Start your decal business today
Vložit
- čas přidán 5. 07. 2024
- Start your decal business today, all you need is a vinyl cutter, computer, software and a few more materials. Make money selling car stickers and other products. In this video we''ll be making a big vinyl sign. Check out our channel for more ideas.
"#CommissionsEarned" "(paid link)"
Our store: rdidecals.com
Affiliate links:
Graphtec vinyl cutter: amzn.to/3pIrIkS
USCutter Titan 28 inch Vinyl Cutter: amzn.to/3yC1jwn
CAMEO 4 (12 INCH): amzn.to/3uy66jc
CAMEO PRO (24 INCH):amzn.to/3POgbNO
Corner rounder: amzn.to/3JbJQzI
Oracal 651 vinyl 12x24 ft roll: amzn.to/46wUTMQ
Oracal 651 vinyl 24"x10 yard roll: amzn.to/3ulmXRJ
Reflective vinyl: uscutter.com/24-oralite-5300-...
Tape application roller: amzn.to/45apQGa
Oracal color guide ( only for 651 & 631 vinyl ): amzn.to/3W6Q0ow
Magnum magnetics 24"x25' : amzn.to/3P6AHdJ
Blank yard signs: amzn.to/2IBiGWM
RAPID TAC: amzn.to/37ZMl5O
Cutting mat: amzn.to/3uidBWZ
Blue safety ruler (31 inch long) amzn.to/3slsrKy
Squeegee: amzn.to/3bmZK8Q
Small magnets to hold vinyl in position: amzn.to/3kdE6bt
Cutting knife tool: amzn.to/3sbDTYS
Adhesive remover goof off: amzn.to/3eXrNS2
Siser Glitter Vinyl: amzn.to/3u1gnnO
Siser color guide: amzn.to/3ZuQJ60
Teflon sheet: amzn.to/3HvhRKx
Teflon pillow: amzn.to/3Sheqw1
15x15 heat press teflon cover: amzn.to/42gjt4i
Transfer AT75.1: uscutter.com/Rtape-Clear-Choi...
Our store: rdidecals.com
Affiliate links:
Graphtec vinyl cutter: amzn.to/3pIrIkS
USCutter Titan 28 inch Vinyl Cutter: amzn.to/3yC1jwn
CAMEO 4 (12 INCH): amzn.to/3uy66jc
CAMEO PRO (24 INCH):amzn.to/3POgbNO
Corner rounder: amzn.to/3JbJQzI
Oracal 651 vinyl 12x24 ft roll: amzn.to/46wUTMQ
Oracal 651 vinyl 24"x10 yard roll: amzn.to/3ulmXRJ
Reflective vinyl: uscutter.com/24-oralite-5300-economy-grade-reflective-film
Tape application roller: amzn.to/45apQGa
Oracal color guide ( only for 651 & 631 vinyl ): amzn.to/3W6Q0ow
Magnum magnetics 24"x25' : amzn.to/3P6AHdJ
Blank yard signs: amzn.to/2IBiGWM
RAPID TAC: amzn.to/37ZMl5O
Cutting mat: amzn.to/3uidBWZ
Blue safety ruler (31 inch long) amzn.to/3slsrKy
Squeegee: amzn.to/3bmZK8Q
Small magnets to hold vinyl in position: amzn.to/3kdE6bt
Cutting knife tool: amzn.to/3sbDTYS
Adhesive remover goof off: amzn.to/3eXrNS2
Siser Glitter Vinyl: amzn.to/3u1gnnO
Siser color guide: amzn.to/3ZuQJ60
Teflon sheet: amzn.to/3HvhRKx
Teflon pillow: amzn.to/3Sheqw1
15x15 heat press teflon cover: amzn.to/42gjt4i
Transfer AT75.1: uscutter.com/Rtape-Clear-Choice-At75-100-Yard-General-Purpose-Clear-Embossed-High-Tack-Application-Tape
A little bit ghetto. Love it. Thank you for this video.
Another great informational video 👍
I appreciate it bro 👌
that stuff was dope.
