Use Epoxy To Resurface Countertops To Make A Faux Stone/Marble Look | DIY Countertop Remodel Ideas
VloĆŸit
- Äas pĆidĂĄn 28. 02. 2020
- In this video we show you a step by step process on how to create a faux stone look. You can coat right over your existing surfaces giving them a beautiful new look! Coat over formica, granite, concrete, laminate & more! All of our kits are DIY friendly, you can apply this to your outdated countertops in your own home! Our epoxy is American made & no torching required!
This countertop was done using our Leggari Stone Kit #2 incorporating the Dirty Pour technique. The colors used were adamantium, dark mercury &midnight pearl & white spray paint (Rustoleum).
If you're interested in purchasing this Leggari Stone (dirty pour) countertop kit, check out this link: leggari.com/product/leggari-s...
The process! đđ
THE SUBSTRATE
Prepping the surface of the countertops is easy. Most surfaces just need sanded (80-100 Grit) then wiped clean. Granite and Marble will need the sealer removed. Tile will need the grout lines filled with Bondo and sanded smooth before applying our Countertop Kits.
EPOXY PRIMER COAT
Priming the Countertops is simple and fast. Mix your pre-measured primer then dip and roll the pigmented primer across the surface until the countertop surface is completely covered. Wait 1 hr. (or until tacky and not coming off to the touch) and start applying the Base Coat.
METALLIC EPOXY COAT
There are so many different applications for our metallic epoxy coat. In this video we show you the dirty pour technique. When you place your order you'll receive step by step tutorial videos that will show you how to apply this part depending on the look you're going for!
HIGH WEAR TOP COAT
We offer 2 different Performance Engineered Top Coats. Glaze Coat is our High Build Top Coat that lays out like glass and adds depth to the Countertop. The Urethane Top Coat comes with the option to have a High Gloss or Matte finish. It needs to be rolled out super thin and leaves a minor texture on the countertop. You apply it within 24 hrs. of installing your Countertop Kit
Leggari Countertop Kits were designed to transform your countertop, tabletop, or desktop into something new and beautiful by coating your existing countertop or pre-built wood countertop. They can be installed in 3 to 5 hrs. including the prep work, and will last for decades. If you can paint your countertops, youâre more than qualified to install a Leggari Countertop Kit. Our Countertop system is leading the resin industry for thickness, durability, and scratch resistance with our High Wear Top Coats.
Our Countertop Epoxy is specifically designed for counters and can be applied to any hard surface. Itâs 100% Pure Solids using the finest raw materials that include proprietary additives for working time, thickness, flow and marbleization that are vital when achieving our Dynamic Effects. Our Countertop Epoxy is also a decorative, durable and chemically resistant coating, available with a High Gloss or Matte finish.
#leggari #leggaristone #leggariproducts - Jak na to + styl
I was doing homework and somehow ended up here and now I am mesmerized. This shit is so damn cool!
I absolutely love this video. You made it so easy to understand. I going to do my bathroom!!! Thank you for this tutorial.
I've said this every time but..... this technique is awesome! Looks amazing!
Thanks for the wonderful comment and for watching the video
Very similar to doing an acrylic pour project but on a much larger scale! Very creative, so I'd probably love to try this.
Omg how have I never seen this being done before,they are absolutely stunning looking at the end,hats off to you guys
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
This was so relaxing!đđ turned out soooo beautiful đđđŒđđŒđđŒđđŒ
The first result that Iâve liked on a resin pour!
Thanks Hannah, glad you enjoyed it.
online.flippingbook.com/view/364043
Beautiful job, thanks for the video. I will try this on my next project.
Amazing! Now please come to VA and do my counters... please!!
"Alright, now we have the spray paint done....and I'm semi-high"đ€Ł
I've had a fascination with epoxy for a while and this is the reason why. The possibilities are endless of what can be done with it. And even for me personally I would choose countertops like this over ANY natural stones.
Also I can see this ismore than just work for you guys. This is art
This is ART! so refreshing to watch!!
