HOW TO SET DROOP FOR YOUR BUGGY | PRO TIPS BY DAVID RONNEFALK
Vložit
- čas přidán 7. 09. 2024
- This tip goes over all your offroad vehicles!!!
HB Racing | Team Orion | Jconcepts | Highest | Absolute Hobbyz | Arrowmax | XTR | Neobuggy.net |
Homepage: www.davidronnef...
Facebook: / davidronnefalk
Instagram: / davidronnefalk
Twitter: / davidronnefalk
Edited by: Hugo Nilsson
Music by: / lakeyinspired
U are the MAN. David !!!
Awesome I have been doing this for awhile and it works great on my car 👍
Nice! 👍
I think this video is great for 1/8 scale, Still not sure proper way to set droop on the D216 or D418. No droop screws to make adjustment! Thanks David for your knowledge!
Veri good metod but Before checking the droop you must have THE SAME IDENTICAL CAMBER ON BOTH WHEELS IN THE SAME AXLES
Yes, this is correct👍
David, I really appreciate your videos. Has made servicing my HB car very easy. I don't follow how you come up with the droop though. I have the 30mm blocks and droop gauge. I get confused on how many mm are in the axle ?
JPou8
The color grade is so lit tho
not sure if you guys cares but if you're stoned like me atm you can stream all the latest series on Instaflixxer. Been streaming with my brother for the last weeks :)
@Evan Edwin yea, I have been using Instaflixxer for since december myself =)
The front of my buggy is angled so it sits way higher than the rear, the rear has more droop than the front; how can I set the front properly?
Does this tool measure ride height and droop screws?
Is this the standard setting for all 1/8 buggies?
No. But most setup sheets will have the shock length measurement and not this method. I would adjust according to conditions and how your buggy is handling.
why is the droop screw upside down?
It pushes down onto the chassis. You will see droop screws with button heads or simple grub/set screws