Ultimate 5” Freestyle/Cinematic Drone Build - 2024 Premium Quad
Vložit
- čas přidán 23. 12. 2023
- #fpvdrone #fpvfreestyle #fpvcinematic #buildvideo
All the parts You need:
• Frame - ImpulseRc Apex Evo
www.hobbyrc.co.uk/impulserc-a...
• VTX - Dji O3 Air unit
www.hobbyrc.co.uk/dji-o3-air-...
• FPV stack - SKYSTARS H743 60A
www.hobbyrc.co.uk/skystars-h7...
• Motors - AOS Supernova
www.hobbyrc.co.uk/aos-superno...
•Reciver - TBS Crossfire
www.hobbyrc.co.uk/tbs-crossfi...
•GPS GepRc M10
www.hobbyrc.co.uk/geprc-m10-n...
Buzzer - Vifly mini
www.hobbyrc.co.uk/vifly-lost-...
3D prints files : GoPro mount, buzzer mount, GPS VTX antenna and immortal T I’ve get from thingverse.con
Depends where You living just get the same parts from the local store or order on AliExpress
Good Luck with Yours builds!!
Looks like a nice build just a little thing I would definitely suggest to help you with soldering your xt60 pads & your motors on the esc is getting a shovel tip or as others say a screwdriver tip for your soldering ion to create more base heat to flatten your welds more & make it more durable 😁👍
Ottima build❤
Nice job!
Thank You! ✈️
Nice job
Thank You!
Good Job 👍
I must do a build video myself but with cheaper parts
dang...this "4kHDR" option on YT has me seeing color like its the first time lol...that some crispy color FPV build happening RN
No komen k dron baru kan kira mantap lah ok up2 lgi terbaru ok i malaysia k
❤️😁🇵🇱❤️
hello
Could you please share the Betaflight settings as well?
I'm a beginner, so I want to watch the Betaflight setting video if possible
Nice build my friend 🫡 subbed
Thank You! ✈️
hey man it's amazing build ;) i will make it one day by the way I'm your new subscriber 💙
Thank You!✈️ Really appreciate for Sub!
I need a cheap old drone to sell to you
😅
Nice build!! Did you put any motor cable guards on the arms? Looks kinda square on the edges 🤔 or is it just electrical tape?
Thank You! Yeah that cable guards come with the frame kit from ImpulseRC and I just tape them up… They very strong
Beautiful build! Subbed. Looking at building my first 5” too - quick question but what does adding the crossfire receiver do? If I’m running dji controller then would I still need to add that receiver? Cheers and amazing job!
Thank You! ✈️ If You want to fly on dji controller then don’t need the crossfire.
But compare CRSF to Dji… on crossfire is way more range
Haha I just went from using the dji controller for first few months in the hobby to swapping to elrs boxer and I wish I could go back in time and not waste 200$ on dji controller.
@@BeautyBeastRCwhy exactly.. im using dji rc2 and see no need to upgrade except i bought 3.5 cm long sticks to give me more precision.. I honestly want to know what im missing?
@@ConceptNull it's funny, The wifey and I where literally you a few months ago 🤣. I saw so many comments saying the same thing and I asked the same question as you are now 🤣. There is nothing wrong with the dji controller persay. The elrs rx and radios just feel better. I did the extended sticks too and it doesn't compare. I believe I became a better pilot after I went to the boxer radio and it fit much better in my man hands. The wifey got a radiomaster pocket and she loves it compared to dji radio as well. If you never try a different radio you'll never know what you are missing and you will be happy with dji.
For Conformal coating do you add it on after to the sotter and FC?
Yeah after soldering when done the first flight test…. Then if is work you can conformal… full FC unless usb ports and bootloader button
Also do not forget the barometer, do not cover it!
hey i was wondering if i buy a iflight Evoque with 03 air unit to use it with my dji controller 2 can i get it with the tbs receiver just for when i get a tbs module at a later date? like will it still be able to bind to my controller 2 when i get it with tbs as easy as i would with the controller 2? thank you :)
Sure You can! Only You need to check the SBUS wire… need to be connected. The brown wire from o3 air unit to flight controller and then You can fly by controller 2 with crossfire on board no problem mate! ✈️
@@FPV_Worldwide thanks alot mate youve saved me from not buying it with tbs and having to install it at a later date when i get a controller so now i can just use my dji controller 2 for now with the tbs still onboard cool! and would it already be pre set up in bataflight the same way it would be if i got it without a receiver for controller 2? thank you so much for your help man:)
Me to I’m going to do the same thing, but I want to know about binding or flight if there are some problems, thank man (I see your question about beta flight, I want a return to)
Nice job! How did you change the O3 wiring?
Thank You! I not change the o3 wiring… there is just plug and play 😀
@@FPV_Worldwide I'm having trouble finding one of those plug and play cables to my iFlight Blitz F7 E55 flight controller. Any suggestions?
@@vanderveerfotografie9247I look on manual for Your FC because I never build on iflight electronics. There I find is no plug and play for Your FC… You need to manage to solder the wires
@@FPV_Worldwide thanks!! That was also my conclusion. Have to solder a connector or directly soldering to the FC might be the best
What flight times do you get with the Supernovas compared to previous builds?
On slow cruising as on flight test I get almost 7mins on battery 1300mah 6s… is longer flight for about 1min or so to compare with others quads 🤙
@@FPV_Worldwide thanks, that’s quiet interesting, I expected them to eat up the amps and use up the battery quicker.
@@testpilotian3188 they really do, They are only sized differently , most fpv motors suck between 40 and 50 amps, the aos sucks 60amps, it says on the data sheet, they are only more powerful, the hype about better flight times are false. ask me how i know XD
Heyy, do you know what is the final weight? (Without battery or action cam)
The drone was sold but as I remember that was around 400g 😊
Man everthing is top quailty except for the skystar stack cheap junk get a proper stack for that drone
Hi, what does this weigh without battery please?
The quad is with new owner all ready 😊 but I believe it was around 400g. New projects in progress. I have something special and it will be better one I think 🔥
I don’t get it why TBS crossfire. …. . Use ELRS!!
All my quads are on crossfire but yeah the next one will be on ELRS
@@FPV_Worldwide what is the difference between crossfire and ELRS? great video btw, you earned a sub! Keep the videos coming brother!✌
@@Humble452 thank You! With this two radio controls no much difference. They both are very good. Crossfire in my opinion is the best for Long Range and mountains cruising. ELRS last year get very popular because they are on open source and budget friendly and also very good too. Next build I’ll make the budget friendly and will be on ELRS. Thanks once more! ✈️
@@FPV_Worldwide thanks looking forward to seeing your ELRS video, I just ordered a Boxer Max (ElrS)
Use what you have, or can get!
no telem? how fast is it? How many amps are rosser-the-fraud's motors pulling??
What You mean no telem ? Is really fast ✈️ the motors have very high top end… 150km/h easy 🤟I don’t check yet the amps when pulled to high throttle… but I believe is over 60… but I’m impressed how they performance on low throttle and produce very small amount of amps 🔥 they are epic
@@FPV_Worldwide- he was really hoping that you would join in and be a hater with him, lol
RCinpower motor has a lot thrust that’s why pull many amp.
@@andyhoughtaling6319 Who's hating? Obviously, the OP doesn't have any experience. No problem - we all start somewhere. Nobody knows wtf you're talking about.
@@mlentsch just you, right?