GSI Creos Mr. Procon Boy PS290 0.5mm The Best Airbrush for large surfaces
Vložit
- čas přidán 26. 08. 2024
- Sponsored by newtypehq.com/
Promo code: ITSAGUNPLA to save 10%
→Mah Links←
Twitter ►goo.gl/2cS0uX
Twitch ► / itzagundam
Twitch ► / xiltix
Instagram►goo.gl/6kcLrD
Music ►goo.gl/W5ENUL
Patreon► / itsagundam
E-mail ► gundamprozac@gmail.com
PodCasts ►goo.gl/CEPVab
Channel Art ► www.artstation...
Kit►goo.gl/xqM9HT
Fanatical ►goo.gl/D4FSZ8...
t-shirts by Studio Kasumi ►goo.gl/NAsUUu
#turboDork #airbrush #GSICeros
G.S.I Creos is Mr. Hobby.
And that piece from the airbrush that fits on a spray can is for cans of air u can buy instead of a compressor. If u hook a can of spray paint to it u’ll be pushing paint through everything, really mess-up ur airbrush if u do that.
Love the videos!! Great review!!!
Ho Lee Fuk meant for cans of compressed air you can get at hobby shops. Do not use it for actual spray cans. You will end up having to disassemble the whole airbrush to clean it.
ShinNakon
Yeah, that’s what I said.
@@holeefuk7142 my bad I read that half asleep
No worries.
Gunpla 101 w professor gundam, I wouldn’t know half this shit if it wasn’t for this dude.
papa give, papa teach.
Just ordered this bad boy, but I opted for the additional pistol grip as well. The "fan" tip should make duracoating ARs a breeze. I love what you do Gundam. Never change!!
Same as me. Although I had to do a fair bit of searching for the pistol grip that wasn't massively over priced. Managed to find one on Amazon just waiting for it to arrive
Freaking LOVE this Airbrush, if I need a wet coat that's the one I reach for 8/10 times.
Outside of modulation or preshading its my go to workhorse, yeah you'll be wasting some paint on smaller parts but the end result is second to non in half the time and effort.
One thing worth noting when using the fan cap is you have to find a sweet spot between the paint consistency and the pressure to get an even spray across the entire pattern. 1.5 bar with the normal 1:1.5 for most lacquer seems to be the sweet spot for me
Interesting video. Even if I have no use for this right now, it's always good to see different products and I might consider it later. As a beginner I have to replace my lame airbrush first . Cool video, keep up the great work. Can't wait to see the GM sniper review.
You're not weird, I do the same thing. Airbrushes ain't cheap. I airbrush custom RC bodies and I started with a Master G33 and Master TC40T compressor with tank. Now 3 years later, I've got an Iwata Revolution, Neo CN, Neo BCN, and Neo TRN2. I still have the TC40T compressor and it's been a great compressor,but haven't touched it since mine and my wife's anniversary which was back in January. My wife knew I had been wanting a bigger compressor, so she surprised me with a Kobalt Quiet Tech 26 Gallon compressor for our anniversary and I love that thing!!!. I finally got the itch for a new airbrush, one that can spray a wider pattern than my TRN2 and can shoot out alot of paint, especially Candy paints like Spazstix and Pro-Line, so I decided on this and just ordered it on Amazon for $137. I'm thinking I made a good choice, time will tell. Great video by the way!
Bought one of these 2 weeks ago, it's a beast, totally a great airbrush. Best brush in my collection and I have 3 Iwatas.
thanks man. I have been a huge advocate for Mr. Hobby Brushes on the grounds that they are basically Iwatas. I have this air brush and the .03 with the MAC valve (never use it) an I love it too. definitely not for beginners but if you know how to take care of an air brush this thing makes short work of a lot of things. An I saw the paint cup you mentioned!!! its the size of a balled fist!! when I get to topcoat the unicorn gundam in japan I'm using that. thanks for the vote of confidence. I love my Mr. Hobby Airbrushes.
Thanks for showing the interchangeability of the parts with Iwata.
Very good review. Answered every question I was typing as I watched.
I bought this thing immediately after this and seeing you use in another vid. My gloss paint jobs improved considerably over my iwata eclipse. 10/10 would recommend.
Really enjoy these tool reviews gundam, thanks for taking the time to do them.
No gundam you are correct, as a tactical jet mechanic and painter I approve your style. It's always good to flush your spray gun between color.
Guuuundam, i am soo happy you reviewed this brush. I am looking at getting this. If its good for you, itll be good for me.
I just ordered this for me. Cant wait til I get it.
I was waiting in this one when you mentioned doing a review on it
Might want to try procon boy 3.0 mm platinum version 2
Its recommended for a decent priced airbrush with decent result
Helpful review - thanks for taking the time 👍
To protect the needle better hold the trigger before changing the caps
i mean, it makes sense, but now that you say it i'm mad it makes sense
You dont need do that, the needle is completely blunt
Another great video from Gunpla Ross.
I did a ton of research before buying my airbrush and Mr. Hobby’s are hands down the best buy for present day. Like getting a Ferrari for the price of a Toyota.
Nice vid
You wanna buy the gun handle attachment for this, makes it easier to use.
You keep loosing all this amazing footage I'll have to start calling you a boomer. Seriously, my dude, save the footage.
I love to see your gunpla building set up.
Seems like the perfect air brush for primer coats and top coats. At least in terms of time saver function.
Good choice! 👌👌👌 This is definitely one of my favorite airbrushes!
