Brake System Cleaning (Pads, Rotors and Calipers) | How to Clean Your Brake System (Do-It-Yourself)
Vložit
- čas přidán 11. 05. 2020
- Brake system cleaning tutorial. This video DIY guide will show you how you can properly and safely clean your brake rotors, calipers and brake pads. It also shows you how to replace brake pads as well.
Most people don't know how to maintain their braking system which is a crucial part of our vehicle. This video can help you out by starting to clean your brakes thoroughly.
Products Used in this Video can be Found Here:
www.noahsgarage.com/mechanics...
Just search:
Brake Cleaner
1/2 Drive Socket Wrench Set
Sand Paper
Oil Drip Pan
Silicone Paste
Piston Brake Compressor
3 Ton Jack Stand
Floor Jack 3.5 Tons
Isopropyl Alcohol
Related Videos
How to Safely Lift Your Car:
• Paano Itaas ang Iyong ...
How to Make a Brake Bleeding Bottle:
• Paano Gumawa ng Brake ...
How to Flush Your Brake Fluid:
• Paano Mag-Flush at Mag...
How to Change Tires:
• Paano Magpalit ng Gulo...
Share this video:
• Paano Linisin ang mga ...
Disclaimer:
Noah's Garage has no liability for any property damage or physical injury that resulted from incorrect use of any equipment or tools from any information contained in this video. You can use any information in this video at your own risk and discretion. Also, the information contained in this video doesn't guarantee a particular result.
As a DIY automotive channel, Noah's Garage highly encourages "safety" as its highest priority. Besides from the safe practices contained in this video, the users are responsible for following their own safety measures to avoid any unwanted accidents.
This video is supported by a monetization program called Google Adsense through CZcams Partner Program. I also use affiliate links from various companies such as Shopee, Lazada, Amazon and many others to make money out of this channel.
Fair Use Notice:
Opinions and all information in this video are owned by Noah's Garage. Some images, music and products are owned by their respective owners/companies and are most likely a copyrighted materials.
Such materials are made available for entertainment, information, educational, teaching and research purposes only as stated by the US Copyright Law which refers to "fair use" policy (Title 17 U.S.C section 106A-117).
www.copyright.gov/title17/92chap1.html
czcams.com/users/aboutcopyright/fair-...
www.law.cornell.edu/uscode/text/17 - Auta a dopravní prostředky
![How to Do a Complete Brake Flush and Bleed [Do-It-Yourself] | Brake System Flush Tutorial](http://i.ytimg.com/vi/KTyp_wknXpA/mqdefault.jpg)
![How to Do a Complete Brake Flush and Bleed [Do-It-Yourself] | Brake System Flush Tutorial](/img/tr.png)
Products Used in this Video can be Found Here:
www.noahsgarage.com/mechanics-tools/
Just search:
Brake Cleaner
1/2 Drive Socket Wrench Set
Sand Paper
Oil Drip Pan
Silicone Paste
Piston Brake Compressor
3 Ton Jack Stand
Floor Jack 3.5 Tons
Isopropyl Alcohol
For other concerns, drop a message at my Facebook page located at the "About Us" section of my channel.
Same lng po ba yung porma ng caliper ng mga old model ng Montero boss? 2010 model boss?
New subscriber here. I love all the precautions and safety check tsaka ready ka sa pag video kita lahat may tamang ilaw and focus. More.videos to come
Salamat po sir 😊
Very good informative topics impressive to all New driver
Laking tulong ang mga videos sir. Maraming salamat.
Welcome po sir
Dont forget to subscribe 🙂
Salamat sa tuturial mo sir..noah...daming kng natutunan..at ginawa ko sa sasakyan ..marMing salamat
Welcome sir. Wag kalimutang mag like at mag susbcribe sir
Very nice sir..salamat sa tips..
Keep up boss Noah. I love your channel. Always excited on your every post. Kudos!
Maraming salamat sir Mad. Keep watching and I'll keep posting informative videos :)
Nice video sir salamat
Mahusay ka kabayan. Keep on sharing your knowledge. Salamat po.
Salamat sir
Dont forget to subscribe 🙂
WOW....weekend project Brake Cleaning....thankz
Nice sir.
Para saan po ang silicon phaste
Sir sa wakas i did it front rear nalinisan ko lahat nawala na yong ingay na sobrang lakas kapag nagpepreno ako ....i just did follow your instruction nakatipid...hehehe....thanks a lot sir...GOD BLESS YOU ALWAYS....
