It was beautiful, but very time consuming, economically unreasonable, and consumes a lot of elements. It takes up a lot of space, and it's a very common and unnecessary thing to do.
Arey bhai pehly english course karlo please. Warna urdu mein boloo Q sub ko irriated karty hon. Please waiver ki taraf sey request hai. App ko Nahi atii english. Doing good job but please english ki mah behan 1 mat karlo...
Impressive patience! It is a great example for trading cost with time. I would rather replace those breadboard circuits with custom made PCBs, it would greatly reduce the tedious wiring need/time at the cost of the PCBs and the less tedious PCB CAD design.
Well done! I so admire people that do projects like this. It would be great if you could sell the wooden jigs - or indeed all components as part of a kit.
I wonder if there is a commercial Jig you can get to do this. I see the 16^3 arrays out there looking pretty impressive. If they sold these already prepped, I bet people would buy it...
Most complicated, most confusing, most amazing, most spectacular, most entertaining, most beautiful thing I have seen on CZcams. Really like your patience
That is a perfectly done project. Congrats. Very informative and detailed explanations and really great patience, sir. I've saved that project for my time in retirement and I'll make it in a couple of months. Bravo.
ok i have decided to go with your guide for building my RGB LED cube. i have som experience with electronics and soldering, i have made some tesla coils and other projects but this is on another level. thank you for making this guide, i have ordered the parts ^^
Great project, I might try to replicate. However, few toughts: I would try to fit 4/8 channels on one board (maybe one/two boards for each color?) and make a backplane to fit the boards (with the node controller and power lines) . Do not fear to play with the placement of components and maybe try to use the components leads (resistors mainly) to save some wired connections. That way leave less room to errors. Nice layout of the boards, but in my opinion, could fit more circuits on one board.
Wow! This is the best led cube I've seen. I wish there's a pcb layout for etching method and for easier way of making it. Thank you for this wonderful video sir!
The cube was always a great project but dude you could have saved more time and headache if you did each colour on 1 circuit board each, preferably "new" ones not used. All 8 channels would fit nicely on 1 board. So instead of having 7/8 boards you would have like 4. It would of saved you time and troubleshooting. Just watching the soldering of them gave me a stroke and I'm a electronics major. Overall good job.
Pure genious I wouldn't even dare to try this by myself... Dunno if it is harder to create the code or the electric part... Sir, this is art. I mean THIS IS FUCKING ART, CONGRATULATIONS SIR YOU DID IT
If you play this video at 1x speed, you can hear your plants grow. I just fell asleep nearly 40 times over the length of this video, but i finally made it to the end. Never mind, i would not do it again...
Can you please clarify if ALL shift registers (including the one on the ANODE board) feed their signal from Pin-9 to the following shift register? The reason I ask is that the schematic does NOT show the shift register on the ANODE board as being connected to the first BLUE cathode board. Also, the Arduino data pin shown on the schematic is NOT being bussed down to the first BLUE board so how does data get to the first BLUE board???
Excellent video Sir! A very labor intensive project that you were able to make each step very clear. Outstanding and thank you for sharing your expertise !!! WELL DONE!
As per schematic drawing there is no vcc and gnd to transistor circuit of individual 595 ic. But in yt vdo u have given power supply to all Is VCC and gnd to be connected to all 24 transistor circuits ? further all shift resistor are required to be connected to 5v of aurdino board? Pl respond and Co operate I had requested to provide schematic and code for testing of boards. Pl upload it
Dear I have recently completed building RBG cube after inspiring from ur video. I have assembled boards also. Before putting them on circuit I want to test it. Kindly share code of test program for board
Hi, In your schematic the pin 9 on IC1 is disconnected and also pin 14 on IC2. Is that correct? or must connect pin 9 on IC1 to pin 14 on IC2. Thanks for the video.
I am trying to figure the exact same thing out. I just built the ANODE board, but the schematic does not buss the arduino read pin down to the first Blue board.. If anybody gets an answer to this it would be really appreciated
Fantastic project! An amazing amount of wiring! Why didn’t you make etched boards? Wouldn’t that reduce the soldering errors? I am amazed about the skills you have shown by making, troubleshooting, programming and finishing this cube! Great job!!!!!!
a query if I want to replace the transistor 2n3904 (of the platelets of the catados) with a transistor 2n 2222 could only change it or I also have to change the resistance of 1k and 100 ohms?
