Thanks for the plans man, my cuz is so lazy when I asked her to get me a list of materials and tools needed for the project, THAT SHE STATED SHE WANTED TO BUILD. She sent me three videos and this is the only one that provides the schematics.
I’m was about to make one for my channel but I’m only gonna use scrap wood old and scrap furniture to make mine, I also want to improv for anyone who doesn’t have coping or bedframes
"Alright I reckon that's it..." Bro... you just ripped the shit out of that ledge! You made your own skate spot, then instantly shut it down haha Awesome video 🔥🔥
this is bad ass Rick ! searched how to build one of these on YT and didn’t expect to see my man RICKY ICE showing me how it’s done ! thanks brotha ! 🤘🏼🛹
nah i think around 30 is good, you dont want it too high that its a hassle to skate, you could always raise it up on some bricks quite easily but never lower it :)
I recently built a grind box but the angle but the plain steel angle is too sharp and doesn’t allow me to grind properly, I’ve grinded it diferent times and still the same way, any suggestions ? Thanks in advance
Hey man, sick video. Was wondering how the stickers held up/ slide. We have just coping and straight Masonite for our top sheet, which slides much better than plywood but still sticky for certain tricks. Would you say the strikers are worth doing or so they rip up quickly and end up making a mess ? I just wanna slide yo 😭 grinds are perfect haha
Hey mate loving the content you've been bringing out. Just a question about the coping where did you get the angle iron from and how thick is it. Cheers bro
A fun experience I would recommend, are you gonna build one?
No
@@myguy6163 rude
Yeah during next 6 weeks of lockdown
@@penguinshooter2133 get in early so you can skate it!
Yesss!!🤗
I absolutely love this guy’s energy. He makes me want to learn the tricks he does
Great! Looking very solid. That blunt kickie out man!!
yeah so fun to make and skate :)
Agreed!
So cool to see you here cuckoo!
Awesome box and even better skating! Didn’t expect you to shred so hard! I’m going to use these same plans, so thanks for the quick and easy tutorial!
Bro you killed that box session. I’m about to try and build this!
lol at the music!
sick blunt kicky out dude damn. nice vid!
haha thanks it just felt right :D
I just rewatched your lakai fully flared part ! I’m 26 and I watched it my first time like ten years ago. U rock.
Did he mention the measurements of what he cut and What kind of wood it was? Or even what kind of angled iron he used
Thanks for the plans man, my cuz is so lazy when I asked her to get me a list of materials and tools needed for the project, THAT SHE STATED SHE WANTED TO BUILD. She sent me three videos and this is the only one that provides the schematics.
DUDEE THAT'S CREATIVE!!!!
Your videos really encourage me to start skateboarding, love your tricks btw!!! 🖤
God dang it I love ledges, I didn't expect a how to from you that was unexpected, I just searched "how to make a skate ledge". Sweeeeet. (F)
hey ricky can you maybe do low budget tutorials like cheapest quarter pipe, rail, stuff like that
yeah that could be a fun idea!
Do you know how much it costed in US dollars
I’m was about to make one for my channel but I’m only gonna use scrap wood old and scrap furniture to make mine, I also want to improv for anyone who doesn’t have coping or bedframes
Thanks for all the details to build it! Love that box i will wprk on it
Dude you DEMOLISHED that ledge holy shit what a bag of tricks to test it out!! This came out really great :0
Paint the coping for a better slide.
Also, add an old pair of trucks to one side at the bottom to wheel the box around easier.
"Alright I reckon that's it..."
Bro... you just ripped the shit out of that ledge! You made your own skate spot, then instantly shut it down haha
Awesome video 🔥🔥
Now add a little ramp to one of the sides! That would make it perfect
I definitely want to give this a try, may be a project for this winter
Sick! When i get older i will start building my own ledges and ramps!
Thank you for your work and sharing. I think it played out very nice.
And you skate pretty good
Respect ;)
Damn fool. You threw down on that shit!! Nice job 👍
What screws did you use
About to start my quarantine box!! Thanks my guy ✊🏻
Been waiting for something like this, thanks for the video 🔥
Nice build and very impressive riding! Gonna build one with my son!
