CHEATING DEATH & BROKEN JEEPS - Off Roading in Moab!
Vložit
- čas přidán 13. 04. 2024
- Nothing gets your adrenaline going when you're off roading with your friends like Jeeps with broken engines, broken transmissions, broken transfer cases...Oh yeah! And, of course, cheating death once or twice!
To check out more Lite Brite Nation content & merch, click here → linktr.ee/litebritenation - Auta a dopravní prostředky
![[柴犬ASMR]曼玉Manyu&小白Bai 毛发护理Spa asmr](http://i.ytimg.com/vi/0TsXQ7z2Dh4/mqdefault.jpg)
Ok..the stock wheelbase TJ and the YJ are the stars of this video…nether were skeerd!
Ya they absolutely killed it!!
I was thinking the same thing. Everyone else was being sissy’s. Lol 😂
0:16 haha. The first annual, big tire garage, TV CZcamsr influencer selfie stick android iPhone Moab Trail extravaganza ride. Yeahhhh!!!!
33:20 thats the kind of popping up a ledge that you think back on when your wondering why there's a new noise or broken part.. amazing none the less
8:54
Lots of guys want the "whole Brittany experience "!!! Ian
🤣😅
Too many electronic gadgets…. Great Video!
Step 1 : always clear all codes! Glad you got it sorted out and it didn’t ruin your day.
Just want to say thank you for not over exaggerating the steepness of some of these trails…. Have seen some videos (not from yall), where they angle the camera to make it look even worse than they already are. Great video. Come on out to AOAA for some fun!!
I did Pritchett this year and the obstacles are way steeper IRL than on camera. Glad I was with an experienced group.
@@GarageGeek I’m not saying they aren’t steep, I’ve just seen videos where people make them look almost vertical and you can clearly see people standing straight up on the side of the obstacle that’s being portrayed as steeper than it actually is. I’ve noticed lite brite doesn’t do that, and they show the true steepness of the obstacles.
I do my best to capture the angle of the obstacle without over exaggerated it. ☺️
This is a huge problem is RC rock crawling too angled cameras to exaggerate the angle. Im also glad this channel doesnt do that.
💜❤ Very cool! Great seeing ya'all on the trail! Thanks for adding that lil clip of me at the beginning!! 🤘😁 I'm Stoked!!
Ian is Mr Fixit. Brittany is master spotter. Always enjoyed Pritchett canyon.
37th: late again. What a great trail title and beginning! Fantastically beautiful area, unless one prefers trees. I hate electrical shifter and throttles and e-brakes! Go mechanical! The best: “This morning it said Check Engine, so I looked and it was there..” Hilarious! Nice to have an “Ian” when you don’t have a “Chris”! Amazing climbing and good humor. LiteBriteNationLaughsThroughMoab!
Looks like a lot of fun. Awsome coverage and editing as usual Brittany. Keep up the good work. Happy Trails to you both.
Sick jeeps in that ride. All the best “influencers”.
Amazing edit Brittany!!That looks so fun. I still can't get over that paint job. Hope you guys are having a amazing day ❤️❤️💯🤙
That other red jeep was oddly similar.
Great video. That was a good mix of rigs. Good mix of great people also. Funny the E-Brake indicator light seemed to be on the whole time also. Again, great video.
That’s because we have all of the nannies shut off (something you should always do in a JL when off roading). 🤙
I go to Moab fairly often. I stay more towards the mild side. Crazy and stupid can be contagious... be safe people. Parts cost a lot of money.
That trail looks like it has a really long tally list it keeps behind a hidden rock of how many rigs it has sent home with broken heart.
3:34 if it wasn’t the RCV rig I’d say that sounded like a snap!!
Hahaha. Ian reverted back to school teacher.
He’s a huge asset to have on the trail!
I could've sworn y'all ran Pritchett on Trail To SEMA, I must have my seasons mixed up. Anyways, not to denigrate anyone's rig nor D ride another but Stammel's paint looks doper imo. All in good fun 😂
34:11 “Hard line only” ?? When did that happen? Pretty sure Kevin didn’t even attempt rock pile! Haha 🤣 😂
As for all the lights and the communication engine codes, check the green CAN bus behind the glove box. Had something very similar happen to me with my 2018 JL. Replacing the CAN BUS fixed it.
We got it all fixed up!
Glad you found a way to use the paddles, I know exactly how that feels 👍
"Three weeks Later" 😅😅😅
God bless lite Brite Nation
HaHa Kevin, you don't have that issue with a stick!
It’s amazing t8 me how you make some things seem so simple while others struggle.
Vehicle setup and driver play a big role
@@LiteBrite well! Y’al” got both in spades! 👍
Never too early to start wheeling.
That little white truck sounds like a bag of pissed off hornets 🐝
What a day of wheeling! Good and bad, that's wheeling!