Thank you very much! 👏
great video I really like this decals, I hope to start making some soon, greetings from Zacatecas, Mexico
Hello Ulises! We love making decals, gracias por mirarnos y le deseamos mucho éxito! Saludos hasta Zacatecas.
Awesome video thanks! One question though for metal vehicle and trailer large decals do you use regular or adhesive backed vinyl?
Hello! We use adhesive backed vinyl ( Oracal 651 ) for almost everything except for tshirts. Also for large trailers with rivets we use Oracal 751 high performance, this last vinyl is best for curves but is more expensive. Thanks for watching 😀
Hi guys great work 👌🏼👍🏼 just wondering though i am about to make my first large car decal ( not for the car window but to go on the actual car ) which vinyl would you recommend ? Thank you guys lots 🥰
Hello Heidi! We recommend Oracal 651 if it’s a flat surface, if the surface has rivets or any curves we recommend Oracal 751 ( this one is a bit more expensive though ) thanks for watching 🙏
In this video where did you purchase the plastic piece and what is it called? Thanks again I love all of your videos.
Hello Tyrone! Thanks for your support and unfortunately we didn’t get the plastic piece, I will ask the customer next time since we also want to know where to get them 😎
How do you price your decals? I have a formula of cost of goods plus my labor. But I’m not exactly sure how to do the markups
Great video!!
How are you getting your clientele ? Having trouble, lots of business to compete against and people like sticking to who they are comfortable with. Any suggestions? Thanks I’m advance!
Hello Esmeralda! We use local garage groups to advertise our products, I also recommend you start making videos and post them on TikTok you’ll be surprised to see the engagement you can get.
Do you have a website or Instagram page? Can you make a video on how much you typically charge for signs etc. & where you buy your vinyl
Hello Danica! Unfortunately we are still trying to figure out prices, it has been more difficult than I thought lol. We hired someone from fiverr to do market research and he sent a lot of good information but still haven't taken the time to break it down. We just try to get an idea of how long the project will take start to finish plus the materials and we come up with a number to give to the customer. We usually tell them how much the whole project will cost, that way is less confusing instead of splitting materials, labor and taxes. Sorry if this isn't much help. Once we figure something out, we will share for sure
@@RDIdecals It takes time getting everything in order. It's so much stuff is out there. Thing can get be overwhelming. Congratulations on your business.
How would you price this size sign?
what do you use for design software and cutting software? i have a summa S2 T75 i just bought and looking for good software for design and cut.
Hello we use coreldraw x6 for our designs and cm3 for cutting vinyl which comes with the Graphtec CE6000-60 plotter
Where do you get the hard backing for the signs?
Hello! Customer provided the sign, we just added stickers. We have seen similar signs at our local stores like Menards
What's the best transfer tape for mailing decals to clients
We use RTape ClearChoice AT75.1 decals seem to stay in better shape for longer, just adhesive is a little stronger but not bad
Are you happy with your graphtec? What model is it?
Hello! We love our Graphtec CE6000-60
heya, i am plnning on making a vinyl business, just starting. what was that spray you was using?
Hello Jahronimo! The spray we used was Rapid Tac or you can just make a mix at home which consists of 90% water and 10 alcohol and a couple of soap drops. Vinyl businesses are very profitable. Good luck with your project 👌
What's the purpose of the spray if the vinyl already has adhesive on the back ?
Hello, new to this, but I wanted to know if this printer can be used for removable peel stick vinyl floor wraps? For example, Sweet 16 portrait 4'x5' that can be put on floor. Thx
Hello! This isn’t a digital printer, this is a vinyl cutter meaning each color has to be cut and applied separately and most importantly you can’t do actual images or pictures. You can print on a separate machine and then use the Graphtec to do a contour cut - we haven’t done it before :(
@@RDIdecals Ok, Thank you
What kind of transfer tape comes that big
Hello Tiaa! We use the RTape clear choice AT75 comes in a roll of 100 yards and you can get it here: i.refs.cc/5ByIPrp3?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjo3NjAzMjU2NzV9
Ha ha ha I know it’s a little bit ghetto but we get it done!!