Welcome sir. Congrats po 😊
Salamat sir sa tulong mo na paglilinis
Welcome sir
Dont forget to subscribe 🙂
hi sir new fans mo ako, ok big help sa amin kz mahal ang magpagawa sa casa kung pedi naman gawin at hindi complicated Do it you own "DIY" nlang. thank you sa video.
Welcome sir Hernan
Dont forget to subscribe
Thank you sir sa info keep safe bro
Welcome sir Jose 👍
Thanks for your vlog
Welcome sir
Salamat din sir
Welcome sir
Dont forget to subscribe 🙂
Boss noah thank u s mga video mo , i already subscribed . Sana boss may working light ka pag against the light ang cam position mo , medyo madilim di makita ung parts na pinipihit o inaalis mo.thank u boss noah marami kami natutunan diy.more power sa channel mo,god bless
Salamat sir.
Oo nga po sir, lighting din ng problem ko. Yaan mo sir pag me budget na bibili po ako. Salamat po sa pagsubscribe sir
Oo nga boss noah, bili ka na ng mahanda lighting mo para masa makita ng ng klaro mga pinaggagawa mo jan. Hehe
Salamat sa video. Nashock ako sa dami ng bilhin ko. Akala ko WD-40 LOL.
New subscriber idol👌
Salamat sir
Thanks bro Noah...
Welcome sir
Idol keep it up.. onti na lang..
Salamat sir
Ang ganda na ng front brake system ko kasi pinalitan ko ng brand new yung rotors. Painted lahat. Pati calipers.
Nakatulong itong video.
Yung rear brake system ko ang mukhang delubyo itsura. Hindi well-connected bolts sa caliper. Parang nilift ko lang by hand natanggal na. Isang bolt lang pala naghohold sa rear caliper. Grabeh yun.
Ayos po. Congrats sa succesful diy job
@@NoahsGarage Hindi pa tapos yung rear. Mechanic na gagawa iba. Baka mabilog yung caliper bolt eh. Malaking improvement nung front kasi replaced lahat pati brake pads.
New subscriber po
Maraming salamat sir 😊
How about doing the bearing wheel grease repack it would be a good maint. learning nxt time.
Good job Noah Sir.
Salamat sir Felix
Don't forget to subscribe sir
salamat sir, no need to go sa mechanic para magchange brake pads
Hehe dali lang di ba sir
Dont forget to subscribe
Sir pwede gasolina gamitin jan mag linis ng brake sa harapan??
Friend do you have video on brake shoe replacement sa rear ng Montero Sport
Wala po kasi puro disc brakes po akin. Pero meron akong video na drum cleaning ng fortuner sir
Dont forget to subscribe 🙂
Salamat sir
Welcome sir
Dont forget to subscribe 🙂
@@NoahsGarage subscribed na sir
Yeah what he said !
Hi Noah. Do you have any idea how to fix if may rattle/play ung caliper? Thanks.
Check mo po sir ang caliper bolts and cariage bolts sir
Dont forget to subscribe 🙂
Sir any idea where can i buy ABS sensor in banawe quezon city.. salamat po
Which wheel ang kailangan mo sir? Pwede kita bigyan ng link. Message me in FB.
Dont forget to subscribe
New subscriber here.. Thanks po info
Salamat sir
@@NoahsGarage sir question po nagpa replace kasi ako ng brake pads napansin ko lang po pag uwi ko ung isa pad po pinatong ng mechanic ung luma na shim sa new shim n ksma ng new pads.. Di po ba delikado un?
@@xRipJaws balik mo sa kaniya kamo gamitin ung bago.
@@NoahsGarage thanks sir
Thanks..additional knowledge again..out of topic ilang tons po ang capacity ng crocodile jack niyo?thanks
3.5 tons low profile floor jack
Dont forget to subscribe 🙂
Thanks for sharing your knowledge to us.
Hindi po ba maapektuhan yung tire alignment kapag tinatangal po gulong at magbbrake cleaning?
Di naman po sir.
