Здравствуйте, друг, не могли бы вы сказать мне, есть ли способ смоделировать этот egive в исходном коде стенда или создать что-то, что имитирует это с помощью arduino ??? Спасибо
Еще к стати в китайском флюксе если мерять выходную мощность только на акуме, то не зависимо от вольтажа он будет показывать около 5ти волт, в включенном состоянии, если мерять по мотору то уже норм напряжение) Не знаю баг или фича
Жекос, в общем ждал-ждал когда приедет тебе та флюкс макс - похожая китайская, не выдержал и написал продавану, уж очень хотелось "слайдер" заиметь. Как оказалось там обычный экс на кривой штанге. Такие дела.. Очень хотелось бы узнать, чтобы ты посоветовал из беспроводного по своему вкусу, на что стоит обратить внимание сейчас) Видел твои видео про аву, ну смущает то, что слайдер через время сотрется в каретке, а продается ли он новый с новой кареткой хз) Вы там пен безпроводной не собираетесь делать еще?
AVA не делала машинок со слайдером...всё что у меня было (EP7\EP8\EP9) всё это поворотники на кривой штанге. В плане советов я даже и не знаю....большинство китайцев сейчас делают на кривой штанге (оно логично это самая простая система в плане производства), но это уже надоело и приелось. Систему Flux (поворотник + слайдер) считаю максимально эффективной, но Китайцы не спешат её копировать, а зря...слайдеры встречаются у EZ, в том же Tattoofeel например можно купить все нужные запчасти (эксцентрики, слайдеры и тому подобное). А брать машинку на слайдере стоит только при возможности покупки запчастей, а конкретно - слайдера. Мы беспроводной пэн выпустили уже и всё продали из первой партии, вот он на слайдере. Но за слайдер приходится "платить" регулярным уходом, чего нет в поворотниках. Короче каждому своё.
Учитывая что все наши обзоры это оборудование, которое попало в ремонт, то думаю обзор на Кобру увидите не скоро, поскольку inkmachines делают всегда качественный продукт )
Да с меню они перемудрили,мне каждый день приходится проходить этот квест чтобы выключить батарею, ну и на следующий день перед работой нужно её будить с помощью розетки,… китайцы как то в этом отношении продумали что можно просто выключить. Да к стати,из моих экспериментов с кнопками если зажать одновременно две кнопки регулировки то батарея выключается но всё равно разряжается…
You know the most ridiculous thing is their main complaint is the over night battery drain, but they put the power shut down as the very last option in the menu, it should be first it's going to be the most frequent used option why not have it first in the menu, literally every other option will be used less frequently like how often do you think the artist needs to switch their machine to left or right hand mode , yet still this is ahead of power off option. Mode should be , power , e give , pedal, timer, left/right as the last one . Also why don't I have this battery drain problem on 90% of my other machines even batteries with Bluetooth only fk irons drains on its own I expect better from this company when paying so much money its stupid.
100% I thought the same thing. It’s also a terrible design that if you don’t want it to leak battery to have to turn it off completely and then plug it in again in order onto use it. Imagine a laptop battery that you had to plug into an outlet before you could use it on battery power hahaha. Also, their customer service is clearly people who don’t tattoo ever, very annoying.
@@stressthemindLOTL I really don't get it because literally none of my other batteries even ones with Bluetooth drain that way and I own quite the variety of wireless tattoo crap
There is difference bro with the e give levels on skin i tried and u can feel difference i believe its very minimal maybe by 0.01 amps its about how fast it will react to the skin and drop the voltage.. but i guarantee u they’re not the same bro
Are you a FKI secret agent? In every video about e-Give you write that I'm wrong, that everything works differently on the skin…You are constantly looking for excuses for them. Maybe you just want to believe that it works differently on the skin? I clearly showed how e-Give works depending on the load. This is mechanics and physics, there can be no magic here. All three modes work the same.
