I believe this Stemco wheel hub seal is installed as a single part assembly . Stemco Guardian onto the spindle with a tube style seal installer Stemco Voyager and Discover into the wheel hub with a step style seal installer Please accept this as constructive criticism .
Usually if you have to change the wheel seal I clean and repack the bearings, bearings last quite a long time if they aren’t run dry. If the gear oil in the hub gets black I change the oil, every couple years.
The best video I've been watching all day.
That’s a good tip scoring the old seal to get it off easier. Thanks for your knowledge
Glad to help
From what I have learned over the years oil bath is oil bath you don't use grease for a oil bath bearing
I believe this Stemco wheel hub seal is installed as a single part assembly .
Stemco Guardian onto the spindle with a tube style seal installer
Stemco Voyager and Discover into the wheel hub with a step style seal installer
Please accept this as constructive criticism .
So where did you get that little grease gun?
If you go to a small motors shop, ask for a chainsaw bar tip greaser. That is what it is intended for.
How often does a semi wheel hub require a bearing repack/ oil change?
Usually if you have to change the wheel seal I clean and repack the bearings, bearings last quite a long time if they aren’t run dry. If the gear oil in the hub gets black I change the oil, every couple years.