Video není dostupné.
Omlouváme se.
Tutorial: Getting TFT LCD displays working
Vložit
- čas přidán 6. 08. 2024
- Tutorial: Learn how to get common TFT LCD displays working with Teensy or Arduino. Shown is how to use these SPI displays with Arduinos and Teensy. Wiring, code, and a short example using a 2.8 inch TFT is included. Whether you use the Adafruit_ILI9341 or ILI9341_t3 libraries, hopefully this lesson will help you get your display working.
Other useful tutorials
Temperature sensor shootout: • Temperature sensor sho...
Using 7-segment LED's: • Using 7-segment displa...
Writing and reading to SD cards: • Tutorial: Writing and ...
Saving settings even during MCU power down: • Tutorial: How to save ...
Turning stuff on or off: • Tutorial: Use your MCU...
Writing analog signals/voltages: • Tutorial: Use analogWr...
Using digital sensors: • Tutorial: Use digitalR...
Using analog sensors: • Tutorial: Use analogRe...
Talking to your Arduino: • Tutorial: How to talk ...
Some fun projects to build
Build a 3D printer filament meter: • Build a 3D printer fil...
Homemade motorized table saw fence • DIY motorized table sa...
High"er" res homemade Thermal Camera for $100: • DIY high-er res Therma...
DIY Garage Parking Assistant: • DIY Garage Parking As...
Was this helpful? Leave a comment with tips and suggestions
Good to see examples for the Teensy
Many more examples with teensys are coming…
thanks, you do great videos. Wish there were more :)
Waw, this was really interesting and usefull ! I got my mind made up now !
Glad it was helpful!
if a lcd display says 5v then all the sdl sca pins use 5v and vice versa?
really depends on the display. Some accept 5v0 on Vcc but have an onboard regulator for power and data pins *should* be 5 volt tolerant. If the display has an SD card some mfg's put series resistors to protect the card. you can always use a voltage divider for data lines if the display has issues
@@KrisKasprzak st thr 5v display operates at 5v and the card reader operates at 3.3v?
@@taranagnew436 Card readers run on 3V3, most displays are 3V3 as well. Depending on the display they may have level shifters or resistors to drop the voltage to a safe level.