, true
well, with that system I could never tell which screw depth was good, and never know if all the faces are actually the same 😔
which is better Ys3m 20 magnet or this one?
Love the mousepad bro where can I buy ?? Nice video btw
The cubicle website
there is no way, I just ordered the v9 like 3 days ago 😭 if I just knew
It still might be a better choice than this
@@pengusplayz5756 this
@@pengusplayz5756we will see i guess..
cancel it!
@18 seconds. 2014? 🙃 Moyu make great solid cubes without too many gimmicks. No screw versions will be interesting. They really need to update their smart cube and app though, it's 2024! 🙂 👍
so no double tracks anymorer??? Btw, whats you settings in your wrm v9 20 mag?
I like that they made a dual adjustment system that doesn’t require the screwdriver. However I’m not a fan that it’s more like GAN’s - as I much prefer the color coded and finger adjustable QiYi X-Man Tornado (V3) - although my mains last year shifted between GAN 14 and the original WR-M V9 (the latter has been my main for all of 2024 so far).
Last tensioning system was great, it did not need to change
it very need to change the last one is bad,you cant get equal screw depth
@@Meltizp if you can’t get it about the same then maybe ur fucked for basically every other cube, I prefer to have infinite possibilities instead of only 6
@@din6518 lol i have ocd + you wont get it the same neither+no1 cares that much abt screw depths
@@din6518It's nice having a wide range of tensions but being to easily have the same tension on all sides is far more important to most speedcubers (especially those who want to have the exact same one without having some layers feel a wee bit tighter than others).
@@MaximilianBerkmannYou can use the caliper
Which do you like more, the 20 magnet spring or the 20 magnet maglev ?
How is the feeling of this? Is less squishy than the v9? And what's is the size
Do you prefer the ball core UV with springs or maglev?
They changed how the center caps fits on the piece now I think it would be a pain to take off just like gan cause it seems like the same design and holes in the corner piece is very familiar
This would be their flagship for 2014.
2014?
Is ot better than tornado v3 flagship
at 13:53 there's is LITTERALLY an instruction manual on how to use the new adjustment system, I have NO IDEA how you DIDN'T see that. and here's you complaining that you don't know how to adjust the cube when the instructions where in the box the WHOLE TIME!
Haha yeah maybe I should have taken a look xD
I’m annoyed they changed the perfect dual adjustment system
Haha
im not annoyed that they changed it, im upset they changed it to a blatant copy of gans
@@inseminggd9435 if you're pissed just stick to screws
@@iiluminiac6217
Alright, screw the ne-
(I have no idea what these people are yapping abt btw)
I hate old adjustment system. I hope this is better
yo where did u get ur mat that says oll and all?
Which version do you like the most?
The adjustment system looks very similar to Han’s hope I’m not the only one
So which is the best version?
Lets go the 1milionth cube moyu lauched
The magnet in the edge are smallest than de v9, and the core is bigger
Are the center caps identical to the V9 center caps?
Not quite. 9 fits fine on the 10, but 10 stick out a little if you out them in 9
@@antoineccantin Thanks for letting me know!
you mean 2024 not 2014
Is it faster than V9?
Manual?
Missed oportunity to do theweilong vVV
Is the standard magnetic one quite good, without the maglev and ball cores?
Yeah, to be honest I would just say it have a different feel, not necessarily better or worse.
@@antoineccantin What is the difference? I like smooth and fast cubes (that are still controllable). My current main is the Moyu Weilong WRM 2021 (the standard one not the maglev one)
@@lucktheduck5407 In that case, I would say the ball core version would probably be a bit better for you. The non-ball core is more cripsy feeling.
@@antoineccantin I got the ball core spring version and it feels nice but it won't even corner cut 45 degrees. Lowest tensions and springs. Not sure what's wrong since none of the reviews complained about corner cutting.
Where did you get the mat?
MoYu sent it to me!
The uv maglev says malglev on the side of the box. Did I get a rip off?
Maybe I misunderstood, but it sounds normal that the product's name is on the product's box?
@@antoineccantin Pls read my comment again.
Also the tool guide that explains how to use the wand, shows something about changing something with the corners. There are no levers to adjust so what does it mean to say in the guide? Any ideas? Btw love your channel.
@@RassinNL hmm, that's a good question. To be honest I didn't pay close attention to the guide, and I'm away at the moment so don't have access to it. However, I didn't notice anything adjustable with the corners...
@@RassinNL its because it's the same manual as the super weilong which DOES have a magnet adjustment system in the corners. It's like Gan, they rycicle the same manuals but Moyu at least uses the correct manual for the correct tool unlike Gan that sometimes puts the manual for older tools
Are the wrm v9 centre caps compatible with it?
Yes
why does it look like a smart cube mechanism?
I was thinking the exact same thing lol
2:10 Do you have a better picture? I can read Chinese
Size of it?
price?? where??
I literally just bought the V9 a month ago, my first new cube in almost 2 years. Would you/anyone recommend getting this also, or there's not enough of a difference (other than the adjustment system of course)?
Don’t upgrade. V9 is great , v10 is the same thing with a different adjustment system. There’s nothing wrong with the 9s adjustment though.
Don't buy this, the difference isn't really worth spending more money. v9 is enough
They are all 55mm like the v9, right?
I think 55.5mm. You can check on the cubicle.
Are you sponsored by Moyu?
The piece design of the V10 is almost near identical to the Qiyi M pro 3x3s
Which i have and i dont like qiyi mpro
moyu just skipped maglev and went on to make controllable cubes wow and idk (edit: i just made it to the maglev ball core part so i think still maglev)
But the older adjustment system is great
Read the pamflet
Standard one is just the v5
moyu your learning yyayyayaya
i thought moyu died when they didnt release a cube in a month
Noway😂😂
😂 Their flagship puzzle for 2014
Bro I just got my v9
Once again moyu has copied gan this time with the tension and center travel adjustment
Bro clearly haven't tried a Tornado V3 before...
edit: typo
what baffles me even more is that he didn't even think about looking in the box for instructions on how to use the new adjustment system.
He's sponsored by MoYu so it makes sense that he hasn't tried it (or any cubes from competitors to MoYu).
where did you get it from?
MoYu sent it to me
Guys theres barely any autoalignment very disapointing
That's weird, many reviewers stated that its autoalignment strength was in the stronger side
Yoooooo
omgggggggggg
ahh sh*t...
*here we go again*
F