Thanks so much for these tutorials! Learned new, important things about that grouping feature that I hadn't thought of before. Much appreciated, your explanations are always easy to follow and detailed. 🌼
Just got my Scan N Cut for Christmas and I'm having fun learning. But there is a LOT to learn, and your very informative video taught me so much. Thank you for posting a great video lesson on the Scan N Cut.
Great tutorial, I have seen many scanncut videos and learned from them, your video makes it more explanatory I have tried to learn all about scanncut but had trouble understanding the alignment feature on the machine you just clear it out for me. I now understand how to use the alignment, I thank you so much that I am saving this video as my favorite 🤗🤗🤗
I just stumbled upon this video and count this my lucky day. I hope I can figure out how to find all of your tutorials. You have demystified this machine for me so very much and I thank you. I have a cm302 used it one time then they came out with the auto blade so I bought that because I could not grasp the blade setting part. I want to keep you in my pocket so I will use my machine more. Like you it fascinates me and I just want to stare and watch it
Excellent video. Your explanation on features were extremely helpful. I have a DX125 for 10 months and sometimes find it a bit frustrating to maneuver. You definitely assisted me with this video. Thank you for being straightforward with your tutorial on these topics.
Thank you, Mel! (big sigh of relief).. I have had my Cut and Scan for almost 2 years unused. After watching your video I am going to give it a try again. You made it easy for to understand.
Wow! Most comprehensive (& entertaining) video on the Scan n Cut! Thank you so much! I have my SDX1200 on order (I live in Australia). I can’t wait to get started! ☺️
What a terrific video. I’ve had my CM350 for years and have considered upgrading to a DX machine but was not sure if there would be enough advantages. You have convinced me that the upgrade is worthwhile. Thanks so much.
Great video full of info and great tips, was very helpful! Thank you for being so truthful!!! Thank you for sharing teaching us all how to use the machine!!!
Thanks. I have had my sdx1200 for a very short time and have only done the sample project. I wanted to cut a 12x12 card into 9 equal squares but can’t figure out how to do it. Any suggestions I just wanted to start out with something easy 😀
Hey Hey I was wondering how to get the scanncut machines to cut inside the figure before it cuts the outer line Such that , if e.g. there is little glue on the mat, so that the figure does not move because the outermost line is cut first, and then cut details inside the figure (as there is a greater chance of it then moving) Can you cut inside first, then the outer line, and can you set it somewhere on Scanncut?
Hi Mel I love my scan n cut. But it is driving me mad. My mats even the new one goes in at a daft angle. Iv reverted back to my c m because it never happened with that one.😒 so sad Patricia.
Hi is there only 1 Brother Canvas Workspace or is there 2 ie 1 for Offline and 1 for Mac please or Online? I am a bit confused when trying to load the program.
Thanks for this tutorial video Mel ,I am going to order the usb because I have had my cm300 scan n cut for years and have never learned to use it 😢 ,when the usb arrives how do I watch it ? I have an iPad Air 2 and an old note book computer 🌸💜🌸💜🌸
Mel please can you help me?, I have just brought the SDX Scan n cut and I have also have CM900. I have got a lot of the starter kits on my cm 900, how do I get them onto my new SDX machine and also set up the Wi-Fi. Also can you use the universal pen holder. I have had my cm900 for quite a few years now and I love it, but I have been hesitating on buying the SDX machine since I first see you on tv creat and craft show and I just wanted it, now I’ve got it I am nervous
Hi Elaine, it may be too long for me to explain over here but if you follow the link there is a manual on setting up the machine: download.brother.com/welcome/doch100517/snc2_wnsg02en.pdf I hope this is helpful, thanks :)
@@TatteredLace Thanks Mel , I have done exactly what you told me to do and hey I done it. Just one more question for you, can I use We R Memory Keepers foiling attachment on the SDX the same way I used it on my cm900 . What would we do with out you Mel I love all your tutorials. Regards Elaine
Thanks for the video, very informative. Can you tell me if create and craft will be selling the SDX2200Disney soon or will they not be a supplying the Disney SDX2200D?
