As a mobile van based truck engineer myself I can help noticing that it never seems to be raining or windy and the birds are always singing in the background. Every time I set my outside work station up it immediately starts to piss down.
I’ve done clutches when I was at college learning mechanics at 16 years old (I’m not in the mechanic trade now) and two of us used to struggle lifting them into position, how he does it alone and on his back is Just amazing haha..
I finished swapping my clutch and flywheel today. The hardest part for me was to put the transmission back on. Without your video I wouldnt have had the confidence to do it myself! Thank you Kevin Albert Williams Greetings Michael from Germany
For the record thats a Bmw Getrag box and its a really heavy bugger,,, how he got that in alone on his back using the old knees is bloody impressive,,,,and no cursing too,,,,a very skilful and disciplined lad,,,,
Hard working man, I wish you every success. That was a good job, efficiently done. Wrestling the box in and out on your own must have been demanding enough.
The slave cylinder went on our TD4 Freelander. When I realised how difficult it would be to get in there are asked the mechanic to put a new Valeo solid flywheel and clutch kit plus a Tazu metal slave cylinder. Normally I work on my own cars but this looked horrible. I'm impressed that you do this on axle stands as my mechanic has a twin post lift in a nice warm dry workshop.
Just done one on mine exact colour aswell but the 3 door one! 2003 s model I put a solid flywheel in a DMR brand one and I must say I’m impressed brilliant quality
Big respect! without a crane this is veri difficult to do,and i also did it once and i don't think it would occur to me anymore. Once again,great respect for perseverance and greetings from Novi Sad,Serbia.
Thanks for posting such an informative and clear video, I am just about to 'try' to replace the clutch (free of any labour charge) on an '03 Freelander owned by a lady I know who simply can't afford to have it done professionally. I haven't done the job on a car with a transverse engine before so hope that your excellent step by step video will be the difference between succes and failure. So here we go :)
Ulisses Cruz de São Paulo o Kevin Wilians é realmente um rapaz esforçado que vale um valor bem acima da média e que poucas pessoas fazem este esforço no qual é difícil e sou seu fã e também gosto de carros e mecânica e estou desmontando o meu veículo . Parabéns pelo seu trabalho e é mais barato que uma oficina comum . Nota 19.
Hola cómo estás. Soy Fabio desde España . Gracias por tu trabajo y paciencia. Te puedes imaginar que estás ayudando personas de todo el mu mundo con tu vídeo? Un saludo y thank you again
good job. although today I have seen him suffer with that heavy gearbox. Dmf also in poor condition means more work but with good tools it has been little trouble. thanks for sharing.
Daniel Robinson thanks a lot as always for the continued input on the channel ... It was a heavy box ... and the cold day really added to it all. But it ended nicely.
Fair play to you Kevin-Albert. I did one of these on the drive in November. Admittedly I have back problems, but I used an engine crane, it still took me a week and I wanted to put a match to it after about 2 hours...
@@WMCS ha ha.. not sure how much I saved, but I did get a nice new compressor, impact gun, insane amount torque wrench.... Just can't get over you bench pressing the IRD, makes me laugh thinking about it...
Super! Thanks for sharing this. Gives me the confidence to tackle the job myself. My haynes mannual is a bit vague on how to remove the gearchange linkage which you demonstrate in this video - from Kenya
Just used this video to change my throwout bearing, great video 👍 but for some reason i cant airout the system, I have no leaks but its like it wont make Any pressure in the clutch pedal.
Massive respect for what you do.. And always been interested in why some labour costs are so high... But in this instance surely the cost of parts and labour far outweigh the worth of a 51 plate Freelander... Completely put me off ever buying one. Awesome video btw.
Kevin I was feeling for you I have a Jaguar 2.7xf which took me 2 days although I don't normally do large repairs I'll never have a Jag again Landrover engine
كل الفيديوهات ممتعة وفيها خبرة ودراية مسابقة بالمهمة، تجهيز القطع وتجهيز السيارة للتنقل بها مع كل المعدات اللزيمة تكون المهمة جد مباسطة و واضحة للجميع، سوف اقوم بنشر هده الفديوهات في الوقت المناسب؟ وسوف تجلب الكثير من المعجبين وخاصة لمن يهمهم الأمر، شكرا جزيلا على كل المعلومات المفيدة والتي فيها الكثير من الفوائد .. عبدالرحمان من الجزائر
Have you ever had any issues with that clutch align tool? really must invest in one, usually I use a 1/2 drive long reach socket to aline much clutches usually there is always one in my set that will fit the clutch spline hole and the hole on the crank perfectly, interesting that the tool your using just centers the disc on the pressure plate.