Have fun! Send me a pic on instagram
I'd love a 'My War' style video about the crooked grind impossible on the ski jump rail.
@rickyglaser
yeah ive been meaning to make that for awhile!
Awesome video and some solid ledge tricks !!
Awesome video Ricky have a great day 😊😊
thanks you too!
Absolutely filthy. Nicely done dude.
this is bad ass Rick !
searched how to build one of these on YT and didn’t expect to see my man RICKY ICE showing me how it’s done !
thanks brotha ! 🤘🏼🛹
Looks good man. Good job
Yeah stuck in same lock down situation was set on making one. Thanks for the inspiration. Are u still happy with 30cm height or wish it was bigger?
nah i think around 30 is good, you dont want it too high that its a hassle to skate, you could always raise it up on some bricks quite easily but never lower it :)
That help me a lot thanks man 😅
Love the music lol!
Nice touch with the stickers.
went stupid! Nice ledge nice bag of tricks
Nice bro...from Bangladesh
Great initiative
Masonry board is one of best types of “wood” (almost laminate) to build DIYs
Ricky glizzy
I recently built a grind box but the angle but the plain steel angle is too sharp and doesn’t allow me to grind properly, I’ve grinded it diferent times and still the same way, any suggestions ? Thanks in advance
I respect ur vids man, keep going
Very cool Ricky, hope you found a good home for it when you got the call to come over here.
I gave it to sheezy :)
@@rickyglaser cool cool.
well done bro
whoa! You destroyed that box like nothin! Amazing
@1:28 the power bricks🤣🤣🤣🤣
A guy who probably rides handrails says he's afraid of the danger of power tools. I love it.
Nice job man! May I ask what camera you film with?
That looks awesome!! Where did you get your coping?
Hey man, sick video. Was wondering how the stickers held up/ slide. We have just coping and straight Masonite for our top sheet, which slides much better than plywood but still sticky for certain tricks. Would you say the strikers are worth doing or so they rip up quickly and end up making a mess ? I just wanna slide yo 😭 grinds are perfect haha
one more subscriber 🇧🇷
What is the width and the height of your box?
Bro I figured out that you are not just a skater but your a builder
f
Hey mate loving the content you've been bringing out. Just a question about the coping where did you get the angle iron from and how thick is it. Cheers bro
Goated
Thanks for responding to my comment on TikTok 😁
yo ricky, what was the exact material did u use? i live in SA and I'm wondering if I could get the exact same material from bunnos. cheers
I´m gonna build this. But I really want it to fit in my car without folding the front seat. Does it work as well if I only make it 180cm long?
Maybe go to a skatepark with some chalk and make an outline on a similar ledge to get an idea how it will skate, good luck
Did you counter sink to make the screws in the coping flush???
Yes actually thx this helped a lot
Where can you probably find the wood for free?
How it holding up after a year dude?
i moved away and gave it to a friend, i think sadly they didnt love it like i did haha
Add some roller wheels for easy pikup and go.
Very nice👊
Did it held up good ?
@rickyglaser which material is the coping? I am ready to order my wood but dont now which coping to use? Can smdy help meß
Inspect the 2x4s before you buy them next time, those things are beat
Nice
Yea mate
perffect !
U should to a nose slide to Manuel kickflip out
YOOOOO you aren't wearing tan shorts!
hahah yeah :D
ricky kinda looks like Layne Staley
I built a mini ramp once with my dad
awesome!
hey do u mind sending the full material list ?
is the top sheet MDF? is it super heavy?
or I could keep watching the vid and eventually bet my answer :)
i think so, yeah it is a bit, ur for sure better off with plywood but this works decently well too
💯
Bruh I’m legit following this video rn it’s pros not gonna be as good but meh
awesome! send me a pic on IG when u finish it!
Try make it a bit more smooth
What suburb u in?
Redic grind skilz
Yewwwww
Hi
winner :)
Muito foda mano, admiro seu trabalho e sua habilidade!
Built, slaughtered.
He’s wearing pants and not shorts I cant
I'm from Brazil and I'm going to do the same
F
My favorite part is that he always wears shorts lol
Pls pin this
;)
Hey Ricky how many likes do I got to get on this comment to get a free Ricky glaser deck🙏
F
F
F
F
F
F