Hi Derek, love the vid, and thanks! One question, can the Flipper Zero sniff a T5577 reader and obtain access codes? (without having an original real access fob)
Another keeper. I’m sure it’s already a ton of work to produce what you’ve done already and I appreciate it. But if you found the time to include references to further reading along with your vids, it would be very welcome.
Thanks for the feedback. I’ll try to the update my wiki with RFID content. For this video it was mostly from the ATA5577 spec. ww1.microchip.com/downloads/en/DeviceDoc/ATA5577C-Read-Write-LF-RFID-IDIC-100-to-150-kHz-Data-Sheet-DS70005357B.pdf For the previous video, I forget the resources I used, but blog.flipper.net/rfid/ is a really good read that I found after I made it. 🤣
Thanks again for the feedback. I released another video today about creating your own creds. I'll try to release the spreadsheet when I'm back from vacation. czcams.com/video/PLMGmRxhBts/video.html Hopefully in April, I will start updating the wiki BEFORE the content in the videos. :)
It seems RogueMaster firmware removed the programming feature during some code refactor, but is looking into how to add it back to the firmware. You can either downgrade to firmware from early Feb, or wait until a new solution exists to allow you to edit the T5577 blocks. For example, you can `git checkout fda9dcc3f67e3ad1279826cfa6a29863c0cc2afc` and build that version. For more help, feel free to ask in my Discord server - discord.com/invite/NsjCvqwPAd
Hi! I was wondering if you could answer this for me: Can one use the flipper zero to potentially recover and change a forgotten password for a samsung tablet ? I forgot mine, and I can not fanthom why I would change the password of my tablet, and I must have done it at one point because I no longer have access to it. I know I could factory reset, but part of my thesis research is on that tablet, and I don't want to lose that data (not to mention all the hard work poured into that research 🥲)
I think depending on how old is the tablet and if it has or not blocking itself with wrong attempts, if it does not blocking you can try to brute force the pin using the flipper as keyboard
Amazon sells those cloners for cheap, like $15USD. Join my Discord for giveaways and conversation (discord.com/invite/NsjCvqwPAd). My previous giveaway for a FlipBoard (plus I threw in dual rewritable RFID/NFC card & CC1101) only had 25 entries, so your odds of winning are really good! Giveaways are about every two weeks. In next week's video, will figure out those user data blocks for both an H10301 and a EM4100.
I want to do some ethical hacking related to cars, such as their doors etc. or anything tangible to automotive. Could you please suggest any ideas to try? And if possible some source where I can learn more about it?
I have a Chinese cloner that sets a password that I have no clue what it is, sadly that password feature from cfw doesn't have it so I cant remove it to rewrite the t5577
github.com/RfidResearchGroup/proxmark3/blob/master/doc/cloner_notes.md# lists some common passwords for cloners, but I think CFW already attempts all of those?
@@MrDerekJamison checking the repo for the cfw I am using on my flipper (github.com/Next-Flip/Momentum-Firmware/blob/dev/applications/main/lfrfid/lfrfid.c) it seems it doesn't try 2 of them, E0150A48 and 2D782308 but sadly its none of those either :/ the cloner in question is a xixei x7, cant find anything about it online.
@@shy_doge no idea. Maybe join iceman discord server and ask in rfid-cloners channel. Seems a few people have that cloner, hopefully at least one has a PM3 and figured out the password? discord.gg/PstRZRkq
Got the Latest Rouge Master Firmware in my Flipper zero but why its not showing the T5577 wipe option ? Please let me know how can I get the wipe option....thanks in advance
Sadly, RogueMaster no longer has Wipe or even writing a block. My video last week shows how you can write code to do it - czcams.com/video/nSCIOz2bVR0/video.html. Next week's video will be about how to write code to wipe a T5577 to act just like a blank InstaFob from Home Depot (and when it writes the data, it will confirm it worked.) Right now, the simplest you can do is Add Manually, choose "Generic HIDExt", Save, then Write. Blocks 1-6 will basically be filled with 5s, but you won't get any validation it worked. Feel free to ask on my Discord server if you need additional help -- discord.com/invite/NsjCvqwPAd
@@MrDerekJamisoncan you please let me which version of rouge master had that option to wipe T5577? If you could give me the firmware link will be appreciated....thanks
@@adilbd github.com/RogueMaster/flipperzero-firmware-wPlugins/releases/tag/RM0208-2318-0.97.2-f563329 It writes 0x00148040 to config block. And writes 0x0 to user data blocks 1-7. If you join my Discord server I can share you a TGZ file (it's about 5MB). discord.com/invite/NsjCvqwPAd
For anyone else looking for the file, you can join RogueMaster's Discord server and he can provide something that should work. His server is at discord.gg/gF2bBUzAFe
Hi Derek, love the vid, and thanks!
