Thanks Eddie, Glad to be of help. But I did end up buying a Heljan as I could not get the Peco to run smoothly, but I think peco have brought out the own controller/ motor since I made that video. All the best, Glynn
The noise is EXACTLY the same as my old Electrolux tank vacuum cleaner !!! And that REALLY SUCKS !!! (hee hee).. I do hope you're able to quell it..... M, Los Angeles
I was going to do something very similar Glyn but using Pecos new turn table controller, still debating on using the hornby trun table or buying the peco one
Hi Brian, I would like to see how this new Peco controller works, I ended up binning my peco as could not get it to work well with the expo controller. brought a Heljan and that works perfect. thanks. Glynn
Did the big red gorg come with the brass bush with grub screw or did you make some thing to fit,only my sharf just keeps turning even with it's glued wonder if you can help cheers
Hi Derek, the is a little screw which stopped the shaft turning. think you would need to use some araldite glue, is it turning on the shaft or on the turntable? Glynn
Sorry glynn but on your video when you where putting the motor on ,you grown the main sharfed and put a screw in to stop the red gogg from turning hope you can cheers mate
Sorry mate my spelling not to crash hot ,in your video your red cog that goes on the main sharf has a metal bit in the middle ,the one l have has not did you put that in your self .I went to a local place here in Bristol to get a metal part made he wanted £120 to make one so not going down that road hope you can help cheers
Hi mate its me Derek again l have just come out of hospital after heart op .could please email me the address of where you got the metal gog with grub screw as l have lost all record on my compuret cheers mate
Thanks for your video buddy, I am about to fit one of these and this has helped me big time!! Cheers Eddie
Thanks Eddie, Glad to be of help. But I did end up buying a Heljan as I could not get the Peco to run smoothly, but I think peco have brought out the own controller/ motor since I made that video. All the best, Glynn
The noise is EXACTLY the same as my old Electrolux tank vacuum cleaner !!! And that REALLY SUCKS !!! (hee hee)..
I do hope you're able to quell it.....
M, Los Angeles
I was going to do something very similar Glyn but using Pecos new turn table controller, still debating on using the hornby trun table or buying the peco one
Hi Brian, I would like to see how this new Peco controller works, I ended up binning my peco as could not get it to work well with the expo controller. brought a Heljan and that works perfect. thanks. Glynn
Thanks and watching wjth interest
thanks for watching, glynn
Did the big red gorg come with the brass bush with grub screw or did you make some thing to fit,only my sharf just keeps turning even with it's glued wonder if you can help cheers
Hi Derek, the is a little screw which stopped the shaft turning. think you would need to use some araldite glue, is it turning on the shaft or on the turntable? Glynn
@@LNER1946 No screw in box and no where to put the screw into red gog mate
Sorry glynn but on your video when you where putting the motor on ,you grown the main sharfed and put a screw in to stop the red gogg from turning hope you can cheers mate
pretty loud motor!
I could not put up with that noise .
Hi, I agree, I ended up buying a Heljan, no noise, brilliant. All the best. Glynn
Sorry mate my spelling not to crash hot ,in your video your red cog that goes on the main sharf has a metal bit in the middle ,the one l have has not did you put that in your self .I went to a local place here in Bristol to get a metal part made he wanted £120 to make one so not going down that road hope you can help cheers
Hi, have you looked at the expo turntable kit on ebay, under 00 gauge turntables? thats what I used.
@@LNER1946 Yes looked on ebay but could not find the red cog with metal center cheers mate
Hi mate its me Derek again l have just come out of hospital after heart op .could please email me the address of where you got the metal gog with grub screw as l have lost all record on my compuret cheers mate
Most of the time you have the item you are describing too far above the camera sight, useless to follow.
Fair point Des, I.m a crap editor, just upload for fun.