😂😂
Hi, I have a question: do you have a recommendation for printable vinyl for car stickers so I can put different colored patterns? thanks
Hello! We’ve never used that type of vinyl since we don’t own a printer-cutter machine. We have installed a couple of those vinyls but we outsourced them, I will ask the person that sells me those types of vinyls and I’ll let you know. Thanks for watching 😎!
@@RDIdecals Thank you for the answer, if you receive an answer please share it with me
Do you think the prism cutter is a great choice for this type of business?
Hello Olga! We have zero experience with that cutter sorry. I did some research and it seems to be a good machine, mainly complaints were related to the stand and not the cutter itself. Thanks for watching!
Any advice on how to find your first client?
Advertise your product on social media like Tittok Instagram Facebook we recommend videos than pictures so people get idea what your product looks like
@@RDIdecals I sincerely appreciate you taking the time to respond, I'll be sure to keep watching! I'm buying sign blanks and magnet blanks to practice
Why did you spray the sticky side with water? To move it if you had to?
Hello! Yes, that’s one of the reasons but mainly to avoid as many bubbles. You should check out wet application with rapid tac, it seems to work better with that solution.
H ow do we Charge/Price this job ?
Esa laptop funciona con photoshop o que laptop recomiendas y que software
Hola! La laptop que tengo es una Asus y el programa es CorelDRAW X6, también tengo Photoshop aunque creo que no es para hacer imágenes vector cómo CorelDRAW. Mis hermanos y yo tenemos Asus y la verdad son buenas, es necesario informarse que el CorelDRAW o cualquier programa que adquiera sea compatible con la computadora, hay unas que ya no tienen para dvd o cd y es necesario descargar el programa en línea.
What’s the details on that vinyl cutter you use!?
Hello! Our vinyl cutter is the Graphtec CE6000-60 and is a 24 inch cutter.
Shout out to my boi matt!
Hi will this vinyl also work on vending machines?
Hello Sheri! As long as the surface is flat and made of plastic, metal, glass even walls it should be fine. Thanks for watching
How much you charge for this
Hi sir I have existing Decal Business here in Philippines
Hello Ernan! That’s great, we wish you success. Thanks for watching 😃
Do you have paid course in spanish?
Hola! Nosotros hemos dado cursos pero por el momento solo hacemos calcomanias y estampados con vinil textil, todo lo que tiene que ver con corte de vinil. Le dejare el enlace a nuestro canal en español y correo electronico para que nos de más información sobre que es lo que le gustaria aprender, que tipo de programa y maquina tiene. Nuestro email: info@stickeraficionados.com y canal en español: www.youtube.com/@StickerAficionado
Do you offer mentorship?
Hello! That is our goal, we want to offer courses online. You can send us an email and give us more information about what you would like to learn so we can get a better idea. guitarrist03@yahoo.com
great video, but man gotta work on that vinyl applicating method. side to side man!!
Do you need a business license for sticker vinyls ? Applying to cars and selling signs?
What brand of vinyl are you using?
We use Oracal 651 is for outdoor use. Thanks for watching!
We are starting our own vinyl designs just getting started thanks for commenting back your welcome I’ll keep watching keep up the good work the sign looks amazing
You can't go wrong with that brand, good luck and let us know if we can share any knowledge.
@RDI where do you buy yours I found one website it’s $20 for 10 yards but I use the 12” though
hello cual es el program que usa
Hola! Nosotros usamos CorelDRAW x6
@@RDIdecals gracias
Cuando cobraron como puede uno dar precios
Hola Brenda! Le voy a dejar un enlace a nuestro canal en español donde tenemos un video donde más o menos le damos una idea de cómo cobramos, no es perfecto pero espero le sirva. czcams.com/video/i4exuJj-gXg/video.html
@@RDIdecals gracias x su tiempo
Hey man a little late here but why did you do it wet and not just dry I normally only do it wet when it’s on glass
Hello! Several reasons, the main was to show the difference dry vs wet application, second the weather was too hot and didn’t want to take the chances our stickers coming out bad. Thanks for watching 🙏
Dude!!! So much material gone!! 😢
Hey Elton! I know that feeling lol, I wished they had more sizes available per color but oh well. Thanks for watching 🙏
How can i contact you ?