One question, can the Flipper Zero sniff a T5577 reader and obtain access codes? (without having an original real access fob)
Another keeper. I’m sure it’s already a ton of work to produce what you’ve done already and I appreciate it. But if you found the time to include references to further reading along with your vids, it would be very welcome.
Thanks for the feedback. I’ll try to the update my wiki with RFID content. For this video it was mostly from the ATA5577 spec.
ww1.microchip.com/downloads/en/DeviceDoc/ATA5577C-Read-Write-LF-RFID-IDIC-100-to-150-kHz-Data-Sheet-DS70005357B.pdf
For the previous video, I forget the resources I used, but blog.flipper.net/rfid/ is a really good read that I found after I made it. 🤣
Thank you! Much appreciated!
Thanks again for the feedback. I released another video today about creating your own creds. I'll try to release the spreadsheet when I'm back from vacation. czcams.com/video/PLMGmRxhBts/video.html
Hopefully in April, I will start updating the wiki BEFORE the content in the videos. :)
It seems RogueMaster firmware removed the programming feature during some code refactor, but is looking into how to add it back to the firmware. You can either downgrade to firmware from early Feb, or wait until a new solution exists to allow you to edit the T5577 blocks. For example, you can `git checkout fda9dcc3f67e3ad1279826cfa6a29863c0cc2afc` and build that version. For more help, feel free to ask in my Discord server - discord.com/invite/NsjCvqwPAd
Hi! I was wondering if you could answer this for me: Can one use the flipper zero to potentially recover and change a forgotten password for a samsung tablet ? I forgot mine, and I can not fanthom why I would change the password of my tablet, and I must have done it at one point because I no longer have access to it. I know I could factory reset, but part of my thesis research is on that tablet, and I don't want to lose that data (not to mention all the hard work poured into that research 🥲)
I think depending on how old is the tablet and if it has or not blocking itself with wrong attempts, if it does not blocking you can try to brute force the pin using the flipper as keyboard
ty
Amazon sells those cloners for cheap, like $15USD. Join my Discord for giveaways and conversation (discord.com/invite/NsjCvqwPAd). My previous giveaway for a FlipBoard (plus I threw in dual rewritable RFID/NFC card & CC1101) only had 25 entries, so your odds of winning are really good! Giveaways are about every two weeks.
In next week's video, will figure out those user data blocks for both an H10301 and a EM4100.
Hi Derek,
Thank you so much for the video. I have recently started learning about flipper zero and your videos have really helped me.
I want to do some ethical hacking related to cars, such as their doors etc. or anything tangible to automotive. Could you please suggest any ideas to try? And if possible some source where I can learn more about it?
I have a Chinese cloner that sets a password that I have no clue what it is, sadly that password feature from cfw doesn't have it so I cant remove it to rewrite the t5577
github.com/RfidResearchGroup/proxmark3/blob/master/doc/cloner_notes.md# lists some common passwords for cloners, but I think CFW already attempts all of those?
@@MrDerekJamison checking the repo for the cfw I am using on my flipper (github.com/Next-Flip/Momentum-Firmware/blob/dev/applications/main/lfrfid/lfrfid.c) it seems it doesn't try 2 of them, E0150A48 and 2D782308 but sadly its none of those either :/
the cloner in question is a xixei x7, cant find anything about it online.
@@shy_doge no idea. Maybe join iceman discord server and ask in rfid-cloners channel. Seems a few people have that cloner, hopefully at least one has a PM3 and figured out the password? discord.gg/PstRZRkq
@@MrDerekJamison alright I will check it later, thank you!
Got the Latest Rouge Master Firmware in my Flipper zero but why its not showing the T5577 wipe option ? Please let me know how can I get the wipe option....thanks in advance
Sadly, RogueMaster no longer has Wipe or even writing a block. My video last week shows how you can write code to do it - czcams.com/video/nSCIOz2bVR0/video.html. Next week's video will be about how to write code to wipe a T5577 to act just like a blank InstaFob from Home Depot (and when it writes the data, it will confirm it worked.)
Right now, the simplest you can do is Add Manually, choose "Generic HIDExt", Save, then Write. Blocks 1-6 will basically be filled with 5s, but you won't get any validation it worked. Feel free to ask on my Discord server if you need additional help -- discord.com/invite/NsjCvqwPAd
@@MrDerekJamisoncan you please let me which version of rouge master had that option to wipe T5577? If you could give me the firmware link will be appreciated....thanks
@@adilbd github.com/RogueMaster/flipperzero-firmware-wPlugins/releases/tag/RM0208-2318-0.97.2-f563329
It writes 0x00148040 to config block. And writes 0x0 to user data blocks 1-7.
If you join my Discord server I can share you a TGZ file (it's about 5MB). discord.com/invite/NsjCvqwPAd
@@MrDerekJamison Hi I already Joined there. My Name is ADIL there.Please let me know how can I get the file there because I am new there.
For anyone else looking for the file, you can join RogueMaster's Discord server and he can provide something that should work. His server is at discord.gg/gF2bBUzAFe