Dont forget to subscribe 🙂
@@NoahsGarage thank you Sir. subscribed. I also want to be a reliable mechanic in my garage as mentioned in your CZcams channel. Rooting for all your tutorials. God bless you more 🙏🏻
Sir Noah, tks sa video very useful. Ask ko lng, b4 cleaning sa brake pads o replacement, dapat bang naka hand brake. Tks Jose
Sa rear naman handbrake sir, so yes para safe at di umandar ang kotse habang naka angat po ang harap
@@NoahsGarage tks po sir noah gid bless
Good AM Sir saan ba mas safety ilagay jack pagmaglinis ng brake.Monty 2019 at Ano ba ung gen1 gen2 at gen3
Hello Sir Faustino. Please watch this:
czcams.com/video/Wzm0kznh_FE/video.html
Then regarding po sa generations ng Monty, kindly send me a msg on my FB page para maisend ko po sa inyo ang pictures.
Sir Noah..off topic lang po, im one of your subscribers. Ask ko lang po kung gaano kadalas i repack ang mga wheel bearings ng Montero. Kung may video po kayo pano gawin, it will be well appreciated. Thanks and more power!!
Hello sir Marlon.
If you still have stock wheel bearings sir, it may last 100 to 130,000 km depending on your driving conditions. Usually po, nagpapalit ang iba kapag magpapalit na ng rotor kasi naapektuhan ng bad bearings ang brakes. If you already exceed this number sir, you may repack or replace your bearings (pair).
Dont forget to subscribe sir
@@NoahsGarage Thanks for the tip, sir Noah. I am one of your subscribers na po. More Power!!
Boss safe po b n maglagay ng mga brembo caliper cover s brake for aesthetic lng?? Thanks po
I suggest keep it stock sir
Dont forget to subscribe 🙂
Informative po.. pero me comment lang po ako.. siguro masyado lang po kayong malinis at gumamit po kayo ng alcohol bukod sa brake cleaner na spray.. at hinugasan nyo po ng water yung pads, pero nakalimutan nyo ishare kung paano nyo tinuyo..
At silicon paste, silicon grease po ba ito...
Medyo madilim sir. Kulang s lighting. Pero ok s tip silicon paste para s pins and brake grease s hardware.
Oo sir, sensya na at hapon na kasi yan. Di ko na mapriority ang lighting kung dugyut ang mga kamay mo at mag-isa ka lang hehe. Salamat sir.
Dont forget to subscribe po
Nice channel bro! Sakto I plan to DIY mine this week. ask ko lang ilang grit ng liha ang ginamit mo?
1200 po ata yan limot ko na e. Basta high grit kc wala naman rust calipers ko
@@NoahsGarage Salamat sir! Please post more!
Hi Sir, new subscriber here. Very informative and laking tulong sa mga DIY'ers tulad ko mga videos mo Sir. anung # ng Liha ginamit mo po Sir? Thank you and keep it up Sir
If i remember correctly po, 1200 kc wala naman po kalawang caliper. You may use lower grit sir if you like po
@@NoahsGarage Thank you Sir.
sir wala kang video ng replacement ng brake caliper kit?
Wala pa po sir
Dont forget to subscribe 🙂
Sarap mg diy kulang lang ako sa tools. Sor noah need ba itorque wrench mga bolts n yan?
Yes sir. Pagnasibrahan mo baka masira ang thread, pag kulang naman baka makalas dahil sa vibration habang tumatakbo sir.
@@NoahsGarage sir same lng kya higpit ng montero ska fortuner sa bolt?
Good day sir noah.
Tanong ko lang po regarding sa brake cleaning and brake pad replacement , the same procedure lng po ba ito sa multicab?
Generally the same procedure for all front disc brakes sir
@@NoahsGarage salamat po sir.
Can you please share where you bought your jack?
invol.co/cl75vhb
Dont forget to subscribe 🙂
good day. tanong ko lng. ilang km. mag palit ng brake pad and shoe for strada and montero? anong magandang brand ang puede i replace? thanks.
Probably 40 to 60k mileage. Mitsubishi oem sir or Brembo, Akebono sir
What grit of sand paper, what brake cleaner spray?
1200 grit and any brake cleaner will do sir
Dont forget to subscribe 🙂
To open the brake pad, will need to release the hand brake or keep it locked ??
Release the handbrake
Boss nung pinihit mo ung manibela pra mka-access k s brake caliper ay nkaandar Ang makina ng sasakyan or pd na diretso pihit,kz ung smin s Ertiga ay EPS,tenk u Boss.
Pwede naka ON lang or engine on sir. Basta naka angat ang car, mapipihit po yan
Dont forget to subscribe 🙂
Good pm po ano po brand n gamit nyong turque wrench?