Hi Maralyn, this usually happens when the mat or rollers need a clean - give the mat and rollers both a wipe then let us know if you are still having the same issue :) thanks
Brill tutorial. How do i align letters on a page, that I've added singly, that i wish to weld, so they are level please? Also why in the first demo did the squares align on top of each other, but the Happy Birthday aligned as separate, if you get what i mean> Many thanks xx
I don't think I have come to the right place but can someone help me please I am having trouble with my auto blade chewing up my card when cutting (sdx1200) Trying to cut out charisma is almost impossible Thanks very much
Hi Maralyn, we recommend a couple of things to do. Make sure your mat is tacky and reduce the auto blade pressure in the settings in the Scan n Cut machine. If this doesn't help, you made need a new blade as your current one maybe blunt. I hope this helps :)
Thanks so much for these tutorials! Learned new, important things about that grouping feature that I hadn't thought of before. Much appreciated, your explanations are always easy to follow and detailed. 🌼
Thanks for a terrific tutorial……..well explained 🎉🎉
Great information. I love how you explain the whole process and why. I’ve stressed so much about learning my Machine. Thank you great teacher!
Can you tell me where to find your next video about sending into canvas and back again?
Just got my Scan N Cut for Christmas and I'm having fun learning. But there is a LOT to learn, and your very informative video taught me so much. Thank you for posting a great video lesson on the Scan N Cut.
More please mel these little tutorials are really helpful thank you for being clear and concise
This is such a great tutorial! Thank you so much😊 I hail from Philadelphia PA USA
Great tutorial, I have seen many scanncut videos and learned from them, your video makes it more explanatory I have tried to learn all about scanncut but had trouble understanding the alignment feature on the machine you just clear it out for me. I now understand how to use the alignment, I thank you so much that I am saving this video as my favorite 🤗🤗🤗
I just stumbled upon this video and count this my lucky day. I hope I can figure out how to find all of your tutorials. You have demystified this machine for me so very much and I thank you. I have a cm302 used it one time then they came out with the auto blade so I bought that because I could not grasp the blade setting part. I want to keep you in my pocket so I will use my machine more. Like you it fascinates me and I just want to stare and watch it
Excellent video. Your explanation on features were extremely helpful. I have a DX125 for 10 months and sometimes find it a bit frustrating to maneuver. You definitely assisted me with this video. Thank you for being straightforward with your tutorial on these topics.
Thank you, Mel! (big sigh of relief).. I have had my Cut and Scan for almost 2 years unused. After watching your video I am going to give it a try again. You made it easy for to understand.
Absolutely awesome video. So helpful and taught me a lot about my ScanNCut, thanks!!!
Wow! Most comprehensive (& entertaining) video on the Scan n Cut! Thank you so much! I have my SDX1200 on order (I live in Australia). I can’t wait to get started! ☺️
What a terrific video. I’ve had my CM350 for years and have considered upgrading to a DX machine but was not sure if there would be enough advantages. You have convinced me that the upgrade is worthwhile. Thanks so much.
Great video full of info and great tips, was very helpful! Thank you for being so truthful!!! Thank you for sharing teaching us all how to use the machine!!!
Wonderful video, so helpful. Thank you!!!
Thank you, this was so helpful.
Great video thanks but what happened to the next one that you mentioned?
Thank you so much for the video. New tongue scan and cut, so very interesting without being to overwhelming.
Great explanations. So helpful. Thanks
Thank you so much. I have a much better understanding of what I can do
Great information !!! Thank you!
Great video. Thanks. How do I find the Standard Blade List you made?
I’ve used Tim Holts embossing pen to write It works Great
Terrific!
This was so interesting. I bought the SDX 1200 and the only thing in mine was one cutter....
HELLO Nelida Julia & LEGIONS!!👺🔪🦵🏼🚑🚨🚓⚰️😳🤦🏻♀️😭🤚🏼
Great video thank you x
Thanks. I have had my sdx1200 for a very short time and have only done the sample project. I wanted to cut a 12x12 card into 9 equal squares but can’t figure out how to do it. Any suggestions I just wanted to start out with something easy 😀
Hey Hey
I was wondering how to get the scanncut machines to cut inside the figure before it cuts the outer line
Such that , if e.g. there is little glue on the mat, so that the figure does not move because the outermost line is cut first, and then cut details inside the figure (as there is a greater chance of it then moving)
Can you cut inside first, then the outer line, and can you set it somewhere on Scanncut?
Hi Mel I love my scan n cut. But it is driving me mad. My mats even the new one goes in at a daft angle. Iv reverted back to my c m because it never happened with that one.😒 so sad Patricia.
Does the scan n cut allow you to use your dies that u have or can u not use them at all anymore? Thank you.
