How To Use the ONYX NX1
Vložit
- čas přidán 5. 08. 2024
- We've reviewed it, unboxed it and now we are going to show you how to use it!
Dive in with us as we go through using the NX 1 to the best of it's abilities!
00:00 Introduction
00:59 Turning the console on
01:28 Boot time
02:14 The NX K add on
03:03 Showfiles on Onyx and the NX 1
05:00 Patching on the NX 1
06:20 Controlling the light we patched
08:03 The Encoders on the NX K
09:00 Live Time on the 4th encoder
09:45 The Basics of recording
12:40 Changing what the Fader and Buttons do
15:02 The multi-purpose buttons and function button
22:12 Main back and GO Buttons
23:15 The Back Panel configuration
24:58 The Quick-View button
25:22 Closing
Gamma ECON Par: www.learnstagelightinggear.co...
Onyx NX1: www.learnstagelightinggear.co...
Onyx NX K: www.learnstagelightinggear.co...
Need any Onyx Gear, Support us here: Learn Stage Lighting GEAR: www.learnstagelighting.com/gear
Grab Your FREE Guide to Begin with Lighting: www.learnstagelighting.com/
Learn Stage Lighting Labs: www.learnstagelighting.com/labs
Video Specs:
Video Shot On Canon M50: geni.us/VuLCB
Shotgun Mic: Rode VideoMic NTG: geni.us/v2snsb
Voiceover Mic: Heil PR-40: geni.us/fcN0hAO
Lighting Visualization By Capture: www.learnstagelighting.com/wa...
Video Card: GTX1050 TI: geni.us/WBTe
Backdrop/Ambient lighting:
Eliminator Par Mini RGBW: geni.us/QKXI
Gamma Starburst Pars for backlight: geni.us/R84UceB
Gamma TX5 for Pattern on Backdrop: www.gammaledvision.com
Disclaimer: This video and description contain affiliate links.
Comments Policy: Be nice, and treat others well. This channel has grown a lot, and if I want to keep up with helping folks in-depth, I can't reply to the comments personally.
Thanks for understanding!,
-David
Your dedication to sharing your knowledge is precisely why I chose you as my vendor.
Thanks, Rick!
Hi David, I love the concept of the NX1. If only Obsidian'd add the little LCDs/scribble strips, this would be my ultimate controller.
A question: I am looking for a solution to automate the programming of common presets and playback buttons through programmer automation. In early times we were able to use LUA scripts through M-Tools, later called ShowCockpit, well known to you too I'm sure. Now this 'feature' / leak depending on who you ask was patched. How would you go about achieving this nowadays? E.g. creation of color palate screens is stupid and very automatable work. It takes me 1-2 hours to set this up for new shows and it's a total waste of time.
Most boards have a physical fader for GM. Is there a way to assign one of the faders on the NX-1 to GM?
Not directly, but you can build a Inhibitive fader with all your lights, and it's then your GM
Could you use more than in port that would solve the house lighting issue
Hello , please i have 20 univers artnet in my club using onyx key ultimate and m touch and mplay , i want to buy nx1 console and use it in the network by join show its work fine ? No delay ? Thanks
can you do timecode on it?
Yes! It doesn't have SMPTE ports, so you will need to send your timecode over the network, or get the NX-SYNC accessory, but yes.
Thank you for all the information. Does the NX1 also work with the Onyx ipad remote control app?
Yes
@@LearnOnyx-LearnStageLighting awesome. Thank you