Generic brand po ata ito or flyman.
@@NoahsGarage thank you idol
hi sir noah! yung dun po sa hinde tatapakan ang "preno" bago gawin ang brake job pano po ba procedure?hindi ko po sya as in tatapakan for example nsa bahay po sa garahe lng.salamat po!
Kungagbabaklas ka sir ng caliper for cleaning, wag mo tatapakan ang preno kasi lalabas ang piston, di mo po mababalik yan kung wala kang piston compressor.
Dont forget to subscribe 🙂
Idol gud am yung rubber po s caliper ko sira n . Meron po b s auto supply na rubber lang toyota hi ace po idol car ko?
Noah na lang po sir, hwag idol hehehe.
Yes sir meron pong rubber boot para sa caliper pin sa mga auto shops.
Dont forget to subscribe and share my channel sir to your friends.
Noah's Garage
Salamat idol
Boss ilang brake pad ba meron ang Montero gen 2? Kasi may nakikita ako pang front, rear..
Kung all wheels po ay disc brake, 8 pad po. Kung drum ang likuran, 4 na brake pads lang po (front).
Dont forget to subscribe sir
Sir.noah, ilang Nm.ung 2bolt na ginamitan mo ng torque wrench. At pwede bang pihitin ang steering wheel na hindi umaandar ang makina.
90 ft lbs sir, bale sa NM ay 122 NM
Kahit naka on lang sir pero dapat naka lift ang harapang gulong sir
Dont forget to subscribe
Thank you po sir.noah,
Boss noah dun sa caliper holder 90ft pound na torque. Pero dun sa dalwang bolt boss ung nilgyan mo ng silicon paste wala ng torque yun? Tantsahan na lang bang mahigpit yun?
Yes sir. As far as i remember 90ft lbs un mismong bolt ng caliper. Gamitan mo ng torque wrench sir para sure
@@NoahsGarage thanks boss noah
Sir Noah's ask ko Lang paano po ba malamang Kung palitin na yong brake pad, thanks Godbless🙏♥️
Hello sir Marlon. Me metal indicator po ang pads sir, masisilip niyo po yan sa gulong ninyo. Kapag nag touch na ang metal sa rotor, time na po ichange ang pads sir
Dont forget to subscribe 🙂
Sir, ask ko lang sa rubber boot bat silicon paste ginamit niyo? ari po ba grasa?
Silicon paste po talaga sir ang ginagamit sa rubber boot. Grasa po ay ideal for suspensions po.
Dont forget to subscribe sir
@@NoahsGarage sir San po ba nakakabili ng silicon paste?
Sir Noah, if wala kang crocodile jack, pwd ba magpalit ng brake pads one by one gamit lng ng jack.. Tks jose
Yes sir gamitin mo lang ung bottle jack po sir
Tks po Sir Noah
Sir ask lang hindi ba pweding sprayan ng brake cleaner ang face ng rotor mismo...?...thanks...
Pwede po sir
guide pins or sliding pins po ung nilagyan nyo ng silicone paste not the rubber boot.
Dont forget to subscribe 🙂
Sir when pressing the brake down hill may vibration thanks
Check your pad and rotor sir.
sir Noah's ung normal natunog pag nag Break ako (Montero M2013) almost one (1) plang ako nag palit ng Pads original ung kinabit ko???
Kung bago sir ang pads, at metal noise ang naririnig mo when braking, ang problema rotors mo or ung shoes ng drum brake kung drum ang rear mo sir.
boss yun sa rear disc brakes may video ka ba? kasi iba pala yun sa front disc brakes compare sa paglinis sa rear discbrakes kasi nakakabit yun hand brake sa caliper..may idea po ba kayo sa paglinis ng rear discbrakes?
Halos the same lang din sir. Disc and drum brake combination kasi yan sir.
Makakatulong ito para magka idea ka sir sa rear disc brake - czcams.com/video/d_SdbU8D91k/video.html
Dont forget to subscribe
sir noah, pag tumatakbo tong monty ko maingay ung preno sa my right sa harap,
Check mo pad sir baka upod na
Dont forget to subscribe 🙂
Bossing Anu ba gamit mong break pad??? High Q ung nagamit ko parang matigas
Stock akin sir
Dont forget to subscribe
Boss ano pong sand paper ginamit nyu?kahit ano lng poh buh?