Hello Good health, but why do you say the card information is missing? We would appreciate it if you made a more explanatory video. We want to do it too. thanks
Hello. Im a bit confused why is there no serial input on the very first BLUE 74HC595 IC. It is not inluded in the drawing. Did you use the serial output of ANALOG IC as an INPUT to the very firt BLUE IC?
I am trying to get an answer to this exact question myself. if I look at the schematic, it appears as if the ANODE board has its own dedicated shift register, however the schematic is not bringing down the Arduino data pin as a bussed signal down to the first Blue board. I just completed the ANODE board but =pin-9 on its shift register is open and not being used.
Hello, the transistor of the video is not a 2n3904? you connect the 1k resistances from the base of the transistor to the source of the mosfet and the collector at 74 hc?
I like your work! In your schematic diagram you have on the Anode board Shift register Pin 13 connected on the Arduino Pin 04 and the Blue layer 1 as well, but after that all the others Shift register Pin 13 is connected on the Arduino Pin 13. Can you verify please, thank you.
Well explained project. I'm new to electronics. I really like to build system like this. Can you guide me to a tutorial or a book which is for complete beginners?
Hello We are students of a certain high school in Taiwan We use your program to create a feature but ran into some problems Is it convenient for you to answer some questions?
1) The music is unnecessary and makes it that much harder for someone like me to understand what your saying since you have a strong accent. 2) Your an electronic genius for having the knowledge to make all this work with an Arduino 3) But sadly this could all be done 1,000 times simpler with addressable RGB LED's like Adafruit.com NeoPixels 4) What if any is the benefit from designing a matrix this way?
Hello. I am a beginner in electronics and would like to confirm that pins 11 and 13 of CIS U1 and U2 are correctly connected to the arduino. Because of all the other CIS, 11 is inverted by 13.
Dear hello good observation I have also made this cube but facing some issue like u I’m also not an electronic Engr but after seeing number of time his vids I noticed that As per schematic drawing there is no vcc and gnd to transistor circuit of individual 595 ic. But in yt vdo power supply is given to all Is VCC and gnd to be connected to all 24 transistor circuits ? further whether all shift resistor are required to be connected to 5v of aurdino board? Pl respond and Co operate I had also requested to provide schematic and code for testing of boards.
I actually have no idea what I'm seeing. I recycle and have torn a lot of things apart for the copper. Would this be considered 'primitive' considering what's being done with chips, shelacque, wafering, etc.? Could we be looking at development of 3-D television? Throw some spun fiberglass, cotton candy, crystals in there and use auras to create ghosts? I'm guessing that the programming is another matter entirely in how to get these crossovers to function for desired effects (Microsoft)? Reminds me of that movie about Steve Jobs and they spun a few moments of him swimming through numbers & concepts . . . and then Wozniak accusing him of not even being on board. Interesting stuff. Thanks.
can someone explain why it was okay for his different components to all be combined in a single line of solder. I thought that would mess up the circuit.
It's because of the way the neutrals work. The colors are each vertical, with the neutrals horizontal. Only one level at a time is activated by the neutrals, so while the whole cube has current for a single layer at a time, only one layer is active. It flickers a little because it flips between layers in a sequence.
Bu projeyi şimdi yaptım ama çalışmadı. Acaba devre şeması doğru mu yada bir eksik bağlantı var mı ? Bununla ilgili bir kaç sorum olacak size 1) Katot kontrol devresindeki 1.entegre ile 2. Entegrenin 11 ve 13 nolu pin girişleri farklı acaba doğru mu ? 2) Katod kartındaki 1. entegreninde 14 nolu ucu boşta mı kalacak ? Yardımcı olursanız sevinirim... şimdiden teşekkür ederim Şuan devre 2 hamle yapıp duruyor. Sabit kalıyor. Lütfen yardım edin 🤗
Please subscribe and support for gaming videos czcams.com/channels/hso26jPwvEbGbts5WPpmoQ.html
It was beautiful, but very time consuming, economically unreasonable, and consumes a lot of elements. It takes up a lot of space, and it's a very common and unnecessary thing to do.
@@alirezaojifard4368 Other People would call it "Hobby"!
Arey bhai pehly english course karlo please. Warna urdu mein boloo Q sub ko irriated karty hon. Please waiver ki taraf sey request hai. App ko Nahi atii english. Doing good job but please english ki mah behan 1 mat karlo...
@@alirezaojifard4368 its called a hobby. people have those
I absolutely loved it. I am definitely going to do this… Thank you!!
Impressive patience! It is a great example for trading cost with time. I would rather replace those breadboard circuits with custom made PCBs, it would greatly reduce the tedious wiring need/time at the cost of the PCBs and the less tedious PCB CAD design.
