i bought bolt and nozzle ra tech complete with steel head so when i take out stock bolt and replace bolt ra tech they not fit nozzle with chamber base aluminum stock they stuck between nozzle head and chamber base , stock bolt and nozzle orginal they fit normal i don’t know why
nozzle head very fit in chamber base that the same but i dont adjust spacing , just use it and they will fit together i let the nozzle head eat chamber base for my 2ghk ar that same problem and i did it that why in the same😅 but not good if you change to steel chamber base that will stuck
น่าสนใจมากครับพี่ ว่าแต่จะมีหัวน๊อตเซิลของ Golden Eagle ที่ปรับได้แบบนี้บ้างไหมครับ ขอบคุณครับพี่
ปรับไม่ได้ครับของge ไม่มีของแต่งขายด้วยครับ
ต้องเปลี่ยนเป็นเลือกใช้แก๊สแทนครับ ถ้าจะลดหรือเพิ่มfps
ถ้าใส่ไป fps เท่าของเก่าไหม ประมาณ400fps รือต้องพรับลง
fps อยู่ที่ปรับเอาครับ มันปรับได้อยากเบา อยากแรง
แต่จะมาทางปรับลงมากกว่า ปรับขึ้นได้สูงกว่าเดิมนิดหน่อยครับ
i bought bolt and nozzle ra tech complete with steel head so when i take out stock bolt and replace bolt ra tech they not fit nozzle with chamber base aluminum stock they stuck between nozzle head and chamber base , stock bolt and nozzle orginal they fit normal i don’t know why
nozzle head very fit in chamber base that the same
but i dont adjust spacing , just use it and they will fit together
i let the nozzle head eat chamber base
for my 2ghk ar that same problem
and i did it that why in the same😅
but not good if you change to steel chamber base that will stuck
so your meant keep orginal chamber just exchange nozzle ra tech and let it eat chamber aluminum and then they fit
@@windynguyen1511that's right sir😢
how you make nozzle head smooth with chamber base i meant it eat chamber base aluminum
i don't trim or make anything, just use and cleaning scrap after them scratch
What is the purpose of yellow slotted screw on the top of nozzle?? Is that power brake?
i not sure but it not for adjustment (maybe magnet lock for nozzle valve)
just only adjust fps inside nozzle valve
can the nozzle of npas just travel a bolt carrier without firing bb by adjusting??@@MairunA
before adjust hold bolt and adjust by twist nozzle valve no firing
but how do you know what power that you adjust , you need fire with chrono tester
actually I delivered ghk m4 with ratech npas today. when i pull the trigger, the bolt carrier work normally but bb doesnt fired. @@MairunA
@vkskfk77 maybe that too low gas to put bb out
check inner barrel , bb get stuck in there or not
if stuck , turn fps up for push bb out
nice n chill.
😉