High grit sir. Na mention ko ata sa video sir
Dont forget to subscribe 🙂
Pwede rin ba sir normal na ratchet lang pang higpit kung walang torque wrench....thanks uli...
Pwede naman po sir
Salamat sir learning a lot from you.. minor job DIY n lang
good job saan nakabibili ng califer grease
Here sir
www.noahsgarage.com/mechanics-tools/
Just search Brake Grease
Dont forget to subscribe
Hi Sir,
No need to bleed po to fit the brake pads?
No need sir, pero kung gusto mo i-bleed pwede rin po kasi off na ang wheel para isang trabaho na lang po
Dont forget to subscribe
Hello sir same lang po ba sila ng montero 2009-2010 model?
Yes po sir
Sir vlog ka nmn ng inhibitor switch cleaning
Hmmm pwede hehe
We really like ur vlogs i have a montero 2013 thanks for all the effort and sharing ur knowledge to us,,
And also the suction control valve ,, its a big help for us ,, to do also he he he ,, god will reaqrd ur wisdom,
Ano po pwede gawin pra d lumabas piston idol?
Wag mo tapakan sir ung brake pedal kung tatanggalin mo sa disc.
Sir Noah ano po kyang problema ng brake ko kc meron syang Squeaky sound sa front pag mg brake ako, pro bago naman yung disc pad ko. Slamat idol
Baka brake hardware sir, lagyan mo ng brake grease. Or check mo pagkalagay mo ng brake pad, baka di pantay. Check mo rin rotor mo baka palitin na rin sir.
Noah's Garage Ok sir try ko po.. Slamat sir, antayin ko ung vlog nyo sa brake drum kung paano linisin and mag adjust.
hi Sir Glenn. Brake drums are self-adjusting po, though you can of course clean the parts. Thanks po
Sir ang aux fan ba natin , may polarity ? Or pwde pagbaliktarin ang wiring?pinutol ko kc ang wire nung aux fan sa harap
czcams.com/video/GCDz9Old3GU/video.html
Tnx sa replies sir. Ngbaklas ako ng montero kc..
Sana may video kau paano mgbklas ng full dashboard
Sir noah anu yang silicone paste n ginamit mo
Para don po sir sa rubber boot ng caliper sir. You can use grease as an alternative sir
Awkey po sir salamat love your channe po
Sir noah ano pong silicon ang nilalagay jn sa bolt
Silicon paste sir
Dont forget to subscribe 🙂
Pwde ba contact cleaner gamitin instead of brake cleaner? Meron kc ak contact cleaner...
Mas maganda brake cleaner kc quick dry siya sir
Dont forget to subscribe 🙂
boss matanung ko lang buti yung sayo sagad ang kain ng rotor disc mo yung skin parang may kaunting natira sa dulo
Linisin mo sir. Baka me mga brake dust na naka harang
sir!pede bang panglinis ang gas sa rotor disc?and yung breakpad pg napalitan ba dpt iblead dn ang break fluid or apak apakan nalang yung break ay oki na?thank you!
Wag gas sir, brake cleaner po ang para sa rotor. Ung pad, pwede nang hindi i-bleed. Binibleed lang ng mga mekaniko yan kasi para makita mo name additional na ginawa sila hehehe. Unless, madumi ang iyong fluid then that's the time na mag bleed ka.
Dont forget to subscribe
@@NoahsGarage thanks for replying Sir!
Boss anong brake shoe gamit mo?salamat po..
all stock po iyan sir
Sir Noah OK lang ba gasolina gamitin pag mag linis ng preno sa harapan?? Salamat
Brake cleaner po sir.
Dont forget to subscribe
Boss, where did you buy your gloves. Maganda sya. Yung gamit ko kase ngayon yung panlaba. :) Maluwang.
I cant find the store where I bought the gloves sir.
Hanapan kita ha
Dont forget to subscribe 🙂
Ito po sir
invol.co/cl1tf17
boss san mkkbli ng silicon paste?
www.noahsgarage.com/mechanics-tools/
Just search silicon paste
,wat if kung wala nlagay na grease?
Mag iingay yan sir
Akala ko pati ung piston ng caliper lilinisin mo rin. Inaabangan ko pa nman. Kc nagi- stock up din daw kc un.
