3D Printed Eye Mech Tutorial

Polymaker's Creative Technician Luke Taylor, talks through the design and animatronics featured in the Eye Mechanism.
Download the .STL files here: www.thingiverse.com/thing:1152248
Watch the Assembly Video here: • 3D Printed Eye Mech As...
Watch the Promotional Video here: • 3D Printed Eye Mech Tu...
Read the Original Article here: www.polymaker.com/3d-printed-a...

[@PagliaroMark]

Thanks might be using this.

[@luispierepadillacaceres3596]

EXCELENTE FELICITACIONES

[@RGJubilee]

I like your eye mech .

[@kentharris7427]

Brilliant design. I will use paper clips as pushrods so there will be no flexing. Also I will be using an Arduino Nano to control it. Will be making an automated pumpkin.

[@proneczarniecki2833]

What are these animatronic eyes for

[@Illijah02]

at 4:24 use metal pieces on the red part outside of the eye like the part thats rightofthe right eye and lef of the left eye, u get me? good. try that

[@oHmega14]

If I may ask, what range of motion do the servos have. I'm sure they're probably like any other normal servo and get about 180 total degrees of motion, but how far do they move when connected to the eyes? Are they moving the full 90 degrees in each direction? Thanks

[@2openhere]

Brilliant, thx.

[@williammontenegrochamorro4191]

Quiero comprar estos mecanismos cómo. Gracias

[@docentejulio]

Onde está os desenhos para imprimir 3d

[@iamsuperroot]

Is it possible to get 1/2 scale STL to build a smaller version? Thank youi.

[@williammontenegrochamorro4191]

Soy de colombia y deseo comprar éstos mecanismo. Como pago. Lo puedo hacer por tarjeta crédito a cuotas. Gracias.

[@williammontenegrochamorro4191]

No tengo respuesta de mis anteriores comentarios por que?... vuelvo a lo mismo quiero comprar èstos mecanismos de animatronic Eye..en dónde los encuentro o un contácto para comprarlos.. gracias.

[@umbertoedanielevita]

How much does it cost?

[@SkyGameZZZZ]

Umberto e Daniele Vita 5 cents

[@shorovsaha3954]

I successfull your vedio triying

[@del9936]

Your pivot point for the eyes are too far back producing the eyes to move off centre and they are not rotating as they should do

[@yapskkardesler4497]

Aaaaaa