Daaaaaaamn, some real line killers there, & judging from the thumbnail, that's some line, right there. Lol
Ian Johnson! , that's pretty bad ass to hang out with a tv personality/gear head
Damn that looked like an awesome day of wheeling, great video guys! 😎
He'll of a title. Only the most descriptive ever. Lol. Great vlog!
This is like the off-road version of Avengers… all the 4x4 heroes combine forces to defeat the evil Pritchett canyon!
Sweet trail. Another great video guys
Y A Y M O R E Like this, back too your roots 🎉
Im here for Brittany skrew every one else " cute white gurls are my weaknesses 😂😂😂
I love MOAB. And I’m in MOAB
Great video thank you!
I have never owned an automatic Jeep. I had the pleasure of renting a fully built JK in Sedona AZ for wheeling that was Automatic. It was very different than what I am use too. I wonder if these trails could even be done in manual tranny!? Do you guys ever come across other Jeep enthusiasts doing the level of trails you guys do with manual transmissions?? Just curious. I know the clutch would certainly take a beating. Although sometimes it is nice to have the clutch pedal for bouncing over or navigating certain obstacles.
Trailmater does it with a manual in his wrecker !!
Service 4WD light on for 4 years... bulb finally burned out. Result!
Love seeing this. Take care God bless. 😊
Pritchett is a good one
Excelentes maquilas y video! Saludos desde Patagonia!
Let’s see Brit drive every once in a while.
You may not watch their videos lol she’s got the buggy with tons of videos on it.
Thats what I have been waiting for !
FR!!
Uh, there are a ton of videos of her driving the Stepchild and her buggy. Where have you been?
There’s plenty of videos of me driving my Side Chick and my drift cars. 🥰 And there will be more to come! Now that the Stepchild is finally back up and running again, we’re just pumped to get it back on the trails (and I actually don’t enjoy driving the Stepchild as much as my buggy 😅)
Looks like a ton of fun 😊
Awesome video and trail
Definitely a hell of day 😮😮🎉🎉🎉❤❤❤ skinny pedal for the win ❤❤❤❤❤
Great video
Ya’ll is CRAZY!!🤪
Amazing!❤❤
Happy birthday Brittney 💚💜
Thank youuuu! 🥳🎉
Dang, the Little Jeep that Could!
Brittney has the best WOOOWHOOOOS in the business!
WhooooHoooooo
Living your best lives!
@Lite Brite would you ever consider wheeling in a Nissan Frontier or Titan? You will have far less breakdowns. And would be cool to see you two in a Nissan 😅
Fun video of my favorite Moab trail for the last 25 years. Just did it again this EJS in a much smaller rig than I had in the past. I almost feel like I had an advantage over the bigger rigs in my tiny rig (31" pizza cutters and 89" wheel base on stock leaf springs) Two in our tiny rig group drove chewy hill clean (the other two fussed a bit like most of yours but drove up), and two drove straight up the stair case at Rocker knocker, much to the surprise of the linked 40" tire crowd. There is no perfect size rig for Moab... They all have fun !!
Definitely a blast. All you need to do is bring a good attitude and good friends!
You should do a competition with 31 to 33 inch tires. Open different angels and a manual transmission to show your real skills off and only 5 times of wenching.
Pritchet Canyon just eats up vehicles. It has destroyed so many off-road rigs.
Seeing this makes me want to try it but I’m not close to that area and my jeep won’t handle that unfortunately
Best spotter on CZcams!!
OK Kevin, I've been watching your channel for a minute and created my own "stepchild" along the way. I dropped a 426 right after I watched your YT video. When you installed a 392 steering wheel, I had one installed so I could have paddle shifters too. After your Antigravity video, you get it, I bought one. Anyway, after watching this video it was interesting to me that I have all the same messages on my dash. I guess I'll try to clear all codes and hopefully get rid of service 4 wheel Dr, auto park disabled and hangs in gear. My work around has been my paddle shifters. Any more information on what you did or what might make those 426 gremlins disappear, I would greatly appreciate your help. Thanks Kevin and Brit
That's alot of warning lights😮
Great video! Which wheel offset are you running? 0, -20 or -38? I see the 0 offset on BB site but not Northridge.
We’re running -20. I like some dish to my wheels
We had the same thing happen to us 3 times when in low gear. Did a shift on its own while in manual and then all the alarms on the Jeep went off. Auto park not available, 4wd not available, service, sway bar disconnect not available etc and could only go into 2nd in manual, said 3rd not available. Lots of TCM, BCM, PCM and ECM errors when we ran the codes. Some said unexpected error. Cleared them and then it would be fine for a few months, then do it again. All the modules are fine. When you shift into Low transfer case it sends communication to PCM that you are in low, which sends a signal to the TCM, if it has a slight brain fart your error will occur. We changed out the Can Bus and have not had the issue again (yet?) The Can Bus communicates with all the different modules on the Jeep and there are a ton of them. One little glitch and all the systems lose their minds. Change your Can Bus and ALWAYS clear your codes if you have any when you run your reader. You can also disconnect the main battery for a 1/2 hour and that has also worked for us. This issue was the main reason we bought a code reader that would clear codes. We also checked for all software upgrades for these modules and the upgrades available did not reference any of the codes we received so did not do any software upgrades.
