What's In My FPV Drone Bag 2023
Vložit
- čas přidán 21. 07. 2023
- ❤️ Support me here: / brodiereed
I can't even count the times I've been asked what FPV gear I run on a daily 😅
So today I finally answer the looming question.
What's In My FPV Drone Bag?
WHAT'S INSIDE MY FPV DRONE BAG 👇
PD 45L backpack: amzn.to/3DmI7oj
PD camera cube: amzn.to/3Y29Js9
Nazgul evoque F5: tinyurl.com/mrxnw5nv
Dalprop nepal N2 props: amzn.to/3O1gaY8
Stubby antenna (For DJI air unit): amzn.to/43zSqjp
BetaFPV meteor75 pro: bit.ly/42gFCxW
CNHL 6S 1500mah battery: amzn.to/3K4ochp
Xiaomi 10000mah battery pack: amzn.to/44PoL6I
TX16S controller: amzn.to/3YpdkPu
Rip sticks: amzn.to/3JooAaw
Crossfire module: amzn.to/3MjPIJn
ELRS module: amzn.to/3K8CVZ4
Luma neck strap: tinyurl.com/45yfmz7d
DJI Goggles 2 (Digital/O3): amzn.to/3q74ZoB
Ethix battery strap: amzn.to/3rDIWGy
DJI Goggles V2 (Digital, but used for analog): amzn.to/3Je2esy
BDI Digidapter V2: amzn.to/46vEYQq
TBS Fusion Goggle Module: tinyurl.com/2fh52w3m
GoPro Hero 10: amzn.to/3rzOHFf
Freewell ND filters: amzn.to/3O1y8JN
Smoke stopper: amzn.to/3PvluFk
TS101 soldering iron: amzn.to/3kJ9gw1
4 in 1 hex driver: amzn.to/3nIrIWq
Ratcheting prop tool: amzn.to/3yk2DmI
Solder: amzn.to/3ZHgNdp
Flux: amzn.to/3rvJyxS
🚁 FPV ONLINE SHOPPING
Best Shop For NZ & AUS: www.kiwiquads.co.nz
📨 CONTACT
For business inquiries email me here: hello@brodiereed.com - Zábava
ur not wrong about the flux, but a better way to explain it is the flux rips away the layer of oxidation on the metal and allows the solder to tin it easier
Very cool! I honestly did not have a proper scientific understanding as such of what the flux was actually doing. Thanks for sharing ✌️
Production Quality is incredible my dude! Thanks for this video. You will for sure get more subs soon. stay on the grind dude!
Thanks mate! Appreciate the support ✌️
That soldering iron is the mini ware ts101 it’s an absolute beast, and so convenient to use with usb-c. That intro was sick💪, looking forward to the next podcast episode
That’s the one! Podcasts are put on hold for a little bit just as I really try to nail quality in some of the upcoming videos. Not being abandoned, just on hold ✌️
Glad you dig the straps mate 💙💙👌
Hell yea! Next stage is try out a Luma Quad 😉
love the intro !
Thanksssss
Awesome videos Newbee drone makes a foam for the goggles2 and it is really nice and soft and about 3/4" thick. no light leak
Cool, thanks
Great video ...Dude 😎. Happy flying...
Thanks! Happy flying to you too ✌️
Epic music makes a walk through the park even better.
If you get a good flux-core solder it's really not necessary to use additional flux
Good video as always, love your investment in these videos well done keep it up😉😎
Thanks mate!!
Tip for stick ends rather than paying 30usd....
Grab a $5 brass insert pack... 33D print off thingiverse a set of thumb grips the same.. insert with soldering iron..... walah 30c stick ends :)
TBH this kinda applies to everything FPV. I printed face formers for my Cobra goggles so now fit perfect. Camera mounts, bag straps to convert a normal backpack to externally mount a quad.
Quad wall mounts/desk stands. So on and so forth
Great advice my man! I love the idea of getting into the printing side of the hobby ✌️
Hey, I see that you use CNHL Black batteries which I also use. After a while those sag really bad even if the internal resistance isn't even high. If you get new LiPos I can highly recommend the CNHL Ministar, they are lighter and don't sag as bad when they get older
Kia Ora! Interesting video. After 2 years of FPV, I still don't have a proper toolkit (just random tools scattered in the house). I guess I'll start one based on what you have. It would be interesting to know what you have in your bag when you travel. Doing FPV + bringing normal camera gear is difficult equation when you need to be lite. I watched another video where you said the Avata is your best travel FPV drone, and I think I agree with you because of the convenientness of the system. You said you only took this bag in Bali for two weeks. Hell yeah I don't know how you fit or organized all your stuff and clothes inside haha!