Hi is there only 1 Brother Canvas Workspace or is there 2 ie 1 for Offline and 1 for Mac please or Online? I am a bit confused when trying to load the program.
Mel can you show me how to put a mat round a say happy birthday to you thank you
Did I hear you say I can get a standard blade for my SDX?
oh wow thank you so much for doing this wow
Thanks for this tutorial video Mel ,I am going to order the usb because I have had my cm300 scan n cut for years and have never learned to use it 😢 ,when the usb arrives how do I watch it ? I have an iPad Air 2 and an old note book computer 🌸💜🌸💜🌸
Hi Mel, can you use the embossing tool with the draw command - I need to be able to create and draw a solid score line for folds on 3d items?
Is the USB still available?
The DX more precise in cutting outlines? My scan n cut 2 needs calibrating all the time because it leaves white in areas around the outline.
Thank you!!!
Mel please can you help me?, I have just brought the SDX Scan n cut and I have also have CM900. I have got a lot of the starter kits on my cm 900, how do I get them onto my new SDX machine and also set up the Wi-Fi. Also can you use the universal pen holder. I have had my cm900 for quite a few years now and I love it, but I have been hesitating on buying the SDX machine since I first see you on tv creat and craft show and I just wanted it, now I’ve got it I am nervous
Hi Elaine, it may be too long for me to explain over here but if you follow the link there is a manual on setting up the machine: download.brother.com/welcome/doch100517/snc2_wnsg02en.pdf I hope this is helpful, thanks :)
@@TatteredLace Thanks Mel , I have done exactly what you told me to do and hey I done it. Just one more question for you, can I use We R Memory Keepers foiling attachment on the SDX the same way I used it on my cm900 . What would we do with out you Mel I love all your tutorials. Regards Elaine
So the drawing of the fine line, could that be done in foil? I expect so, just asking for conformation. I really enjoyed watching this. Thanks Mel.
I am having problems with the embossing on sdx900 the tool this cutting the embossing pad instead of embossing it. please help.
Thanks for the video, very informative. Can you tell me if create and craft will be selling the SDX2200Disney soon or will they not be a supplying the Disney SDX2200D?
Hi Terri, we aren't aware of any plans to however it may be best to check with Brother directly just in case :)
I can’t find next video either, what chance have I got making the machine work???
I have cm800q is it still current or do I need to upgrade
Hi. Can you cut multiple labels at the same time as well .Thank you
Which version of the SDX model is yours?
Does the ScanNcut tips and Technique usb include the SDX900 machine
Hi Margaret, all Scan N Cut machines are sold separately.
Are you going to make another usb for the DX?
Sorry to bother you yet again when cutting (sdx1200)my mat is slipping from side to side How can I stop this Thanks very much Maralyn
Hi Maralyn, this usually happens when the mat or rollers need a clean - give the mat and rollers both a wipe then let us know if you are still having the same issue :) thanks
@@TatteredLace thanks I will try
Brill tutorial. How do i align letters on a page, that I've added singly, that i wish to weld, so they are level please? Also why in the first demo did the squares align on top of each other, but the Happy Birthday aligned as separate, if you get what i mean> Many thanks xx
Hi Be, we have recently posted a video on letters and how to line them up and resize them: czcams.com/video/SBzAuyY6_cA/video.html
I don't think I have come to the right place but can someone help me please I am having trouble with my auto blade chewing up my card when cutting (sdx1200) Trying to cut out charisma is almost impossible Thanks very much
Hi Maralyn, we recommend a couple of things to do. Make sure your mat is tacky and reduce the auto blade pressure in the settings in the Scan n Cut machine. If this doesn't help, you made need a new blade as your current one maybe blunt. I hope this helps :)
@@TatteredLace thanks so much I've lowered the pressure got a new blade so I will try a new mat Hope that helps
Hi there do you know weather or not you can cut out a topper on the scan n cut without a black line around it
Hi Heather, can you clarify what topper you are trying to cut out?
It’s a bird called a kingfisher
@@TatteredLace it’s a bird called a kingfisher
@@heatherporter9558 From what collection?
@@TatteredLace Hi there it’s out of a craft magazine i brought from the shop
Mel I
Wonderful video, Thank you so much!! Do you’ve a Facebook group? I subscribe to you today so glad I found your CZcams channel❤️
Does the scan n cut allow you to use your dies that u have or can u not use them at all anymore? Thank you.