Bro got the transmission delete 🤣😂🤣😂😂
I’d love to see some Baja pros on the buggy.. or swampers!!!
what are the specs on the SC lift/tires/wheels now?
The red Jeep at 20:37, was it painted by the same guy that did the Step Child? Very similar looking style.
Yeah same guy
Check the harness under the shift level.
Ian is the coolest
Quiet Time??? I Read about that in Kindergarten.
Time to get an LJ
I clear my BCM every morning at about 10 or 11 am!
As for my CJ5 (named BULLITT), when I lock or shift something in or out it stays there until I decide otherwise.
I am the control module!! 🙂
Hahaha. I bet you do
دمتون خیلی گرم داداش تشکر فراوان دارم از شما❤❤
Watching the flex, rollover jeepster go up the rock ledge, and then you guys go up. Stepchild pulls a tire, while the jeepster didn't even come close.
Different line. Kevin drove with his back left tire in the hole while jeepster kept it completely out of the hole which makes the difference you see in the video. Go back and watch closely
At that angle, would all the trans fluid drop to the bottom?
Damn, I feel like Pritchetts is getting Harder and harder....
Does anyone think flex rocks and rollover is the lite version of Stepchild or the Diet version of Stepchild?
26:20 friction doesn't care about surface area oddly enough. Great wheeling though and super capable Jeep!!
@liteBrite as long as what ever you guys dou is working 4 u, then GO 4 IT. THAT'S WHAT MATTER'S RIGHT????
I happened to notice every light on the dash on.. I’m assuming it’s the traction control delete switch or programer but I’ve been wondering when all the mods are gonna start causing other grimlins to show up myself…love watching the LJ just walk up stuff longer or shorter wheelbases don’t like at all!
That’s from intentionally turning off the traction and similar Nannie’s completely (should always be done when off roading)
The 392 has a system sort of like my Cherokee Trailhawk.
To be honest with you I think a V8 swapped regular Wrangler is probably a better setup in terms of durability.
I would say get a 392 if someone is going to leave it stock (which sounds completely the opposite to what people would want but I think that's the truth).
Im only 5 minutes in n i dont know the outcome but still.....i hopeu guys got some good side by side shots with Marvin's jeep ...... Seeing asu guys got a similar paint job
From the time i saw his rig at 24 hours to hell and back i really wanted to see them side by side
Hey Kevin do you know what your front and rear Anti squat is set at and your belly PAN clearance
I do not but it’s does so freaking amazingly well. Belly is like 22” I think that’s all I know
Hey Kevin if you ever come up with that information send it my way I'd like to add it to my references thanks Awesome ride
Timeline 14:20...I see Martin has not learned to use a "bed net" to keep loose stuff in the back under control.
That thumbnail though and I'm not talking about the Jeep. WTF?😝
Hello, Friends. The Old Goat wants me to remind you, Kevin, then when the Stepchild suddenly for no apparent reason begins to behave, you should carefully exit the vehicle and slowly back away. Missing you guys, Your Crazy Uncle Karl and The Old Goat.
U were driving with ur brake light illuminated. Could that effect anything like that?
No, so the “brake” light is on (along with a few other nanny lights) because we turn those off while off roading (you always should), otherwise they can kick in at the wrong time on an obstacle and seriously screw you.
My taser works some days and doesn’t some days .
Random thought of the week, but If you spot a RHD vehicule, do you invert driver/passenger? 🤪
Yes, you would! I’ve done it before, and it can get pretty confusing really fast. Lol
Yea Kevin your Jeep mess Chris it's having with draws from a great Mechanic.
Its not just the Stepchild, I don't think any of us know what you're about to do.
Steering sensor, fk around with the alignment.
is that the sum 41 singer??
So did the Stepchild stay fixed ?
It did not but it’s completely fixed now!
Is the RCV Rig on 40 's ? Dana 44 Axle Housing with Of Coarse RCV Axle Shafts ? Asking for a Friend
Not sure what axles but I think so yes
Dynatrac Prorock 44 front housing with JK Rubicon 300m RCVs and 40” Nittos. 5 years of wheelin and counting!
28:52 - Getting too Western. 😳
Sorry, but, nobody but Kevin gets the "full Brittany experience"😂
@20:00 I smelled something...
👍