I went VERY minimal to Bali! One decent crash and it wouldn’t all been over with the Avata honestly. Only had spare props haha
Travelling with FPV gear is a hard one, and I haven’t found anything more compact than the Pavo Pico, however that’s not a great solution for longer range flights either
I broke the same switch at rightside since day 1, now I shorten all these switches by cutting it away using Dremel rotary tool. Saw you removed the handle maybe it is a good idea too, I try to flip these handle to make it compact but the handle is blocking external module's antenna. TX16s is awesome, finished you video and found that we have very similar setup except the G2 goggles. I bring additional multimeters and skew, no flux, xiaomi wowstick, dji V2 bag for analog antenna.
Ahhh must be a switch problem not an ‘us problem’ 😉😂
you forgot the OTG cable with betalight on your phone haha then you can change the rates on the go for testing haha amazing video man keep it up =)
DOPE INTRO
Thanks you!
You said the oven ?! Tf that’s genius bro 😎 omg am bout to revive a small fleet
Hahaha as long as you haven’t left them too long! Keep a good eye on it though
I also got the tx16s. Im new to rc and drones; spent atleast 100hrs on simulator with ps5 controller before i ever got a radio or drone.. so when the radio got here it didnt feel right to me until i fitted playststion analog sticks to the gimbals 😂😅
You can see a preview of it on the community tab of my channel if your interested in just how goofy that looks 🤣🫣
Haha sounds like you just need to adapt to it, or if the PlayStation stick ends are working for you for now then that's awesome too!
@@BrodieReed lol yea you are right. I tend to be a lil stubborn about things like that so I insisted on changing my equipment over just adapting with time. Too impatient I guess 😅 that's alright tho cuz I been flying like this for about a year and it works great. I highly encourage new comers to the RC world that have tons of gaming experience to give it a shot; as well as mode 3 infact!
People like me who fly planes and helicopters on video games may find it easier since your left gimbal will have the same bindings you would see in most games, like a GTA helicopter.
I put like 6hours in on mode 2 and could not even make a turn without falling out of the sky but as soon as I went to mode 3 it just clicked like I'd been doing this for years
Fuck me, That intro was so good, I was looking for the skip add button XD.
Great cinematography.
Hahahaha what a comment, love it 😂
Hey mate, just one question for ya--what hair gel do you use?
I'm just messing with ya.
You won me over. I've watched a bunch of your videos over the last couple months and today is the day--
I'm subb'n ya bro! Keep up the awesome work!
haha well currently I've shaved my hair off 😂
Appreciate the support mate!
hahahah Everyone strugles with ELRS I started with ELRS in AIO FC just recently soldered an ELRS receiver in my first big drone but honestly never had issues with ELRS not until now... the coolest thing also is with you want fly my drone I can set my receiver into lending mode and anyone can bind their ELRS RC. and I continue using the telemetry is amazing.... and is much cheaper than Crossfire, also easier to find availability in the market, but crossfire is also great!
Yeah I have a lot to explore with ELRS !
Just wondering how the stubby antenna performs instead of a long one?
To be real with you I haven’t noticed a difference whatsoever (Which is ideal haha), adds more rigidity to the build which I love and doesn’t appear to compromise performance
@@BrodieReed I’ve never seen anyone do it before. I’m considering doing it to my quads, any suggestions?
@34degrees sure! I just wouldn’t do it to anything that you specifically use for long distance
dude u only had a bad problem with elrs bc it was a spi drone that was it
It's kinda funny at this point though 😂
woder why the batteries were half price
Flux contains acid and removes oxidation from a pad. This allows solder to better flow onto the pad and stick to it. Ideally, any residual flux should be removed using alcohol to prevent corrosion.
Keep making videos and shredding!
👆This is a much better explanation than mine haha
im ausie
no Face wipes or proactiv haha burn
What for?