@@tatmachine man why ur getting offensive now am a tattoo artist that also understand in electronics and use to build my machines and even wrap my motors,i do that for myself and follow u to support and when i comment on something thats because am trying to highlight and idea that you might maybe didnt make attention,am not sponsored by fk or care about them.and about my comment first thing you are using an inkjecta 12 nominal voltage motor that use half of amperes of what fk irons use in the flux to test and and the e give systeme is extremely sensitive will vary at 0.01 amperes the motor ur using and the way your stoping the cam with ur finger offcours is not gonna show difference..am saying that cz i work with the machine and tested each level of give on skin and it shows a difference..and in the other video u was changing the give and directly testing without giving at least 4 seconds so the machine do the readings and u will get wrong readings so i commented to tell you about..anyway am sorry if my comments bothered you all my goal is to participate and discuss what you are doing but from now i wont i will keep my knowledge for my self :)
@@georgeskeyrouz608 what does the rated voltage of the motor have to do with it? do you really think that the operating voltage of the motor somehow plays a role? Don't make me laugh...I can connect absolutely any motor here, even a brushless or coreless one...at least 6 volts, at least 12 volts. There is no feedback vire in the Flux Faulhaber 2610! Only VCC and GND vires. E-give system works on the principle of CURRENT stabilization, and depends only on the applied load on the motor shaft (no matter what kind of motor you use). What is a 0.01 Ampere load? Where have you seen such a load? The cartridge membrane loads the motor by more than 0.01 amperes...lol, don't write nonsense please... You wrote to me last time that "You had to wait 3-4 sec for the system to analyze"...In this video I was waiting and what? Has something changed? I've talked to many tattoo artists, no one uses this e-give because they don't see the point in it at all. Please write a link to your Instagram, we want to see your works and machines you do
@@tatmachine i dont write no sense and am talking as an artist using the machine put a needle and some ink and try on fake skin the machine response and bog with level 1 and will be more senses with level 2 and the more u add give it will be sensitive am not creating stories and putting non sense comments u can try at urself and see the last level not like the first one.. and when i said its sensitive about 0.01 amperes and u reply mow to tell me the membrane load the motor more than that i dont mean it will start retracting at this amperes..the difference between a level and the other for the motor to start dropping the voltage is maybe that much.. anway not my job to explain whats happening i wish fk reply and tell u exactly how this work but the one thing am sure about is the machine will retract and drop the voltage way faster as soon as the needle touch the skin on the highest egive level than it will on the first u can try that and u will see that am right in what am saying now..use a single needle it will show better the difference and hope u make a video about it
@@tatmachine and one more thing u say what does the motor voltage have to do with it? I didnt say the voltage do but faulhaber make 2 models of these flat brushless motors one is 6volts nominal voltage and the other is 12volts and if u go to the specs of each u will see that the 12volts nominal that u are using require half of the amps that the other one used by fk that was my point that there is difference in how much amps each motor need and the windings of the motors are different thats why the egive work different so understand what am saying before trying to make fun of and show everyone here that u know everything ..i used to respect you a lot and always following what u do and liking all ur videos but seems you get mad when someone discuss an idea with u
а сколько по времени держит акум?
благодарю за ответ
Здравствуйте, друг, не могли бы вы сказать мне, есть ли способ смоделировать этот egive в исходном коде стенда или создать что-то, что имитирует это с помощью arduino ??? Спасибо
What do u think is the best motor or the best machine
Еще к стати в китайском флюксе если мерять выходную мощность только на акуме, то не зависимо от вольтажа он будет показывать около 5ти волт, в включенном состоянии, если мерять по мотору то уже норм напряжение)
Не знаю баг или фича
Жекос, в общем ждал-ждал когда приедет тебе та флюкс макс - похожая китайская,
не выдержал и написал продавану, уж очень хотелось "слайдер" заиметь.
Как оказалось там обычный экс на кривой штанге.
Такие дела..
Очень хотелось бы узнать, чтобы ты посоветовал из беспроводного по своему вкусу, на что стоит обратить внимание сейчас)
Видел твои видео про аву, ну смущает то, что слайдер через время сотрется в каретке, а продается ли он новый с новой кареткой хз)
Вы там пен безпроводной не собираетесь делать еще?
Ты что то пропустил, уже сделали
AVA не делала машинок со слайдером...всё что у меня было (EP7\EP8\EP9) всё это поворотники на кривой штанге. В плане советов я даже и не знаю....большинство китайцев сейчас делают на кривой штанге (оно логично это самая простая система в плане производства), но это уже надоело и приелось. Систему Flux (поворотник + слайдер) считаю максимально эффективной, но Китайцы не спешат её копировать, а зря...слайдеры встречаются у EZ, в том же Tattoofeel например можно купить все нужные запчасти (эксцентрики, слайдеры и тому подобное). А брать машинку на слайдере стоит только при возможности покупки запчастей, а конкретно - слайдера.
Мы беспроводной пэн выпустили уже и всё продали из первой партии, вот он на слайдере. Но за слайдер приходится "платить" регулярным уходом, чего нет в поворотниках. Короче каждому своё.
Будет ли обзор на ink machines cobra 2.Очень бы хотелось узнать ваше мнение о тачке.
Солидарен, жду обзор. Но я уже на следующей неделе буду заказывать кобру
А я пока на кобру не заработал, но обзор также с удовольствием посмотрел бы 🤙
Учитывая что все наши обзоры это оборудование, которое попало в ремонт, то думаю обзор на Кобру увидите не скоро, поскольку inkmachines делают всегда качественный продукт )
Yea inkmachine have good tattoo machine.
With cheyenne unlimited i have only problem. But with flux,scorpion sunskin work perfect. I think scorpion x1 is best in the world for color.
Да с меню они перемудрили,мне каждый день приходится проходить этот квест чтобы выключить батарею, ну и на следующий день перед работой нужно её будить с помощью розетки,… китайцы как то в этом отношении продумали что можно просто выключить.