I find it performs much more consistent with a larger CFM compressor.
I use it with a California Air Tools 1.6 gallon Quiet air compressor that was designed for interior finishing work but works fantastic with airbrushes.
Just add a dedicated airbrush air regulator/filter and you're set. 😤😤😤
I watched again cause you get more and rev also great work
I really like this airbrush, I ended up getting two, one of which is dedicated to clearcoats. The only complaint I have is with the flat spray head. It works great, until one of the tiny air holes on the side get clogged. I've yet to find an easy way to unclog one, mainly because they are not straight-through. Maybe an ultrasonic would work, I dunno.
That's a sexy piece of machinery! Mazel Tov!
Looks a lot like an Iwata Kustom TH!
now called the Iwata Hi-Line HP-TH. very similar brush!
I plan to get this gun too, but already use a miniture spray gun with 0.5mm nozzle , it very work very good too, a little bit cheaper than this airbrush
I have the ps-290 and I use it 90% of the time. I have Iwatas and others but this badboy is the workhorse. Get yourself the pistol grip and its even better!
did you get that cheap looking plastic Iwata grip?
New to the channel and proton boy 290 what compressor are you all using
Oh my.... look at all those FINGERPRINTS on that brush..... I looks like you actually use it! X-D
Pretty sweet airbrush though, for sure. Looks nice!
I Only use iwata stuff here. Just not a sucker and buy it new since it can get expensive. If you look around you can find used stuff that is in great condition from garage sales or online. Think the worst I had was a $5 hp-c that needed a new needle.
You do know that iwata distribute their airbrush and be repackaged and sold by gsi right? They're essentially the same thing, maybe just the internal and Design were different at times
So question what is your normal spraying PSI?
Hi, I got this airbrush and love it now as I sold my badger airbrushes I’m looking for one for detail work and ps 770 0.18 looked a good choice anything else as alternative to consider ?thanks in advance !
Is it good enough to spray cerakote?
love the airbrush but need a new needle tried online but cant find a replacement anyone have any ideas
Fantastic video! How much PSI needs in order to use the fan cap/wide pattern ?(especially for clear coating)
25-30, since it's a 0.5
You must be using a very high psi. I have a Sparmax dual piston compressor with an external tank(1.5g) and I spray with 25psi and my compressor doesn't kick on but every 30-45 seconds while spraying with my 290.
My friends and I call the gp03 lunchbox gundam
hi guys, I have an Iwata smart jet compressor you thing this will work with that compresor or I need a biger one? Thanks in advance.
Fantastic down to earth Vid mate ,no BS ,,,, what’s it like on 2pac lac ?? Cheers 👍🇬🇧👌🇬🇧👍
What psi do you use when using this airbrush?
hi, i recently bought the iwata, i think it's almost the same airbrush. looking for make a 3d print(and design?!!??😕) a grip handle, can't find the original one in my country
I have a 3 liter tank on my compressor - Do you think that is too small?
Anyone recommend a decent compressor for this brush? Will be using it to do burst and fades on guitars as well as painting guitar effects pedals.
It sprays in a cone or fan pattern. That's what the air caps are.
which Iwata parts can you swap out with this? I know its basically an HP-TH
Great video! You airbrush varnish with the wide head on and with how many psi ?
25 should do fine with this
I'm new to air brushing, what's the attachment on the bottom?
I believe it's to catch moister in the airline, before it's introduced into the paint.
Mini water trap/filter
Round and fan spray patterns
What psi you use for that brush.
The Mr Procon Boy series needs more attention. They are a cheaper equivalent to the Iwata airbrushes.
I have the Mr Procon PS-770 which i think is equivalent to the Iwata custom micron, needle is 0.18mm.
Its not for every job, its for painting really small.
Agreed. The iwata cm-b2 is too expensive imho. For that price i can get h&s 0.15 already
@@LMPS5 I know someone who owns both the PS-770 and the H&S 0.15 youre talking about, and he said the 770 is better at spraying small, but the H&S is easier to clean.
Looking to get a good airbrush set up and this pops up, what luck. I paint 24mm-32mm minis (Warhammer, 40K) would this be overkill on the paint output causing puddling and filling? If so, could someone recommend what size needle (I think that is what the 0.5mm is in the title) and I can look from there.
If you're painting miniature, mr hobby ps 289 0.3 should be your choice
whats the attachment on the bottom where the airhose goes? water catch?
Yup
Got to wash it every time.
That's some nice styrofoam, I think it would look good with a fancy wallet on it!
lol I am a subsrciber of ItsAGundam and this is hard to get used to, watched the whole video waiting for the SJW punchline :)
IWATA, NOT 'IAWATA'
THERE'S A GUNDAM DOWN HERE!
0:10
GSI Serios? It's GSI Creos, and not C-Reos/Serios. 🙂
GSI Creos is the company that makes Mr. Hobby and Gunze products.
7:30
RX-78GP03 Gundam "Dendrobium"
Dendrobium... デンドロビウム ... De N Doh Roh Bhee Uh Mu
I wish I had the space & money at home for an air brush set up.
I might paint my kits if I did, but for now, if I have time, I just straight build and do some panel lining.
do you know big chungus???
We as the people. Need. To. Know.
I'm just here for the tips
Almost killed my Iwata by being a retard and not thinning my paint and then letting it dry. Was working on a B-17 and the only zinc chromate I could find wasn't thinned and I forgot to buy thinner. I am a moron.
pronouncing iwata iAwata us killing me
N
Not my taste. Low air pressure is what I'm about.