Kung gusto niyo linisin ung piston, you can either press the pedal para malinisin kahit papaano ung loob, or disassemble the whole caliper po
Sir Noah pag magpalit ba ng brake pads kailangan pa ba mag bleed ng brake fluid?
Hello Sir Marlon
Hindi na po sir
@@NoahsGarage salamat sir Noah more power be safe and Godbless
Sir ilang griy gamit nyong sand paper?
1200 grit. Makinis lang ginamit ko kasi hindi naman makalawang.
Kung makalawang ang caliper mo, gamit ka mas mababang grit na sand paper.
Salamat sir. Please dont forget to subscribe and share my channel to your friends and social networks.
Pag sobrang kalawang naba sir kaya pa remedyohan?pad lang kasi napalitan ko eh.gusto ko sana maalis mga kalawang.ano kaya maganda gamitin
Lihain mo lang sir. Kung me power tools ka, mas madali po ang trabaho. Then pintahan mo sir ng red or black.
Dont forget to subscribe
Boss surgical gloves ba gamit mo (14:10) dito? Pasend naman link pls. Thank you and stay safe po.
Ito po sir
www.noahsgarage.com/mechanics-tools/
Just search "latex mechanic's gloves"
Thanks
@@NoahsGarage Boss 5'6" ako ano kaya size (small, medium, large gloves) maganda fit sakin para maorder na? Salamat ulit.
@@lanfigueroa5683 puro XL ang nasa Lazada sir. Hanapan kita ng medium ha. Balikan kita or mag message ka sa FB page ko sir
Sir noah anong tama mong grit sa brake pad?
Nalimutan ko na sir. Depende sa needs mo yan sir. Kung makalawang, use lower grit sir. Kung pang finish lang naman, higher grit paper ok na.
@@NoahsGarage usually sir pag panglinis lng ng brake pad ano kya kadalasan gamit? Halimbawa sa dumi lang po
Sir pano pag automatic? Kailangang mag brake pra mag start pra maipihit ang gulong.
Kapag i lift mo sir, mapipihit mo manibela without turning the ignition on
Boss anong magandang brand ng break pads?
Akebono or Brembo sir
Ask uli sir hindi ba dapat lihain ang face ng rotor..?...thanks uli sir..
Ninipis sir kapag lihain po. Pag ginamit na lo iyan, ang pads po ang lilihi jan sir
Sir, ok lang ba naka handbrake yung sasakyan pag nagme-maintainance ng mga break?
Kung sa harap na gulong, pwede naman i hand brake. Kung sa likurang gulong, Ikalso mo na lang ung harapan sir. Besides naka lift naman ung car mo sir.
yung 'rubber' boot, caliper bolts yan diba? rubber boot yung rubber kung san pina pasok yung caliper bolts
boss matigas po yung break pedal ko. parang na lock yung disk rotor kaya hirap humatak.. ano po dapat kong gawin.. salamat po
Paoverhaul mo ung piston sir
Dont forget to subscribe 🙂
Boss bakit nagpa brake cleaning ako tapos palit rear brakepad binuksan pa din hood ng sasakyan ko ano kaya ginawa pag ganun?
Nilagyan malamang ng brake fluid ung reserve tank mo sir. Para makita mo na maraming ginawa hehe
Dont forget to subscribe 🙂
boss noah ano po kaya ang problem.. nagpalit na po kami ng piston, mga rubber bushing, pero naninikit pa rin ang preno, pero kapag i nopen ko ang bleeder okey na uli.
Nagrasahan ba ng mabuti sir?
Dont forget to subscribe 🙂
Como pintar el caliper
czcams.com/video/2BjZ6tExoEI/video.html
Dont forget to subscribe 🙂
Hola soy español y tengo un montero 3.2 V 60.y me gustan tus videos. Mi coche es del 2005. Me gustaría que hablaras de ese modelo... Gracias
Hola francisco
Intentaré proporcionar contenido para su coche, señor. ¿Tiene el mismo motor 4D56?
No olvides suscribirte
@@NoahsGarage Hola gracias por contestar. Pues no se del motor.. 3.2 v60. Chacis corto 3 puertas.. 2005.. Grcias
Por ejemplo no entiendo porque tiene dos cilindros exclos del embrage
Y si se refiere a si han cambiado el motor.. Creo que no es el de fábrica... Y alguien anulo la válvula egr...
I speak inglés.. Y can read the video. But not too well. I'm from tenerife. Thanks for everything...