Hy mate i have a question if are don’t mind I have a freelander 2004 diesel and I have a problem drive ok when engine is cold but when engine is hot loses power I need to press the gas pedal maximum to Take speed and feels very slow car any idea what could be wrong
This is awesome ! I have the same issue with the slave cylinder and found oil on top of the clutch, is there a way do get off the gearbox without descending the motor ? I live in south of France maybe you know a good professional close to Montpellier or people who can help me ? Cheers
Great Video. I replaced mine on 2004 td4 last year, replaced everything with Luk including the master cylinder. This week my pedal felt soft and today stuck on the floor and fluid on my drive, looks like Concentric slave has give out 😕 looks like i will be doing it again in the next week or two. Picked up some tips from this vid so will hopefully save some time, how long did this job take you 👍👍
Abis Ismael thanks for your input. Unfortunately I’m not a torque wrench, tape measure and pencil behind the ear mechanic ... but whoever does a repair and feels the need to use torque wrench I highly recommend it ....😁
Hi Mike. A big thankyou for the membership. You can email me or WhatsApp I can walk you through any point you’re not sure about. 07376369067 Send me a photo of the underside where you’re not sure and we can pick it up from there.
Great job! This one seemed to be longer than usual, but maybe it wasn't. Not so many bolts, as I could see, but it was a very big gearbox, and sure very heavy as you used your legs to hold the weight. Was the DMF damaged? New bolts were included in the new DMF or you had to use the old ones? No need to torque them? By the way, I liked more the old musical intro. It was very suitable together with the retro-styled picture, as if Super Spanner had arrived! 😄 Thanks for the video!
Oscar Montero this job was the same as one of the previous... Only difference is one was made in the spring of last year nice and warm beautiful day ... this one has been filmed in 1• Celsius... notice how white the metal is from the cold ... fingers was a bit numb throughout the repair ... Good observation about the use of legs as at that point I’d pretty much lost sensation in all the fingers ... so could only feel the palm of my hand ... But with constant movement the body warms up and the hand is back to normal after about 2 hours .... New bolts came with the DMF, I don’t particularly have much use for a torque wrench purely because I know what I’m doing and can gauge how tight to go ... But for anyone that is unsure a torque wrench is highly recommended... That was quite a heavy box ... the trick is to carry on until it slots in otherwise time and strength are easily sapped .... Thanks a lot for your input and review of the channel.
I never saw anyone like Kevin change the drive and the luggage of all the cars alone. Of course you have a lot of money the day you change 3 clutch locks and you make good money.😁😁
seyed rozbeh siros I think i do it more because I enjoy the adrenaline of the job. Believe it or not it’s a real buzz for me tackling these clutches on my own ... especially if the weather is quite stormy ... really adds to the scenery. Thanks always for your positive review
@@WMCS I love your work and by looking at your movies I have repaired my own disk and page 206 and thank you for making these videos available to people💝💝Sorry what country are you from I am from Iran
seyed rozbeh siros appreciate you sharing your experience on the channel forum. Glad to hear the video came through ok for you. We are based in the UK..
Have you moved away from Luk clutch kits for a reason or just so happens that latest customers wanted AP or Valeo? Only ask as I thought Luk were top quality or has that changed? Cheers 👍
offbeatwarble i always replace like for likes. These use AP from factory. In my opinion I wouldn’t say LUK is the best. But the most known brand. AP clutch are more superior. And never use and LUK in any vauxhall as the CSC are made of plastic. SACHS are great solid brand as well
@@WMCS I really like your videos they r very informative , I'm a mobile mechanic and I fix cars by the side of the road as same as you do so if I know the time how long it take . it would help me greatly 👍
marin khan that’s great to hear from a fellow mobile mechanic .... I’ll definitely put in the link the hours. But feel free to message me if ever you require a repair time for any job. Where about’s are you based.