Well done! I so admire people that do projects like this.
It would be great if you could sell the wooden jigs - or indeed all components as part of a kit.
I wonder if there is a commercial Jig you can get to do this. I see the 16^3 arrays out there looking pretty impressive.
If they sold these already prepped, I bet people would buy it...
Most complicated, most confusing, most amazing, most spectacular, most entertaining, most beautiful thing I have seen on CZcams. Really like your patience
Glad you liked it!
That is a perfectly done project. Congrats. Very informative and detailed explanations and really great patience, sir. I've saved that project for my time in retirement and I'll make it in a couple of months. Bravo.
ok i have decided to go with your guide for building my RGB LED cube. i have som experience with electronics and soldering, i have made some tesla coils and other projects but this is on another level.
thank you for making this guide, i have ordered the parts ^^
your solder ability,circuit designing and explanation step by step till completion is just superb,thanks for sharing.keep it up.
Thanks 😊
Love the soldering Jigs.... I have tried soldering LEDs in a row, I never thought of this... 👍
I agree, I worked in electronics in the 90's and these are the sort of jigs clever folk came up with all the time.
Great jig work I say 😁
Great project, I might try to replicate.
However, few toughts: I would try to fit 4/8 channels on one board (maybe one/two boards for each color?) and make a backplane to fit the boards (with the node controller and power lines) . Do not fear to play with the placement of components and maybe try to use the components leads (resistors mainly) to save some wired connections. That way leave less room to errors. Nice layout of the boards, but in my opinion, could fit more circuits on one board.
Wow! This is the best led cube I've seen. I wish there's a pcb layout for etching method and for easier way of making it. Thank you for this wonderful video sir!
Yes if there is a pcb layout then we can just send it to online pcb makers so it would take less space and we can put all into the wooden box
The cube was always a great project but dude you could have saved more time and headache if you did each colour on 1 circuit board each, preferably "new" ones not used. All 8 channels would fit nicely on 1 board. So instead of having 7/8 boards you would have like 4. It would of saved you time and troubleshooting. Just watching the soldering of them gave me a stroke and I'm a electronics major. Overall good job.
You have Patience from other dimensional world🙏🏻
After seeing this video....I'll drop tha idea of making led metric🙄🙄😂😂
😂
You have done extremely good job, and can you please upload the anode & shift register board test code and schematic which you have used. Thanks
experiența își spune cuvântul, această lucrare , merită toate laudele plus toate felicitările, în plus îi doresc mult succes și numai bine.
9:42 awesome jugaad 😀😀
Pure genious
I wouldn't even dare to try this by myself... Dunno if it is harder to create the code or the electric part...
Sir, this is art.
I mean
THIS IS FUCKING ART, CONGRATULATIONS SIR YOU DID IT
Pretty good kid. You got you electronic "Organized" stuff happening.
If you play this video at 1x speed, you can hear your plants grow. I just fell asleep nearly 40 times over the length of this video, but i finally made it to the end. Never mind, i would not do it again...
hello, on the cathodes circuit diagram, the emitter of 2n3904 is not connected to the gnd, is this an oversight? is that normal? thank you.
Can you please clarify if ALL shift registers (including the one on the ANODE board) feed their signal from Pin-9 to the following shift register? The reason I ask is that the schematic does NOT show the shift register on the ANODE board as being connected to the first BLUE cathode board. Also, the Arduino data pin shown on the schematic is NOT being bussed down to the first BLUE board so how does data get to the first BLUE board???
Öğrendiyseniz benide bilgilendirirmisiniz?
Excellent video Sir! A very labor intensive project that you were able to make each step very clear. Outstanding and thank you for sharing your expertise !!! WELL DONE!
hi, i am working on 8*8*8 normal led cube. can you tell me how to write "sine wave function"(ripple effect ) function .
Respect for patience!
Please make that music go away...
back at the days great thinkers invented a button and called it the mute button, use it
@@miharbi5 maybe he wants to hear when the creator is talking? this music is awful
@@0rez why every video is obsessed with this music? whats the point?
Helló
As per schematic drawing there is no vcc and gnd to transistor circuit of individual 595 ic. But in yt vdo u have given power supply to all Is VCC and gnd to be connected to all 24 transistor circuits ? further all shift resistor are required to be connected to 5v of aurdino board?
Pl respond and Co operate I had requested to provide schematic and code for testing of boards. Pl upload it
You are a prototyping expert my friend.
