I've got one of your 5 packs for my first speed run Limitless build and it's awesome. Thanks for the toe tip for gone bananas tires, I have some on order.
Great video bro honesty goes a long way. My next purchase is going to be the Limitless or the Infraction. Also I’m working on doing a speed run with my XO-1, any suggestions? By the way I sub to your channel.
Thank you, i understand aerodynamics so the back wing being flat was a given but it never occurred to me to remove the back of the body. I left the front ones on because my rear is all aluminum and I haven't finished the aluminum splitter to counter the rear wieght. I used velcro on the sides for holding the body and its worked very well. I am having a hard time going over 90 not because the power isn't there its just scary. I put a lot of work into my car and I've already experienced a crash and the car does hold up well but i got lucky, if there was a curb or a tree in the way it would be over. Setup 1 800kv SSS 29T spool 45T pinion Setup 2 1450kv XK-4082 29T spool 34T pinion I really appreciate the information and hopefully i can convince myself to go past 70% throttle on setup 1, set 2 is stupid and I haven't used it again since the crash.
About the body bowing out at speed. I made a custom piece that backs up the bottom edge of the body of my Slash that I velcro the body to. It does the same thing as taping, but is cleaner. You have a 3D printer, so you could whip something up that does the same job so you don't have to use tape anymore. Just a thought.
Great !! Wish all pros like you share info instead of telling lies ...i just got mine, i wanna run the same 140 mph...which spur/ pinion should i use.?..i am running the TP 4070 75.000 rev with the mamba XLX...and a 6S graphene 100 C batery.. I dont want to take the risk of burning the esc or the motor....i left the 34 pinion and a put in a 34 spur....is that a good combo for 140 mph ?i also have the 29 T spur...which ones should i use ?also which wheels should i use ? Grps will hold this speed or better go for the brs foams ? Thks bro...
@@joshbrown8953 thanks bro !!! Any extra weight in the front to avoid flipping ? And please can you tell me which body are you using , and any extra back spoiler or wings ? Thanks for sharing ,. Few people as kind !!!!
Eduardo Nessim Your welcome man! I use the limitless body thats trimmed at the back so it fits perfectly👍also i use the stock wing from the limitless body but you can buy much better quality wings online that will improve handling, weight, speed and overall performance. and i would only use small weights at the front to start with and work from there!
@@flopackrc5452 Thank you so much for your feedback! $130 aint bad for the Graphine 6S 6000mAh 75C. Before getting your feedback I almost bought the Spektrum Smart 6S 5000mAh 100C they want $160. Spektrum claims it has 'Maximum Continuous Discharge of 100C' which now I question.
FLOPACK RC on my xlx the no voltage cutoff I understand that you leave it on that when doing a speedrun but if I making a couple runs up and down what the best recommendation I leave it on ?
Is there a way to get ahold of you by chance because my friend juan got a few cap packs from you and I wanting to see if I can get a hold of you my self but I dont have social media and I am interested in your rx cap pack
You seem like a knowledgeable person to ask.. typhon v4 6s stretched or limitless for speed running and some parking lot bashing. 100mph goal on speed runs and half throttle passes on parking lots. What would you suggest Many thanks
Cutting the back out was wrong advice. Whoever told you that was wrong. the part you cut is needed to put just enough pressure at the rear to keep the rear planted. Look at other videos out with the Limitless is doing 140+ mph. the back end is still in tact. I'm sure you heard of Phillip Jolly, right?
I just checked your channel I haven't seen any runs over 125 I've done 164 with a slash on 8s and 163 with 1/8 scale GT car and 149 with the Limitless on 6s not 8s and 160mph on 6s in slash ..I think I got this
DOWN HILL PHIL IS SLOW ... HE ALWAYS FETCHES HIS CAR LIKE A DOG ::: HOW COME EVERY PB THE CAR DONT COME BACK TO HIM ? YOU HEARD OF JOVA BORIA RACING WORLDS FASTEST ?? THATS WHO I WOULD TAKE ADVISE FROM
I've got one of your 5 packs for my first speed run Limitless build and it's awesome. Thanks for the toe tip for gone bananas tires, I have some on order.