@@WMCS hi I'm based in tunbridge wells , kent . I've seen a lot of your high quality videos and to be honest with u , ur doing a very good job but a word of advice plz 🙂🙂 . when you replacing a gearbox please use engine Beam to lower and left up the gearbox the reason I'm saying that I've learned it the hard way , I have had few time that the gearbox drop on top of me 🤣🤣🤣 , and I'm pretty sure you had it as well 😀😉 . Keep the good work mate 👍👍👍👍
J.F I’ve done quite a bit of the newer ones. I have come across the a few gearbox issues with the end bearing collapsing ... does that sound about right.
Kevin, how come everything seems to go right for you!? everytime i do a job on my car i always run into a nut or bolt or something that stops me dead haha
I have been a mechanic for 40 years , if i have a job to do i look on yuotube to check something i might miss , good video
As a mobile van based truck engineer myself I can help noticing that it never seems to be raining or windy and the birds are always singing in the background.
Every time I set my outside work station up it immediately starts to piss down.
Paul Roberts 😆😂.... you seem to be the lucky ones then .... jokes aside it’s been pissing non stop and I know exactly what you mean
I’ve done clutches when I was at college learning mechanics at 16 years old (I’m not in the mechanic trade now) and two of us used to struggle lifting them into position, how he does it alone and on his back is Just amazing haha..
I finished swapping my clutch and flywheel today. The hardest part for me was to put the transmission back on. Without your video I wouldnt have had the confidence to do it myself!
Thank you Kevin Albert Williams
Greetings Michael from Germany
Greetings 🍻🍻🍻
For the record thats a Bmw Getrag box and its a really heavy bugger,,, how he got that in alone on his back using the old knees is bloody impressive,,,,and no cursing too,,,,a very skilful and disciplined lad,,,,
It was a heavy old girl that box ., you definitely know your stuff. .,,
✨🍻🍻🍻
Just done a freelander td4 clutch and it was made so much easier by watching your video. Many thanks for what you are doing.👍👍
I fix agri equipment for a living and i appreciate working out in all weather!! heavy work for one guy!! top job!!
I'm a heavy equipment and farm equipment mechanic
Hard working man, I wish you every success. That was a good job, efficiently done. Wrestling the box in and out on your own must have been demanding enough.
Amazing, just completed my clutch on the freelander, had my laptop in the garage and followed step by step. Top man
The slave cylinder went on our TD4 Freelander. When I realised how difficult it would be to get in there are asked the mechanic to put a new Valeo solid flywheel and clutch kit plus a Tazu metal slave cylinder. Normally I work on my own cars but this looked horrible. I'm impressed that you do this on axle stands as my mechanic has a twin post lift in a nice warm dry workshop.
Thanks for your video I did my Freelander clutch and flywheel after watching it.
you showed the hidden bolts and bits I might of otherwise missed
Just done one on mine exact colour aswell but the 3 door one! 2003 s model I put a solid flywheel in a DMR brand one and I must say I’m impressed brilliant quality
Big respect! without a crane this is veri difficult to do,and i also did it once and i don't think it would occur to me anymore. Once again,great respect for perseverance and greetings from Novi Sad,Serbia.
thank you 🍻🍻🍻.,, nice time hear from someone that’s actually done this before.
@@WMCS This is what awaits me, only a Mazda engine, a diesel.
The best mechanic in UK ! Good job man ! Have a nice day man !
Alexandru Budescu thanks a lot for your review. Much appreciated you have a great day as well
Thanks for posting such an informative and clear video, I am just about to 'try' to replace the clutch (free of any labour charge) on an '03 Freelander owned by a lady I know who simply can't afford to have it done professionally. I haven't done the job on a car with a transverse engine before so hope that your excellent step by step video will be the difference between succes and failure. So here we go :)
Ulisses Cruz de São Paulo o Kevin Wilians é realmente um rapaz esforçado que vale um valor bem acima da média e que poucas pessoas fazem este esforço no qual é difícil e sou seu fã e também gosto de carros e mecânica e estou desmontando o meu veículo . Parabéns pelo seu trabalho e é mais barato que uma oficina comum . Nota 19.
You make it look so easy with the help of the impact gun great skill and talent its a learning curve for anyone,
Freelander TD4 Owner
Hola cómo estás.
Soy Fabio desde España . Gracias por tu trabajo y paciencia. Te puedes imaginar que estás ayudando personas de todo el mu mundo con tu vídeo?
Un saludo y thank you again
good job. although today I have seen him suffer with that heavy gearbox. Dmf also in poor condition means more work but with good tools it has been little trouble. thanks for sharing.
