Let's not forget, the tungsten sharpener was 1200 grit sandpaper, you had to sign for a postal stamp sized piece. Only the bosses sons got wet and dry, the rest of us get that timber stuff
That's nothing. I had to go up hill both ways, across a swelling river, in 8 feet of snow, through a crowd of leftist dems, pitch black and against hurricane force winds both ways. All to find out I forgot my tungsten. Upon making the trip a second time to learn the breaker was turned off for the grinder.
Just like driving stick, if you don't ever grind em, you ain't driving. With everything in life. If you don't make mistakes here and there doing something, you're not doing anything and infact are the mistake yourself.
Lmfao, we kept the angle grinders locked up in a cupboard, that way we knew if one of our welders fcked something up 😂 not only do they have to do the walk of shame with a grinder in hand , but the whole area jeered them when the grind sparks started too😂
80% of the time prepping the joint, 1% sharpening and 19% of the time welding. In an Ideal world that is, when the Tungsten is dipped, the percentages easily add up to 300 % 😂
You could get a lot of sharpened tungsten so you can do a quick change, or are you just looking for an excuse to walk around? Just Joking. I know it seemed like I was always sharpening tungsten, but now, after 3 yrs of practicing, I might have to sharpen tungsten every now and then. Practice, practice, and practice some more. I bought Aaron’s training and after 3 days and maybe 300 or 400 beads later, I was laying down like I had been welding aluminum or years. Seriously made all the difference for me. And no, Aaron didn’t pay me to write this.
I keep 6, double sided. But i also try and go as long as possible without needing to sharpen them. If i go less than a full week between sharpens, i know ive been screwin up hard.
I allways make sure to have enough spare tips right next to my welding. To make sure I can finish the weld. Otherwise I would have walked a couple miles extra I guess😜
I love watching your videos I just wish they were longer that way you could watch your technique cuz you're a bad man when it comes to a TIG. What that wire do or rod
All videos, no talking, no tuition (maybe a few text inserts) just watching you work I and others can learn. Impeccable timing mate 👍🏻 😎 seen you draw in last video not too bad, but got this theory that shit hot welders are usually good at other things. Would love to see you on snooker/pool table 👍🏻 any good? Thanks for all the Weld por my friend 😎
I tried welding with a camera between my legs once and it was truely awful, so I'd blame that for the little accident, it's just an awkward location for a camera, especially for someone with the kind of balls to show off their welds on the internet.
All welding/fabrication questions are answered on the website www.6061.com (not here in the comments section, sorry. Too many to keep up on)
The best alu welder I've seen, proper precise and clean and sick beads, helped me loads man cheers pal Anglesey, wales UK 🏴 👨🏼🏭
By far this is one of the best welding channels of all time😁
Back in the day we had to walk a mile through 3 feet of snow to sharpen our tungsten.
I wish I had it that easy ............................. had to walk a mile through 36.8 inches of snow AND it was uphill BOTH ways.
Let's not forget, the tungsten sharpener was 1200 grit sandpaper, you had to sign for a postal stamp sized piece. Only the bosses sons got wet and dry, the rest of us get that timber stuff
That's nothing. I had to go up hill both ways, across a swelling river, in 8 feet of snow, through a crowd of leftist dems, pitch black and against hurricane force winds both ways. All to find out I forgot my tungsten. Upon making the trip a second time to learn the breaker was turned off for the grinder.
MORE BROKE DICK COMEDIANS......
uphill, both ways...
I’m not a bad welder, I just like taking walks to my bench grinder 😜
Even the best welders duff the tungsten time to time. Anyone who says they don't is a bold-faced liar.
Just like driving stick, if you don't ever grind em, you ain't driving. With everything in life. If you don't make mistakes here and there doing something, you're not doing anything and infact are the mistake yourself.
Ive never gotten the tungsten stuck.
But it’s because I’m not a welder.
I've been welding for 32 years. If you say you don't hit the puddle now and then. Liar. True story.
👍
Absolutely love your setup nice and clean. 🇦🇺
Good to see even the best tig welders sometimes also weld their tungsten to the work like I do - or do they?
😳👍
I was watching the work bounce in the first weld and said to myself, "hope he doesn't dip"...
Happens to the best of us.
As a confessed tip dipper I always sharpen a batch of 4 tungsten's ready to go. I usually figure it out by the second or third dip..
this man out here welding in flipflops
Excellent point about the importance of getting up and moving around.
Lmfao, we kept the angle grinders locked up in a cupboard, that way we knew if one of our welders fcked something up 😂 not only do they have to do the walk of shame with a grinder in hand , but the whole area jeered them when the grind sparks started too😂
I think I spend more time grinding tungsten than I do welding....
I should probably work on that.
80% of the time prepping the joint, 1% sharpening and 19% of the time welding.
In an Ideal world that is, when the Tungsten is dipped, the percentages easily add up to 300 % 😂
You could get a lot of sharpened tungsten so you can do a quick change, or are you just looking for an excuse to walk around? Just Joking.
I know it seemed like I was always sharpening tungsten, but now, after 3 yrs of practicing, I might have to sharpen tungsten every now and then. Practice, practice, and practice some more. I bought Aaron’s training and after 3 days and maybe 300 or 400 beads later, I was laying down like I had been welding aluminum or years. Seriously made all the difference for me. And no, Aaron didn’t pay me to write this.