Lavoro ben fatto, pulito ed elegante. Complimenti!
Dear I have recently completed building RBG cube after inspiring from ur video. I have assembled boards also. Before putting them on circuit I want to test it. Kindly share code of test program for board
Hello I come from Vietnam . I find the things you do really fascinating
What a projekt. I'm a absolute beginner, but i see what 4 skills you need to do something like that, respekt 😎👍👍
Hi,
In your schematic the pin 9 on IC1 is disconnected and also pin 14 on IC2. Is that correct? or must connect pin 9 on IC1 to pin 14 on IC2.
Thanks for the video.
I am trying to figure the exact same thing out. I just built the ANODE board, but the schematic does not buss the arduino read pin down to the first Blue board.. If anybody gets an answer to this it would be really appreciated
Fantastic project! An amazing amount of wiring! Why didn’t you make etched boards? Wouldn’t that reduce the soldering errors? I am amazed about the skills you have shown by making, troubleshooting, programming and finishing this cube! Great job!!!!!!
Excellent great very good experience nice job. God bless you and your family .Thankyou 💐💐💐💐💐
👍👍👍👍👍👍👍👍👍👍👍👍👍
Someone get this man a JLC PCB sponsorship, my head hurts!
a query if I want to replace the transistor 2n3904 (of the platelets of the catados) with a transistor 2n 2222 could only change it or I also have to change the resistance of
1k and 100 ohms?
Hello
Good health, but why do you say the card information is missing? We would appreciate it if you made a more explanatory video. We want to do it too. thanks
Sir
very complicated project
but looking so good 👍
we learned! every best result take time, very good work and explanation ! keep it up.
Hello. Im a bit confused why is there no serial input on the very first BLUE 74HC595 IC. It is not inluded in the drawing.
Did you use the serial output of ANALOG IC as an INPUT to the very firt BLUE IC?
I am trying to get an answer to this exact question myself. if I look at the schematic, it appears as if the ANODE board has its own dedicated shift register, however the schematic is not bringing down the Arduino data pin as a bussed signal down to the first Blue board. I just completed the ANODE board but =pin-9 on its shift register is open and not being used.
Best tutorial the word!!Tanks!!!
Bro Cathode control Boardil Transistors onnum Power ilek connect cheythitillalo circuitil.. GNd or +5v ilek Kodukano?
Bro Pinne Anode control Ic nu Serial Output Eduthit Cathode IC lek Serial Inputilek Kodukande?
Yazınızı biraz daha açıklayacı yazarmisiniz acaba?
Impressive -- thanks for the step-by-step. I'd love to build one of those. Can you tell us more about the programming for the display activities?
Hello, the transistor of the video is not a 2n3904? you connect the 1k resistances from the base of the transistor to the source of the mosfet and the collector at 74 hc?
Stunning work my friend.
Thank you! Cheers!
Wow this has got the craziest example ever certainly there must be a simpler way and one that's not got a hundred wires just laying around 😳
മലയാളി ആണല്ലേ😁😁
Sound കേട്ടപ്പോ തോന്നി..😁
എന്തായാലും project പൊളിച്ചു ട്ടാ..😍😍😍
നല്ല effort എടുത്തിട്ടുണ്ടല്ലേ..
കൊള്ളാം സംഭവം😍😍
Great work done by you, full support from Electronics Library
Thank you! Cheers!
I'm a beginner in electronic. But for me, looks like a good project to learn soldering.... Hahahahaha! Thanks...
You can do it!
what work! magnificent! well done!
Nice project
That was a lot of work !
thanks
I like your work! In your schematic diagram you have on the Anode board Shift register Pin 13 connected on the Arduino Pin 04 and the Blue layer 1 as well, but after that all the others Shift register Pin 13 is connected on the Arduino Pin 13. Can you verify please, thank you.
അനിയാ സംഭവം സൂപ്പർബ് ആണ് കലക്കി..
You are brilliant 👌..
Background music വല്ലാതെ ഡിസ്റ്റർബ് ആണ്..
Anyways all the best
Thanks bro,
Well explained project. I'm new to electronics. I really like to build system like this. Can you guide me to a tutorial or a book which is for complete beginners?
Increible trabajo. Felicitaciones
I hope you are from South India 😁
That too from Kerala..
am i right Sir
Ya
@@ElectronicsDemon I am also from Kerala.....( Palakkad )
Subscribed and will be using this tutorial. Thanks mate.