What is the DMF and when in the video do we see it? Cheers.
carles Girona it was a heavy box.... this one wasn’t for the faint hearted.
great video as always sir everything about that job looked heavy well done 🔧👍
Daniel Robinson thanks a lot as always for the continued input on the channel ...
It was a heavy box ... and the cold day really added to it all. But it ended nicely.
Wow, you deserve a medal mate fantastic job!
Fair play to you Kevin-Albert. I did one of these on the drive in November. Admittedly I have back problems, but I used an engine crane, it still took me a week and I wanted to put a match to it after about 2 hours...
The main thing is you managed it. Bet it save you a good £900.,,
@@WMCS ha ha.. not sure how much I saved, but I did get a nice new compressor, impact gun, insane amount torque wrench.... Just can't get over you bench pressing the IRD, makes me laugh thinking about it...
Excellent job! I have to do mine soon and this is a fab' tutorial. Thank you K-A Williams.
Super! Thanks for sharing this. Gives me the confidence to tackle the job myself. My haynes mannual is a bit vague on how to remove the gearchange linkage which you demonstrate in this video - from Kenya
It’s fairly straight forward.., gearbox a bit heavy tho .. maybe an extra pair of hand .. bug hello to Kenya 🇰🇪...
Denis Muriithi no problem my friend ..,
✨✨
Thank you!
Well done ,I wish I had you as my mechanic, deserve to go far , best of luck.
Just used this video to change my throwout bearing, great video 👍 but for some reason i cant airout the system, I have no leaks but its like it wont make Any pressure in the clutch pedal.
good job friend. congratulatios. a lot of work to change clunch
This is an exceptional video, so much detail thanks.
would have been lost without this vid THANKS
Massive respect for what you do..
And always been interested in why some labour costs are so high... But in this instance surely the cost of parts and labour far outweigh the worth of a 51 plate Freelander... Completely put me off ever buying one.
Awesome video btw.
Great little trucks but a pain in the bum to do a clutch on!
The box a bit heavy too. But a nice laid out repair tho.
Kevin I was feeling for you I have a Jaguar 2.7xf which took me 2 days although I don't normally do large repairs I'll never have a Jag again Landrover engine
One word... Excellent
Multifunction KÁ Tech thanks for the support on the channel
That guys stamina is astonishing.
Just picking up some tips. Got one to do next week.
Jep god damn determination awesome job, If I had money i would buy you a lift and a space to save your back.
Thanks JJ ., I’m sure that day will come 🍻🍻🎄
Nice partisant parking work !!!
Lifting gearboxes like a f00king boss 😎 respect. I doubt you need to go to the gym when you work that hard!
Now that's what I call a mecanic god bless u bro
كل الفيديوهات ممتعة وفيها خبرة ودراية مسابقة بالمهمة، تجهيز القطع وتجهيز السيارة للتنقل بها مع كل المعدات اللزيمة تكون المهمة جد مباسطة و واضحة للجميع، سوف اقوم بنشر هده الفديوهات في الوقت المناسب؟ وسوف تجلب الكثير من المعجبين وخاصة لمن يهمهم الأمر، شكرا جزيلا على كل المعلومات المفيدة والتي فيها الكثير من الفوائد ..
عبدالرحمان من الجزائر
Hope that’s a positive message you’re sending out 😁
4k Subscribers 😁 Nice job man.
colintx800 thanks for your support as always.
Amazing pal your a treat to watch what been the worst clutch you have ever came across pal 🤔
Have you ever had any issues with that clutch align tool? really must invest in one, usually I use a 1/2 drive long reach socket to aline much clutches usually there is always one in my set that will fit the clutch spline hole and the hole on the crank perfectly, interesting that the tool your using just centers the disc on the pressure plate.
how did you bleed the clutch or do you just fill slave cylinder when box is off
JUST AMAZING
Simply impressive! Have you ever done a Toyota RAV4 4WD VVTI 150? I have a 2002 to be done and thinking about doing it myself...
What an eyeopener , wow well done young man, how long from start to finishi wonder.
About 4-5hrs
Bravo... kevin, complimenti!
Don’t know how you managed to juggle between working the fixing and working the video camera
@23:00 what does the lube/grease for the mounting bolts do?
My respect!
Hy mate i have a question if are don’t mind I have a freelander 2004 diesel and I have a problem drive ok when engine is cold but when engine is hot loses power I need to press the gas pedal maximum to
Take speed and feels very slow car any idea what could be wrong
God what a job, must have patients of the gods.
