How to fix a T-Fal steam iron
Vložit
- čas přidán 20. 07. 2019
- If your iron still under warranty, you should return it. My iron in this video worked fine for 2 years then this problem happened. The automatic shut off sensor which turns off the iron if you forget it for 30 seconds on the clothes, has failed. You either buy a new iron, new sensor, or cancel this feature. In this video, I by-passed the sensor circuit and the iron worked fine.
- Jak na to + styl
Can’t thank you enough for your thorough and simple explanation! I was thinking I would need to purchase another iron. Awesome demonstration!
U r welcome
Hi I’d like to try this with my iron since I think I have same issue. The power light is on but the plate will not heat up. I am just confused when you cut the blue and black wires and you join them . But you said leave the red attached….but thrn later on you have removed the entire sensor? If I’m supposed to leave the red attached …how can I remove the entire sensor. I’m kind of lost.
Perfect thanks 👍🏻 better for the environment to fix things rather than throw them away and buy another one!! Great job!
Did this to our iron, worked exactly as described. soldered and sleeved the two wires. Back to normal now. Just have to take care not to leave it unattended. Thanks. Should last for a while now.
Mine wasnt turning ON at all, the sensor completely failed....
But in my case, I had to cut and connect black and red together! Red is one of the prongs. The sensor is exactly like yours but it was wired blue, black, red instead of yours red, black, blue.
Thanks for the helpful video! 👍
Worked as you demonstrated. THANK YOU!
Great help, many thanks, but for me it was short out red and black. Went off wire positions from the sensor.
Ah ah right on the nail ! My wife is so happy , she thinks i am a genius ! Thank you a lot.
Thanks have a slightly different model but was able to figure out how to fix it based on your video.
Very helpful thank you for posting!
Very useful video. It helped me. ❤
Did you cut the red and put a wire.nut on it? I understood blue and black cut them and put them together and the red where does it go?
Tq man i can fix my tefal steam iron
Hi thanks, my iron is Tefal Ultimatw 3000 W, the sensor is a bit different, as the colours are yellow (instead of red), blue and black, if I cut the sensor and connect the blue and black wires together, what I have to do with the yellow wire then?
Great. However, viewers should follow more on the wire locations than the colors as in my case the colors were different. Choose one central wire and the one which is at larger distance from the central wire.
My iron stopped working,did this to my iron and it started working perfectly fine..
Thanks for your advice. Unfortunately I have a different model and the censor is stored in a different way. I gave it a go but couldn’t solve the problem.
Thanks anyway.😀
Can i try this method to fix my tefal easyglide iron? The problem of my iron is the lamp is continuously on but its not function (didn't hot).
Hi, I'm not sure but I recommend you first check the heater coil. Use a multimeter to check the heating coil resistant or connectivity. If it works (doesn't give Open Loop sign) this is a good news and you may bypass that sensor. The problem may also be in the thermostat that you may replace. Good luck!
Thank you for your suggestion..
Mine is an easy glide and it has the same color wire.
Got exact same problem. It stopped heating after 10min of use. I returned it to Amazon.
Thanks for video, music is too loud in background.
It didn’t work
Errr yeah...that didn't work 😮 cut the blue and black and soldered them together with a heat shrink sleeve and now the iron is completely dead ( same scenario as yours with the sensor and no it's not the fuse of) looks like a new iron is required 😢
Terrible sound. All full up and still can't hear it. And what the hell do I do with the red wire??
For you is better to buy a new one))
Please take off the music you will have more clicks.
Thanks, I removed it.
eliminate the music