Great tips, good looking out Fam!
I love the no bs from you. Subscribed!
I subscribed for the same reason, hes about that no BS, nothing but Respect for that....Subscribed!!
@@offthewallhobbyman6978 thanks man
That body looks good and thanks for the tips!
Thanks for the tips. Should I trim the wing down all they way the on the infraction? And should I open up the tailgate ?
Subscribed, no bs, love it.
👍👊 Great tip!
Cool vid bud much respect
Thanks for sharing bro 👊😉👌
Hey man thank you so much for this info! I gotta ask, do you turn your steering dual rate down a bunch for speed runs?
Yes 50%
Nice video I was into speedruns back in the day also I would tuffen the inside of the body I have tips for days :)
Iknow this is a old video but i appreciate the honesty for that i subscribe bro good job
That’s a quality tip 👍🏽
Well done, for telling the people 👍🏻
GOOD TIPS BOSS
Very nice info
Yep noticed the body rubbing so I taped mine down with gorilla tape just so I can use one piece to open and close it for awhile good tips
Hey man how do I get the receiver flo pack I heard you say eBay but I been looking just see the cap pack
Thanku very much big bro
Man your packs are great
Your spools are worth every dollar...Great info
Thanks brother appreciate it
try to order it pack today no luck for me out stock ?
What Pinion and Spur are you running sir?
Awesome my first limitless run was with a xlx
4070 2200kv 34spur 29pinon 121mph 60% throttle smc 8s batteries
Thanks Jason for the Limitless owners, I am one.
Great video bro honesty goes a long way. My next purchase is going to be the Limitless or the Infraction. Also I’m working on doing a speed run with my XO-1, any suggestions? By the way I sub to your channel.
Xo1 is a beast that's one car that I felt defeated by 118 mph was my fastest... tp 4070 2250kv great 6s motor
Thank you, i understand aerodynamics so the back wing being flat was a given but it never occurred to me to remove the back of the body. I left the front ones on because my rear is all aluminum and I haven't finished the aluminum splitter to counter the rear wieght. I used velcro on the sides for holding the body and its worked very well. I am having a hard time going over 90 not because the power isn't there its just scary. I put a lot of work into my car and I've already experienced a crash and the car does hold up well but i got lucky, if there was a curb or a tree in the way it would be over.
Setup 1
800kv SSS 29T spool 45T pinion
Setup 2
1450kv XK-4082 29T spool 34T pinion
I really appreciate the information and hopefully i can convince myself to go past 70% throttle on setup 1, set 2 is stupid and I haven't used it again since the crash.
Would like to order 8s cap pack and a Receiver pack how much for both? And how do I PayPal you
Hey Jason, What do you think about the ripple killer cap packs.
There basic radial caps ripple is always around 15% while FLOPACKS is around 5%
About the body bowing out at speed. I made a custom piece that backs up the bottom edge of the body of my Slash that I velcro the body to. It does the same thing as taping, but is cleaner. You have a 3D printer, so you could whip something up that does the same job so you don't have to use tape anymore. Just a thought.
Great advise as always
Great !! Wish all pros like you share info instead of telling lies ...i just got mine, i wanna run the same 140 mph...which spur/ pinion should i use.?..i am running the TP 4070 75.000 rev with the mamba XLX...and a 6S graphene 100 C batery..
I dont want to take the risk of burning the esc or the motor....i left the 34 pinion and a put in a 34 spur....is that a good combo for 140 mph ?i also have the 29 T
spur...which ones should i use ?also which wheels should i use ? Grps will hold this speed or better go for the brs foams ?
Thks bro...
You need a 34 pinion 38 spur👍
@@joshbrown8953 thanks bro !!! Any extra weight in the front to avoid flipping ? And please can you tell me which body are you using , and any extra back spoiler or wings ? Thanks for sharing ,. Few people as kind !!!!
Eduardo Nessim Your welcome man! I use the limitless body thats trimmed at the back so it fits perfectly👍also i use the stock wing from the limitless body but you can buy much better quality wings online that will improve handling, weight, speed and overall performance. and i would only use small weights at the front to start with and work from there!