This is awesome ! I have the same issue with the slave cylinder and found oil on top of the clutch, is there a way do get off the gearbox without descending the motor ? I live in south of France maybe you know a good professional close to Montpellier or people who can help me ? Cheers
gracias compa. buena referencia
Ничего не понял.КПП вместе с раздаткой в сборе сняли?
What a beast of a job. Nice one dude.
125 SM it was a heavy box. But that cold morning was probably worst than the job itself 😁
Very tuff job brother. Great
Thanks for the review .., it’s not all that bad tho 🤩
I like your weight lifting hobby 😁
Mi G 😁😆 oh it’s great and I don’t have to wait in line to have a go on the bench press.
Hi Kevin,
Am in the middle of this job just took the gear box off today do I have to change the DM Flywheel ?
Robert definitely yes. Otherwise you’ll most likely get the dreaded DMF rattle soon after. Especially with the new pressure plate fitted on it.
Great Video. I replaced mine on 2004 td4 last year, replaced everything with Luk including the master cylinder. This week my pedal felt soft and today stuck on the floor and fluid on my drive, looks like Concentric slave has give out 😕 looks like i will be doing it again in the next week or two. Picked up some tips from this vid so will hopefully save some time, how long did this job take you 👍👍
Hi Tim..,, hope it all goes well for you .., one thing to watch out for as well is any air lock in the line will cause the CSC to fail prematurely
@@WMCS cheers mate, what will be the best way to bleed it through
I would like to fit in my freelander 1 front tow bar keen same help thanks
Another great job. The filming is fantastic, must take you hours to edit it down.
Takes ages. Sometimes two days ..lol.
The tireless Kevin is at work ! Good job and thanks but i noticed that you didn't tight the flywheel bolts with torque wrench mate !!!!!
Abis Ismael thanks for your input.
Unfortunately I’m not a torque wrench, tape measure and pencil behind the ear mechanic ... but whoever does a repair and feels the need to use torque wrench I highly recommend it ....😁
It states 15 duger dugers on the gun in the manual. I counted 15.1 so spot on.
Podrías indicarme dónde están ubicados los pre calentadores un saludo y gracias
great job and great video thanks
ghost meister thanks ... appreciate that
Hi Kevin, what price do you charge labour for this? and how much does clutch and flywheel cost? Also do you have to drain the coolant system? Thanks
Hi Kev.. im just doing my 1.8 petrol mk1 clutch by watching this vid but not sure which nuts to remove on prop shaft ? is it the 13mm facing front ?
Hi Mike.
A big thankyou for the membership.
You can email me or WhatsApp I can walk you through any point you’re not sure about.
07376369067
Send me a photo of the underside where you’re not sure and we can pick it up from there.
Impressive that one mate. Well done.
Garry Nutter thanks for that feedback. It was a fairly cold morning... but a great repair. Appreciate the support.
How much would this cost, I’m looking to have my clutch replaced at some point in the near future.
Roughly about £800...
@@WMCS 5hrs work at least. Well done. You should start to train some young blood up to take over, but help with the heavy lifting as they learn.
Great job! This one seemed to be longer than usual, but maybe it wasn't. Not so many bolts, as I could see, but it was a very big gearbox, and sure very heavy as you used your legs to hold the weight.
Was the DMF damaged? New bolts were included in the new DMF or you had to use the old ones? No need to torque them?
By the way, I liked more the old musical intro. It was very suitable together with the retro-styled picture, as if Super Spanner had arrived! 😄 Thanks for the video!
Oscar Montero this job was the same as one of the previous...
Only difference is one was made in the spring of last year nice and warm beautiful day ... this one has been filmed in 1• Celsius... notice how white the metal is from the cold ... fingers was a bit numb throughout the repair ...
Good observation about the use of legs as at that point I’d pretty much lost sensation in all the fingers ... so could only feel the palm of my hand ...
But with constant movement the body warms up and the hand is back to normal after about 2 hours ....
New bolts came with the DMF, I don’t particularly have much use for a torque wrench purely because I know what I’m doing and can gauge how tight to go ...
But for anyone that is unsure a torque wrench is highly recommended...
That was quite a heavy box ... the trick is to carry on until it slots in otherwise time and strength are easily sapped ....