Да к стати,из моих экспериментов с кнопками если зажать одновременно две кнопки регулировки то батарея выключается но всё равно разряжается…
@fkironsofficial we are waiting for comments
Жэка молодчага,пусть гастон ответит за эти непонятки😁,а то красоты наведут в тачки, а как ими чего пользоваться этими приколами правильно хз👍👍
You know the most ridiculous thing is their main complaint is the over night battery drain, but they put the power shut down as the very last option in the menu, it should be first it's going to be the most frequent used option why not have it first in the menu, literally every other option will be used less frequently like how often do you think the artist needs to switch their machine to left or right hand mode , yet still this is ahead of power off option. Mode should be , power , e give , pedal, timer, left/right as the last one . Also why don't I have this battery drain problem on 90% of my other machines even batteries with Bluetooth only fk irons drains on its own I expect better from this company when paying so much money its stupid.
100% I thought the same thing. It’s also a terrible design that if you don’t want it to leak battery to have to turn it off completely and then plug it in again in order onto use it. Imagine a laptop battery that you had to plug into an outlet before you could use it on battery power hahaha. Also, their customer service is clearly people who don’t tattoo ever, very annoying.
@@stressthemindLOTL I really don't get it because literally none of my other batteries even ones with Bluetooth drain that way and I own quite the variety of wireless tattoo crap
А еще они думают что владельци андроидов нищие и даже програму не сделали🤣 купил тачку полуфабрикатом)
There is difference bro with the e give levels on skin i tried and u can feel difference i believe its very minimal maybe by 0.01 amps its about how fast it will react to the skin and drop the voltage.. but i guarantee u they’re not the same bro
Are you a FKI secret agent? In every video about e-Give you write that I'm wrong, that everything works differently on the skin…You are constantly looking for excuses for them. Maybe you just want to believe that it works differently on the skin? I clearly showed how e-Give works depending on the load. This is mechanics and physics, there can be no magic here. All three modes work the same.
@@tatmachine man why ur getting offensive now am a tattoo artist that also understand in electronics and use to build my machines and even wrap my motors,i do that for myself and follow u to support and when i comment on something thats because am trying to highlight and idea that you might maybe didnt make attention,am not sponsored by fk or care about them.and about my comment first thing you are using an inkjecta 12 nominal voltage motor that use half of amperes of what fk irons use in the flux to test and and the e give systeme is extremely sensitive will vary at 0.01 amperes the motor ur using and the way your stoping the cam with ur finger offcours is not gonna show difference..am saying that cz i work with the machine and tested each level of give on skin and it shows a difference..and in the other video u was changing the give and directly testing without giving at least 4 seconds so the machine do the readings and u will get wrong readings so i commented to tell you about..anyway am sorry if my comments bothered you all my goal is to participate and discuss what you are doing but from now i wont i will keep my knowledge for my self :)
@@georgeskeyrouz608 what does the rated voltage of the motor have to do with it? do you really think that the operating voltage of the motor somehow plays a role? Don't make me laugh...I can connect absolutely any motor here, even a brushless or coreless one...at least 6 volts, at least 12 volts. There is no feedback vire in the Flux Faulhaber 2610! Only VCC and GND vires. E-give system works on the principle of CURRENT stabilization, and depends only on the applied load on the motor shaft (no matter what kind of motor you use). What is a 0.01 Ampere load? Where have you seen such a load? The cartridge membrane loads the motor by more than 0.01 amperes...lol, don't write nonsense please... You wrote to me last time that "You had to wait 3-4 sec for the system to analyze"...In this video I was waiting and what? Has something changed? I've talked to many tattoo artists, no one uses this e-give because they don't see the point in it at all. Please write a link to your Instagram, we want to see your works and machines you do
@@tatmachine i dont write no sense and am talking as an artist using the machine put a needle and some ink and try on fake skin the machine response and bog with level 1 and will be more senses with level 2 and the more u add give it will be sensitive am not creating stories and putting non sense comments u can try at urself and see the last level not like the first one.. and when i said its sensitive about 0.01 amperes and u reply mow to tell me the membrane load the motor more than that i dont mean it will start retracting at this amperes..the difference between a level and the other for the motor to start dropping the voltage is maybe that much.. anway not my job to explain whats happening i wish fk reply and tell u exactly how this work but the one thing am sure about is the machine will retract and drop the voltage way faster as soon as the needle touch the skin on the highest egive level than it will on the first u can try that and u will see that am right in what am saying now..use a single needle it will show better the difference and hope u make a video about it
@@tatmachine and one more thing u say what does the motor voltage have to do with it? I didnt say the voltage do but faulhaber make 2 models of these flat brushless motors one is 6volts nominal voltage and the other is 12volts and if u go to the specs of each u will see that the 12volts nominal that u are using require half of the amps that the other one used by fk that was my point that there is difference in how much amps each motor need and the windings of the motors are different thats why the egive work different so understand what am saying before trying to make fun of and show everyone here that u know everything ..i used to respect you a lot and always following what u do and liking all ur videos but seems you get mad when someone discuss an idea with u
первый епта)
@fkironsofficial This is fiasco bro!