Very carefully measure 64 oz into your measuring cups, and then - mix them all together in whatever way feels right to you! Love it. Going to do this to my RV!
excellent video, a serious person and who really know, congratulations
I really like the look of the high-gloss it looks so beautiful and brand new and it will probably stay looking new for years absolutely love it I think I might have to grow some courage and do my counters!đ„°
me encantĂł, ojalĂĄ y algĂșn dĂa realicĂ©is estos trabajos en España
Saludos desde el Peru, es un excelente video muy didactico y muy profesional el trabajo. felicitaciones es un perfecto acabado. dare mi like espero ver mas de estos interesantes exposiciones y seguir en su canal. muchas gracias.
So beautiful I am excited to do this in my new house.
Wow.. not only nice . You explain it so well ..
I think these guys make it look way easier than it is. But the finished results looks fantastic.
Definitely thinking about doing my countertops now
You can actually order or price out a custom kit for that exact square footage through the Counters section of our website at www.leggari.com. Simply click on Counters >>>>then click on the epoxy button, then the button buy today, then follow the steps.
This is ridiculous đđ Iâm jealous of whom ever got this design đ
That's art right there. Super nice!
That looks really beautiful!!!
This beautiful. I've got to try it đ
I absolutely love this and i want it now!
Beautiful work!!
My kit came today. This looks like fun. A week from now it should be done if everything else arrives on time
How did it go?
Looks amazing, gray job!
Thanks Tom for the comment and for watching the video
I want counter tops like the design on the background! đ
You can pick one of our kits at leggari.com or pick your own colors!
It's amazing am gonna try it
excelente vĂdeo, saludos desde CuliacĂĄn, Mexico
Vous ĂȘtes le meilleur dans votre mĂ©tier bravo continuez comme ça (fr)
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
uma verdadeira aula profissional acabamento perfeito grato
Wow!!! you are a very professionel bravo!!!!
Amazing video well done guys , really well explained and beautiful job.
Thank you! We appreciate that!
That epoxy must have on heck of a long working time. How long? Can pours be layered after the first layer has set/cured?
He looks like my brother Grant who passed away at 35 years old. Such a trip how much he does. I enjoy watching just to remember him! He would love these kind of counter tops Iâve learned how to do them and Iâve gotten really good at it !!
That is awesome, glad they help!
Wish I can do it, it looks easy watching
This is awesome looking
Spectacular!
looks sick
Excellent
Gorgeous
Thank you for watching the video!
I love your job!!
Awesome! Awesome!
AMAZING!!!!!
Yep...I think this is it for međâ€
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Boa noite em primeiro lugar quero parabenizar pelo trabalho muito lindo mesmo
Como posso fazer pedido de material epĂłxi e dos baldes de medidas
Te felicito
These look beautiful, and I would like to do this but I have an old counter with the back on it, what can be done with a counter like that? thanks
Great video! What would you do if you couldn't remove the sink? Taping over it is the obvious option but trying to do that whilst keeping the thickness of the epoxy and ensuring it doesn't start coming over the top can seem challenging. Any ideas?
Damn...of all the commercials, this one took my FULL attention LOL!!
Wooow! This is awesome!!! How do you clean the epoxy that drips onto the white cupboards?
Beautiful
I wish I can it
Will this work on an outdoor countertop that receives sunlight?
When u have no intentions of remodeling ur kitchen, but are bored & there is something relaxing about watching this. đ
... and now I may be thinking of remodeling my kitchen.
Those are beautiful. No backsplash though in your tutorial. I have a 6 inch granite backsplash as well. I assume I would have to remove them to epoxy them to match the counters?
This guys are so great
Full of tips and tricks
Thanks
Bravo
Great video. Is it possible to put this over granite tile?
This was great, thanks!
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Very good boys thanks for simplifying it for me .result is the dogs bollox .
I have to learn how to do this. I have to get this kit.
Beautiful work bro
Thank you! Much appreciated bro.
Parabéns muito bom trabalho exelente aqui no Brasil jå estå sendo feito esse trabalho um forte abraço
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Very nice work
Vc e dez meu amigo amo seus trabalhos muito belĂssimos
Gracias Amigo
Amazing guys love your videos,your the reason I have just started my company name is Epoxymonkeys thanks dude for all the tips.i love your videos watched every one like too.
THANK YOU FOR THE DREAM
Stay tuned there are more videos to come. Good luck with your company.
@@LeggariProducts could I use this on a floor?
Ráș„t Äáșčp. TĂŽi ráș„t thĂch!!!!!
Muy bueno amigo exelente
Hi Jorge, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
The best of the best,....