ThAnks
💖👍🔥 thank you for sharing the method
enormous work. Well done
Hello
We are students of a certain high school in Taiwan
We use your program to create a feature
but ran into some problems
Is it convenient for you to answer some questions?
looks good.nice and straight.
How long did it take you to programme the arduino?
Upon compiling "TCCR1A" was not declared in the scope ?
1) The music is unnecessary and makes it that much harder for someone like me to understand what your saying since you have a strong accent.
2) Your an electronic genius for having the knowledge to make all this work with an Arduino
3) But sadly this could all be done 1,000 times simpler with addressable RGB LED's like Adafruit.com NeoPixels
4) What if any is the benefit from designing a matrix this way?
may be i am a crazy man ;)
Very nice made video...Light is changing alltime...How many days you needed to finish the welding ?!?
Great Project Buddy, Can i do this for common Cathode Leds as well?? If yes then what would be the changes. Please respond.
hello sir, please do a led matrix video with more details like this one.
Hello.
I am a beginner in electronics and would like to confirm that pins 11 and 13 of CIS U1 and U2 are correctly connected to the arduino. Because of all the other CIS, 11 is inverted by 13.
Dear hello
good observation
I have also made this cube but facing some issue like u I’m also not an electronic Engr but after seeing number of time his vids I noticed that As per schematic drawing there is no vcc and gnd to transistor circuit of individual 595 ic. But in yt vdo power supply is given to all
Is VCC and gnd to be connected to all 24 transistor circuits ? further whether all shift resistor are required to be connected to 5v of aurdino board?
Pl respond and Co operate I had also requested to provide schematic and code for testing of boards.
You are very talented bhai
Gostei do Projeto . Very good . From Brazil .
WTF !!! Well done, man!!!
Hii sir please reply😢😢 mera pass ak rgb led cube code hai use code mein error hai kya thik kar paoge..
what are the measurements for the jig?
Very intelligent work preparation.
Tú trabajo es increíble
anode is positive and cathode is negative lead?
Sir what is the total cost for making this cube including all the components like capacitor resistors etc.
I actually have no idea what I'm seeing. I recycle and have torn a lot of things apart for the copper. Would this be considered 'primitive' considering what's being done with chips, shelacque, wafering, etc.? Could we be looking at development of 3-D television? Throw some spun fiberglass, cotton candy, crystals in there and use auras to create ghosts? I'm guessing that the programming is another matter entirely in how to get these crossovers to function for desired effects (Microsoft)? Reminds me of that movie about Steve Jobs and they spun a few moments of him swimming through numbers & concepts . . . and then Wozniak accusing him of not even being on board. Interesting stuff. Thanks.
Que madera usas para hacer las plantillas
You make it harder by using common anode LED.. common cathode will make your circuit much simpler and easier to program..
can someone explain why it was okay for his different components to all be combined in a single line of solder. I thought that would mess up the circuit.
It's because of the way the neutrals work. The colors are each vertical, with the neutrals horizontal. Only one level at a time is activated by the neutrals, so while the whole cube has current for a single layer at a time, only one layer is active. It flickers a little because it flips between layers in a sequence.
Super
Meus parabens perfeito muito inteligente
I wish the cube wiring part would be available as a ready made unit. I can't wire up the whole thing due to weak health
Ebay is your friend. Auracube
Hello, I was wondering if I could send the base scheme to fit the LEDs
Can I use common cathode RGB LEDs??
Damn awesome 🔥🔥
Excellent project bro.
I'm guessing you've studied Electrical Engineering. Great job.
Thank you so much buddy, deserve d a subscribe
Wow, this is really so well done and easy to follow. Thank you for making this video.
kerala power big fan sir
what if i use COMMON cathode leds
Very good job!! Imressive!
Bu projeyi şimdi yaptım ama çalışmadı. Acaba devre şeması doğru mu yada bir eksik bağlantı var mı ? Bununla ilgili bir kaç sorum olacak size
1) Katot kontrol devresindeki 1.entegre ile 2. Entegrenin 11 ve 13 nolu pin girişleri farklı acaba doğru mu ?
2) Katod kartındaki 1. entegreninde 14 nolu ucu boşta mı kalacak ?
Yardımcı olursanız sevinirim... şimdiden teşekkür ederim
Şuan devre 2 hamle yapıp duruyor. Sabit kalıyor. Lütfen yardım edin 🤗
Cool I like it I would buy it
A++ for effort and result and good video
the power u use is from the usb ?
Hi where you put yellows wire to arduino or other suply
MAN that's a lot of work!