Why didn't you weed out the part you wanted blank before putting on your application paper? It would have took you about 30 seconds instead of 10 mins.
My software will not open the vinyl spooler, it just says “not responding” and crashes. Any ideas how to fix that? I just got it and havent even been able to use it because of this issue
Thanks for the input now that I have a bit more understanding and especially about the big cuts. How would the comparison be with a cameo 4 pro and this be or cutter
Thanks for good help!! Got a question my Vevor plotter stops halfway how can i Fix?? Its connected with usb cable. Only small things work large plots stopping....
This was my first vinyl cutter & it worked out fine though understanding graphics software helped me not that you can't figure it out. If you think the software curve is to much then the Cricut would be better.
cricut is easier however if you want to make larger decals then this vervor would be better, as far as software goes, any software that can make vector images such as Adobe Illustrator, or freebees like GIMP, can also do it. Always use SVG files.
Height or length in this case I "believe" is only limited by the material on the roll & more likely due to the software. I haven't exceeded anything thus far.
I'm not sure why they use "plotter" in the product name as it's more dedicated to vinyl cutting. If they had pens that fit the holder perhaps you could print but if printing is your goal look for a true plotter.
Good question! The manual only states max width at 780mm (30.7"). I imagine the only limitation is the length of your roll of material & your software. Next time I fire it up I'll look at the program to see if theres's any more info in the application.
Normally you peel the cutted vinyl first and then put on the application tape...
Why didn't you weed out the part you wanted blank before putting on your application paper? It would have took you about 30 seconds instead of 10 mins.
That is exactly what I was thinking. I have vinyl plotting, weeding and transferring experience and it appears that our friend pond, does not.
Hello.What do u think after some time using it? would u buy it again?
When setting up the stand did you use a drill I have a normal screwdriver and can not get the screws locked in
Yeah i did, its way too hard without one but it is possible tho but very hard
My software will not open the vinyl spooler, it just says “not responding” and crashes. Any ideas how to fix that? I just got it and havent even been able to use it because of this issue
Check with the software manufacturers site for any updates & make sure Windows is up to date.
Thanks for the input now that I have a bit more understanding and especially about the big cuts. How would the comparison be with a cameo 4 pro and this be or cutter
This is the only cutter I have experience with so I can't really comment on the others.
Peut on avoir la version française. Ou traduction. Nous ne trouvons pas la gomme quand on veut faire des modifications. Merci de vôtre aide
You probably should contact the software manufacturer for that.
Having trouble finding the vinyl in that length. Did you find it anywhere specific? I feel they tend to have sizes that cater to the circuits
You can find wider material here for example: signwarehouse.com/pages/adhesive-vinyl
Hope this helps you:-)
@@Pondsisawesome124 thank you
Gostaria de saber se possível montar se outras outros suportes de venil no plotter o meu so leva duas rodinha
No se necesita ningún ensamblaje más allá de lo que se muestra en el video, por lo que debería estar bien.
Thanks for good help!! Got a question my Vevor plotter stops halfway how can i Fix?? Its connected with usb cable. Only small things work large plots stopping....
Is the computer getting hung up somehow?
Turn off any screen saver on pc.
How does cutters from Vevor detect the registration marks from a printed vinyl sticker?
I don't believe it has any way of recognizing something already printed.
Do you know what software to how to cut window tint? With sign, master pro
You'd need measurements of the window. Not sure if pro tinters even use these to cut film.
Would it be better to get starter on a Cricut or a vevor?
This was my first vinyl cutter & it worked out fine though understanding graphics software helped me not that you can't figure it out. If you think the software curve is to much then the Cricut would be better.
cricut is easier however if you want to make larger decals then this vervor would be better, as far as software goes, any software that can make vector images such as Adobe Illustrator, or freebees like GIMP, can also do it. Always use SVG files.
Will this work for window tint?
I haven't tried it but I don't see why not. What do tint shops use & where do they get the patterns?
I know cricut a cutting mat is used with the vevor machine Is a mat used, in case the material is thin?
The instructions don't mention a mat. That said there may be one you could use depending on the material.
You can use any mat
Do you know how big or in this case, how tall you can cut a decal with this machine?
Height or length in this case I "believe" is only limited by the material on the roll & more likely due to the software. I haven't exceeded anything thus far.
Do you think window tint could be cut with this machine?
I've wondered this myself, might be interesting to experiment with for sure!
how wold this work with a printer after printinga full color decal
Not sure of your question....
Can you cut paper foam with this?
Haven't tried but I have wondered!
Since it's a plotter, does it print as well?
I'm not sure why they use "plotter" in the product name as it's more dedicated to vinyl cutting. If they had pens that fit the holder perhaps you could print but if printing is your goal look for a true plotter.
Do these make vinyl stencils! Or just the stickers?
Should cut the vinyl for either just fine.
stencils are the same thing just use the negative space instead.
What force and speed did you use to cut your vinyl?
I show those at 10:48 in :-)
Thanks
Hi ,how much is that cutter?
Around $380 on Amazon or direct from the Vevor site in the description.
Whats the max length you can cut?
Good question! The manual only states max width at 780mm (30.7"). I imagine the only limitation is the length of your roll of material & your software. Next time I fire it up I'll look at the program to see if theres's any more info in the application.
@@Pondsisawesome124 Thank you so much!!
you didn't weed the decal
I did it off camera.
Do you recommend this or a cricket
I looked at the Cricut for some time, the problem is it's simply to small for say yard signs, etc. & I didn't want to be limited by size.
Merge sa faci textul in puncte cu programul
I know it's scalable & I believe you select by point size.