Sorry for my English. I bought a second-hand Legend24TT and What is my surprise that you also have this software failure that you speak ...? I have a LaserPro 10 years ago and When turning on the machine, or if you have turned on the machine after having made an emergency stop, etc. The first thing you do once is to DOWN THE TABLE 5CM. to avoid hitting the header with any object in the initialization process. Why is this not in the EPILOG ?? I think you just have to edit the firmware and add these instructions (LOWER the table) before moving any of the 2 axes .... Did someone in Epilog correct this error? or there is some key or procedure to do it yourself. Anyway, thanks for your video
Yes I did! You have to take the motor off and get the pulley’s unstuck with pliers. Once the pulleys move smoothly, then you can put everything back together and level your table on your machine again.
Yup, first time using the machine this happened. Thanks for the video!
Jesus, thank you for this. Really got me out of a jam
Pun intended!!
thanks so much! you saved my ass! i thought i distroyed the Laser.. Puh.
Thanks a ton
Sorry for my English.
I bought a second-hand Legend24TT and
What is my surprise that you also have this software failure that you speak ...?
I have a LaserPro 10 years ago and
When turning on the machine, or if you have turned on the machine after having made an emergency stop, etc.
The first thing you do once is to DOWN THE TABLE 5CM.
to avoid hitting the header with any object in the initialization process.
Why is this not in the EPILOG ??
I think you just have to edit the firmware and add these instructions (LOWER the table) before moving any of the 2 axes ....
Did someone in Epilog correct this error? or there is some key or procedure to do it yourself.
Anyway, thanks for your video
Great video. Would you be able to do another video for this but for the Zing 24?
The Zing is a manual focus system so there's not a risk of a jam by an automatic function. Thank you for watching & commenting.
What if it does not corner correctly?
Sydney,
Can you give us more detail? I don't know what you mean by "not corner correctly."
roy@engravingconcepts.com
I opened the front of my laser and the belt is jammed, it does not want to move. Any suggestions?
Anjelica Sauceda did you figure it out? I ran into same thing belt is super stuck
Yes I did! You have to take the motor off and get the pulley’s unstuck with pliers. Once the pulleys move smoothly, then you can put everything back together and level your table on your machine again.
Anjelica Sauceda wow... yikes that doesn’t sound like fun. Looks like some shielding I have to remove to get at them
T H A N K Y O U ! ! ! !