2nd Gen Ram LED Projector and DRL Headlight Project

I was tired of the cheap crap headlights on Fleabay and Scamazon. So, I built my own set. I used off brand 3" LED projectors and Panamera type shrouds and mounted them inside a new set of knock off Ram standard "Crystal" headlights. I baked them open, ground out the high areas and put the projectors into the housings through the hole in the back. The shrouds snapped on. I lot of fiddling with wiring and some added boxes made it all work. Wiring diagram is in this video, pause if you want to screen shot it. Don't yell at me if you cannot figure it out. I am not in the headlight business.

[@ProjectDura]

By far the most helpful second Gen headlight video on CZcams. Thank you!

[@roelangel2008]

Can u help me out with the diode for the shutter situation?? Im about to install but the low beam and hi beam situation is stopping me. Thanks!!

[@BigniceJohn]

@@roelangel2008 check to wiring diagram in the video. It covers the diode.

[@BigniceJohn]

@@roelangel2008 check to wiring diagram in the video. It covers the diode.

[@roelangel2008]

@@BigniceJohn yes i screenshotted that. What diode did you use? Is there a specific size or type? It just goes from 12+ to the hi beam ground?

[@roelangel2008]

I think i had it all wrong. The diode goes on the hi beam wire before the shutter negative. Am I correct now? 😂 hard to explain