Chevy 350 Cold Start Rough Idle Cam COMP Cams 292 H Magnum Flowmaster 40 series
Vložit
- čas přidán 14. 08. 2023
- COMP Cams Magnum 292h Cold Start Small Block 350 Chevy with Flow Master 40 series Ruff Idle Sound Raw
In this video, I cold start my 1985 Monte Carlo SS after it sat for about 10 days. I'm down in Florida and a ton of moister accumulates in the exhaust after a few rain and solar showers back to back. The engine is a 350 I built about 20 years ago with all of the parts linked below. The cam that gives it that ridiculous sound is the COMP Cams 292H with .501" of lift and a lobe separation of 110 the sound is anything but tame! Enjoy!
Carb - amzn.to/3QLJNzk
Carb Spacer - amzn.to/446XlZy
Intake - amzn.to/45sYE68
Thermostat - amzn.to/3OVct7H
Block and rotating assembly - paceperformance.com/i-2384062...
Water Pump - amzn.to/3qsMJGB
Oil Pump - amzn.to/47yxWLe
Oil Pan - www.summitracing.com/parts/mi...
Timing Set - amzn.to/3YxV48k
Cam - www.summitracing.com/parts/cc...
Pushrods - amzn.to/3Oyzs7l
Heads - amzn.to/47vHhTQ
Rockers - amzn.to/3DTuz3M
Headers - www.jegs.com/i/Hooker-Headers...
Mufflers - amzn.to/449m3Z5
Spark Plugs - amzn.to/3OXbtjN
Plug Wires - amzn.to/3sfSCHs
Ignition - amzn.to/3KDmuUw
Fuel Pump - amzn.to/47K2GsT
Fuel Pressure Regulator - www.summitracing.com/parts/pf...
Fuel Pressure Gauge (inline) - amzn.to/3YAY4Rl
T fitting for Gauge - amzn.to/3YPjCdr
i can listen to this all day im 17 and love small blocks ls will never sound this good i cant wait to buy a obs and make it sound like this
This is therapeutic for me
Literally music to my ears
Sounds awesome. Sounds like a little man is inside the engine beating drums.
Them Ls swaps don’t sound like that…. 💪🏾 that baby singing…
How did this world agree on losing this sound?!!! Kia sale Saturday, screw that!!!!
Sounds wicked to me! I love Montes anyway!!
Had that cam along with Dart Iron Eagle heads and very happy 355 cube inch
I can listen all day and be perfectly fine
It’s sounds good and I have the same cam in my 84 ss.
What cam is that
How much hp ?
Sounds awesome what motor mount did you use motor sits still 🔥 especially with a Big cam
Sounds a lil rough
Do they make a Hydraulic Roller version of this cam ? Sound crazy yessirrr
How much would it be to build a motor just like that
Love the car! What trans and stall are you running in it?
Great sound. Still have some vacuum??
You can get a computer controlled cam n fi carb...
Put a Holley based carb on get a lot more out of it .