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Nice job I'll be ordering soon after I check out the website hopefully its affordable
Hi, take a look at our online brochure. Thanks
online.flippingbook.com/view/364043
Y'all must use these counters over and over for demos because I watched a video last night and it was the same area! Beautiful work, as always. I have a question, though... What so you do when the counter has a riser at the back?
Well done! Is it possible to get the same look but not glossy?
So we going to just glaze over him saying "Im Semi High"đđđđđđ he stayed so professional
I'm high as shit. I didn't get to hear him say that smh
Never mind. Heard him say it now.
@27:38 .... repeat until it sounds Japanese
đ€Łđ€Łđ€Łđ€Łđ€Łđ€Ł
Yes marijuana is legal everywhere but your state !
Love this. Question, can you put this on any surface? Can this be done over bare plywood? Working on an Island and do not have the complete idea for the top yet. I would appreciate any suggestions. This is so beautiful.
I would sand it smooth and prep any imperfections with all purpose bondo, especially any knots. Then sand again for a smooth finish.
Awesome technique and products. I am looking for a marble type finish and I have a 20yr old 8" square ceramic tile countertop with 1/8" grout. Besides the bondo for the grout, would I need to rough the tile surface before applying the primer? Thank you in advance!
Love the videos and recently ordered this kit. Why did you do a base coat with this video? I noticed in other videos you don't do the base coat.
Love the way he explained. He would be such a cool art professor!
Yes, thanks you!
Like
Blimey, I could watch this in a loop for the next ten years solid! Pity about the annoying ads from twerps telling me how to become a millionaire in weeks, every 5 minutes!
Wow, this is unbelievably beautiful! Is it scratch resistant?
I have a part of counter that looks like the epoxy was heated to much. Can I sand and just fix that area or do i need to repour
BEAUTIFUL JOB!
Did you add backsplash to the walls, or did you leave them bare?
Love it !! Zz
That is Beautiful!!đđ
Thank you
Will this work over poured concreate? All my countertops are reinforced concreate. Thank You
thes is to good..material. good job
Thanks Ajmal for the comment and for watching the video
how long this will endure in four seasons, very very amazing creativity & designs, how much budget it will bear me???
Our products are actually certified for industrial grade coatings made for high traffic commercial settings. So theoretically in a residential, or even commercial setting it will last for decades as long as the urethane top coat is re-applied when needed to protect the decorative coating. This is NOT a cheap epoxy paint that you will commonly find at box stores like Home Depot or sherwin Williams. It is a thick 100% solids epoxy coating formulated for high traffic areas and heavy machinery.
can your products be purchased in Europe as well? Slovenia maybe? :) great video, it explains a lot!
Tyler, I hear you talk about denatured alcohol and 91% isopropyl...can we use them interchangeably or is it specific?
For instance you spray 91% after you do your effects but you talked about denatured to tack up the primer if it is cured?
Woooooow I need lern it
Bravoooo đđđđ
Thanks for the thumbs up Nokhsha
Good day awesome Team,
Was wondering if pinewood or other wood could be used for the countertop instead of granite and still end up with same result? Fel from Nigeriaâ„ïž
look s great
Thanks Clare for the comment and for watching the video
I â€ïž it
Thank you!
Could I do this on a tiled countertops?
Hope this is as easy as you guys make it look. Weâre going to be doing this exact pour and color. But I do have a question... do you have a video that shows ways of doing a bar top that overhangs the counter? Donât want it dripping onto the counter ruining the pattern and canât think of any method to making a âcatchâ underneath but off the counter...
Tape a cardboard drip tray under the over reach.
Two things: 1) I entered the black hole of CZcams and found this video...I am not even looking to epoxy anything but it was so informative and cool...I watched the whole thing with no regrets. 2) IT'S ALL ABOUT THE WHITE ;) Great video.
Hola desde España como puedo comprar tus productos .Gracias un buen trabajo Impresionante
What is in the bottle spray? Water , or resin? And how much time do you have to work with the resin before it dries out
great job, I wonder if I could epoxy my table while working over hard tile flooring. Will the epoxied wood stick to the hard tiled floor? thanks
1) can this be used on Solid Surface, IE Corian? 2) how would you pour on a counter where the sink can not be removed? IE A glued to the underside corian sink?