Thanks a lot for your input and review of the channel.
@@WMCS Woah! 1 Celsius... Freezing cold! So, it was something different. Take care! Thanks again!
Nice work man.
Hello m’y friend thank you 👍😁
Hellooo🍻
Good job, man
I never saw anyone like Kevin change the drive and the luggage of all the cars alone. Of course you have a lot of money the day you change 3 clutch locks and you make good money.😁😁
seyed rozbeh siros I think i do it more because I enjoy the adrenaline of the job. Believe it or not it’s a real buzz for me tackling these clutches on my own ...
especially if the weather is quite stormy ... really adds to the scenery.
Thanks always for your positive review
@@WMCS I love your work and by looking at your movies I have repaired my own disk and page 206 and thank you for making these videos available to people💝💝Sorry what country are you from I am from Iran
seyed rozbeh siros appreciate you sharing your experience on the channel forum. Glad to hear the video came through ok for you. We are based in the UK..
why don't you use the flywheel for torque?
You should always use a torque wrench if unsure
*Why remove oil IRD ? old oil or ?*
Respect, looks a right bitch of a job on that (and on the floor too). Wouldn`t fancy doing that on a ramp.
Top job!
Me gustan tus vídeos, me gustaría que subiese alguno de alfa romeo 159 o147 mucha gracias por compartir
Have you moved away from Luk clutch kits for a reason or just so happens that latest customers wanted AP or Valeo? Only ask as I thought Luk were top quality or has that changed? Cheers 👍
offbeatwarble i always replace like for likes. These use AP from factory. In my opinion I wouldn’t say LUK is the best. But the most known brand. AP clutch are more superior. And never use and LUK in any vauxhall as the CSC are made of plastic. SACHS are great solid brand as well
Hai sir how to one man work ?
São Pau-land Rover ! Notável !
Hi what happened to the quickjack?
is this a tough one to do .garages wont touch mine .say its awkward
Send it my way. I’ll get it done for you.
Superb work and video
V4 ************ always great to hear from you... your support is always welcome
Profi 👍💪🤠
Great video...Many thanks for sharing...
Malcolm Young thanks for your review and taking time to visit the channel
I don't know how you can lift a gearbox like that on your own ?
I think it’s because I’ve been doing it for several years now. So I’m confident enough
Dear K.A.W if u could tell us how many hour is the labour for every job u do in the description please would be realy appreciated
marin khan thanks for your input on the forum. I think I can do that for the upcoming videos.
@@WMCS I really like your videos they r very informative , I'm a mobile mechanic and I fix cars by the side of the road as same as you do so if I know the time how long it take . it would help me greatly 👍
marin khan that’s great to hear from a fellow mobile mechanic .... I’ll definitely put in the link the hours. But feel free to message me if ever you require a repair time for any job. Where about’s are you based.
@@WMCS hi I'm based in tunbridge wells , kent . I've seen a lot of your high quality videos and to be honest with u , ur doing a very good job but a word of advice plz 🙂🙂 . when you replacing a gearbox please use engine Beam to lower and left up the gearbox the reason I'm saying that I've learned it the hard way , I have had few time that the gearbox drop on top of me 🤣🤣🤣 , and I'm pretty sure you had it as well 😀😉 . Keep the good work mate 👍👍👍👍
Super meccanico💪❤💯👏👏👏👏👏👏👏
🍻🍻✨✨
Great videos. Have you done any VW UP clutches or skoda City go / seat Mii
J.F I don’t think I have. What year did they come out.
They are all the same car all with a common gearbox issue for 1st and reverse the car was produced 2011 to present.
J.F I’ve done quite a bit of the newer ones. I have come across the a few gearbox issues with the end bearing collapsing ... does that sound about right.
Kevin, how come everything seems to go right for you!? everytime i do a job on my car i always run into a nut or bolt or something that stops me dead haha
Martin Blackbird it does get like that sometimes 😆😁.... lots of wd40 .. seems to work like magic.
I need mine doing, where are you based?
www.williamsmobileclutch.co.uk
Top lad
good job
Y ou are strong big man
the clutch will be worth more than the car
Can i ask what grease you use mate on the gearbox shaft (i think its called)
It's red rubber grease
offbeatwarble cheers mate
offbeatwarble can i use this for mine? Its a 2.0tdi audi a3
Cool worker
Rotterdamt Rotterdamt thank you for the review. Always appreciated