Engineered Hardwood Floors: Pros & Cons & Comparing them to Solid Hardwoods
Vložit
- čas přidán 19. 05. 2022
- There seems to be quite a bit of confusion about the topic of Engineered Hardwood Floors. Today we take a deep dive into the Pros and Cons of Engineered Hardwoods and how they stack up to their Solid Hardwood Counterparts.
-
#woodflooring #remodel #kc #kansascity
◦ For More information visit our website: www.kimminaufloors.com - Jak na to + styl
![Eminem - Houdini [Official Music Video]](http://i.ytimg.com/vi/22tVWwmTie8/mqdefault.jpg)
Great comprehensive video on engineered flooring, thank you!
very helpful...first time we've owned a house with engineered hardwood floors...nice to know how they're designed, etc...
Very informative and helpful!
Excellent information. I wish you were located in my town.
Best video I’ve seen on this subject!
Thank you so much for watching and commenting. Glad you like it.
People always also confuse engineered and click together flooring. They then see the engineered click together floor and then confuse that with laminate. The big box stores refer to engineered as solid sometimes.
great point and I may need to shoot a video that covers all of the various flooring types and installation types. I can certainly see why consumers are confused.
Knowing next to nothing aout wooden floors, my most immediate apprehension is what happens to spills on them. Does some of the liquid sink through to the concrete below whereupon it creates mold, etc.
If a substantial amount of water is spilled on the floor it will seep through the cracks and settle underneath. From our experience it will take some time to dry out unless the planks are removed (no airflow).
Biggest issue with moisture is the swelling/cupping that will result in the planks. We seal our concrete substrates with a moisture barrier that will essentially trap the moisture between concrete and bottom side of the planks. Without a food source, doubt you would see mold and we haven't experienced that over past 15 years.
Average prices per square feet would've been nice to add for all those types of engineered wood
But those VOC's in vinyl though...🤔
This is solid point and there will be some initial off gassing of VOC's after the floor is installed. Some product lines are worse than others and as a consumer you should verify/research this before selecting a product. Thanks for watching and commenting!
@@kimminauwoodfloors thanks. great video.
I actually have been researching but at the end of the day, it's seems harder than it should be to find out the "Green shield" rating... a warehouse will of course tell me whatever I want to hear.
Why must pre finished floors have the bevel?
subfloors are never perfectly flat and the milling on the factory finished floors isn't perfect either. If you slid two factory finished planks together, one plank may sit slightly higher than the one next to it and leave a sharp edge. Basically the bevel provides a smooth transition between each plank and allows for imperfect subfloor conditions. The bevel isn't required when sanding the floor since any high spots would be sanded flat.
@@kimminauwoodfloors 👍
The music is a huge distraction while he is talking.
heard this complaint before and will see if we can tone that down. Thanks for watching and commenting!
The luxury vinyl floors are toxic and they are garbage, retaining moisture in the subfloor, if cost is a concerned, you are much better off to go with a low cost lower grade solid wood floor you get all the same benefits
Your comment is misleading. To blatantly state all LVT is toxic and garbage is patently false. LVT didn't become the number one commercial floor covering without having tangible benefits. We love hardwood as much as anyone and it accounts for about 98% of what we do but our singles biggest pet peeve in the industry is cheap engineered planks that can not be refinished. Low cost solid is great above grade but that is not viable option below grade. Our preference will always be solid or high quality engineered but for those with a limited budget, it is our opinion that a non-toxic LVT is a better performing option over cheap mass produced crap that can never be refinished. Thanks for watching!