Evet
I cannot imagine with those skills you dunked the tungsten "accidentally". This Kip part was hilarious!
My grinding location is in a separate building in the back yard … I grind 10 or so at once but it does help you pay attention
I keep 10-20 pre-ground tungstens on the welding table, no need to get out and grind 😂
I keep 6, double sided. But i also try and go as long as possible without needing to sharpen them. If i go less than a full week between sharpens, i know ive been screwin up hard.
Hello my friend on that first lap joint what was you frequency at?
Well..
It still happen to my to stuff my tungsten into the paddle especially after a long working day...
Btw
Good job as always 😎✌️
Judging from all the typos in your comment, I think you wrote it after a long day, lol.
You stuffed it that deep and didn't pull out. Baby tungsten expected early April.
You the mostest slam dunked that! A bit of left handed practice?
I try to search for leRn Tig . Found you. Thank you for ur video.
Hi sir I am tig welder from Pakistan. Very nice weld
👍🇹🇷🇦🇿🇵🇰
omg! he IS human! :) ...personally, I never dip....but now I know what it looks like if it ever happens.....
Tell us how to set-up A/V and frequency for almunium welding. PLEASE. HAVE A NICE DAY.
So if I move my grinder further than 1 meter away I'm going to increase my welding skills by 10%. Cool I'll do it.
Aluminum welding is like walking a trail with Jumping Chollas.
I cant tell the difference between filler and tungsten as they both disappear at the same rate
Please make a video how to stop creaking welding with tig welding
I sharpened my tungstens then threw the grinder away. Pressures on now
Thank you so much for video,I’m a new learning for this your video help me a lot.
Great video 6061 🤘
You’re like my welding dad.
Aw.
Nice Welding Job 👍
Do u have merch
Can I have a shirt for first comment 😂😂 love your work man
@@6061 The Stig of Tig autographs?
I allways make sure to have enough spare tips right next to my welding. To make sure I can finish the weld. Otherwise I would have walked a couple miles extra I guess😜
Cool you did make it into the trailer. I wasn't sure till I saw the floor.
If someone welds aluminum in their flip flops you know their really good..💯
Leads to a whole new definition of "hot foot". even worse pun: next time, he will be sure to "top" that…
Its like one of those '' frozen soda'' sculpture things ... very artistic.
Excellent video as always, nice to see even the best can visit the tungsten Spa 😊
I love watching your videos I just wish they were longer that way you could watch your technique cuz you're a bad man when it comes to a TIG. What that wire do or rod
This is nice job ..Mr professor..
Man you do amazing work. You should talk and tell us how. Great stuff and thanks
Sir my question was one which ampere machine should be taken to kill Tig aluminum job welding?
Do you know how to fix aluminum pulse settings still new machine not working
I design difficult to weld joints to challenge my skills. And I have done tungsten grinding outside even though I no longer use thoriated tungsten.
Love the Napoleon Dynamite “ YES “
Tell us how to setup the A/V and frequency for aluminum WELDING PLEASE
Everything is explained in detail on the website 6061.com
Good job bro ini anak study 💪💪💪
Sir you do a great job.
Thanks you videos tutorial next brother 👌👍
All videos, no talking, no tuition (maybe a few text inserts) just watching you work I and others can learn. Impeccable timing mate 👍🏻 😎 seen you draw in last video not too bad, but got this theory that shit hot welders are usually good at other things. Would love to see you on snooker/pool table 👍🏻 any good? Thanks for all the Weld por my friend 😎
So true 👍 good video, thanks
Thank you sir
Didn’t know you could use a gas lense like that with aluminum
Too Good. 👍
how much tig welder making per hour? (on average) (pipe welding)
Entertaining and informative.
Hallo. I want to ask something
Could we use DC Welding Machine for aluminium weld ?
can..with caveats..better off with the special rod for torch burner..or get yourself an ac/dc tig..or two
thanks for the content sir
hobbies include noisy nights of aluminum fabrication and long walks to the bench grinder ....
Nice
I sure do get a lot of exercise 🤣
nice safety flip-flops :D
The walk of shame.
Best👍👍💖
I tried welding with a camera between my legs once and it was truely awful, so I'd blame that for the little accident, it's just an awkward location for a camera, especially for someone with the kind of balls to show off their welds on the internet.
Nice welding
Wow👍
Good welding
Imagine skill
amps ? thanks
Awesome. I have the same napolean vid lol. 👍
i sharpen both ends of the tungsten so i don't have to get up so often .....
👍
I quite grinding my tungsten, I already know I’m going to dip it anyway
Are you trying to say that dipping snuffs your tungsten?
God, have i been there
I just watched someone f*ck up a weld on purpose, or was it?......and it was fun to watch.
Kimat kitni hai
That happens all the time when I sneeze 🤧
Ouuuuhhhh yeahhhhh baby!!!!
At the time of 1:23, you stuck it. Lol. I hate when I get too close with my tungsten. Dipping that shit sucks.
🇧🇷🤩🤩🤩🤩🤩🤩🤩🤩🤩
I never dip my tungsten
👀
>>>>>>>>>>>>>
__
👍🇹🇷
🔥🔥🔥🔥
Me Tig welding ok
👍👍😎👍👍
😂❤
First
You 12?
Nice