For LiPo batteries, do you recommend using 75C or 100C rated? I have also heard that some people are only using 5 cell LiPo's.
Any c rating over 90 C is fake there has never been a lipo tested over 90 C go with graphene you can't go wrong
@@flopackrc5452 Thank you so much for your feedback! $130 aint bad for the Graphine 6S 6000mAh 75C. Before getting your feedback I almost bought the Spektrum Smart 6S 5000mAh 100C they want $160. Spektrum claims it has 'Maximum Continuous Discharge of 100C' which now I question.
Roaring top is another great light bulb I would say it's very comparable to the graphene
What power system are you running that on 6s you 140 mph
Great info I subbed I got a question brother on one of your videos if you don’t mind ?
Yeah what's up man
FLOPACK RC on my xlx the no voltage cutoff I understand that you leave it on that when doing a speedrun but if I making a couple runs up and down what the best recommendation I leave it on ?
Leave off make sure your cooling off before runs
Wow, Nice, Where can I get a Flow Pack from.
hope u dont mind wt gears are you
running ?
Mod1 gears
How do I order cap pack
Hey bro how can I get some of your stuff
Are you gona make a limitless full build for sale an how much ?
Yes sir after I'm done I'll hit you up bro
@@flopackrc5452 appreciate it are u running t.p motor ?lmk I would like to purchase one already built thanks
Tip 1. Do not film vertically.
😂👍
Part # for that team derango gear
Time to knock the cobwebs off my limitless 4sure. My new born babygirl keepn me busy alot lately. Will get back into the game before 2 long...
U make em big dog the flow packs
Yes sir ..
I need 2 brother for my infraction and my limitless
Is there a way to get ahold of you by chance because my friend juan got a few cap packs from you and I wanting to see if I can get a hold of you my self but I dont have social media and I am interested in your rx cap pack
Flopackrc@gmail.com
@@flopackrc5452 I have emailed you about getting a price on receiver cap pack and never received an email back
I checked emails I didnt see one from you . Flopackrc@gmail.com I have the rx packs in stock 25$ mag me well get you going
Can you send me an email at kparvin2012@gmail.com
You seem like a knowledgeable person to ask.. typhon v4 6s stretched or limitless for speed running and some parking lot bashing. 100mph goal on speed runs and half throttle passes on parking lots.
What would you suggest
Many thanks
Limitless
Yo Jason good work bro im a fan in Georgetown Guyana i would like to build a Limitless appreciate if you would help me to put it together thank you
Thanks bro appreciate it
@Arthur yo GT family.. this is the first time I've seen a guyanese man into this.. wouldn't be suprised if you knew my fam.🇬🇧🇬🇾
Lol the mysterious bag of plastic goodies nobody uses! Crap...... come on arrma can we get tad more R&D here
Lol right
Jason I want flopacks,please send me your info
Flopackrc@gmail.com msg me boss
Basically make it a typhon.... did I get that right🤔🤣
camera usage secrets that no one tells you.
Cutting the back out was wrong advice. Whoever told you that was wrong. the part you cut is needed to put just enough pressure at the rear to keep the rear planted. Look at other videos out with the Limitless is doing 140+ mph. the back end is still in tact. I'm sure you heard of Phillip Jolly, right?
I have heard of downhill Phil I've done 149 with the back cut out what have you done ?
I just checked your channel I haven't seen any runs over 125 I've done 164 with a slash on 8s and 163 with 1/8 scale GT car and 149 with the Limitless on 6s not 8s and 160mph on 6s in slash ..I think I got this
DOWN HILL PHIL IS SLOW ...
HE ALWAYS FETCHES HIS CAR LIKE A DOG ::: HOW COME EVERY PB THE CAR DONT COME BACK TO HIM ?
YOU HEARD OF JOVA BORIA RACING WORLDS FASTEST ?? THATS WHO I WOULD TAKE ADVISE FROM
😴😴😴😴😴😴😴😴😴😴😴
This didn’t age well 😂😂😂
It's running hard theres a method to my madness you'll see soon boss